围压下构造煤的孔隙度和渗透率特征实验研究

利用岩石孔隙度和渗透率测量系统,对不同煤质及不同类型构造煤的孔隙度和渗透率进行测试,结果表明,随围压增加构造煤的孔隙度和渗透率降低;不同煤质和不同类型构造煤有不同的变化规律,并进一步探讨了煤的结构,气体压力,气体成分等因素的作用机理。     

Hydraulic parameters and solute velocities in triple-porosity karstic-fissured-porous carbonate aquifers: case studies in southern Poland

 Rock and flow parameters of three karstic-fissured-porous aquifers in the Krakow-Silesian Triassic formations were measured using various methods and compared. Though cavern and fissure porosities are shown to be very low (cavern porosity below 0.5% and fracture porosity below 0.2%), they contribute dominantly to the hydraulic conductivity (from about 1.3×10^–6 to about 11×10^–6 m/s). Matrix porosity (2–11%) is shown to be the main water reservoir for solute transport and the main or significant contributor to the specific yield (<2%). Though the matrix porosity is shown to be much larger than the sum of the cavern and fissure porosities, its contribution to the total hydraulic conductivity is practically negligible (hydraulic conductivity of the matrix is from about 5×10^–11 m/s to about 2×10^–8 m/s). On the other hand, the matrix porosity (for neglected cavern and fissure porosities) when combined with tracer ages (or mean travel times) is shown to yield proper values of the hydraulic conductivity (K) by applying the following formula: K≅(matrix porosity×mean travel distance)/(mean hydraulic gradient×mean tracer age). Confirming earlier findings of the authors, this equation is shown to be of great practical importance because matrix porosity is easily measured in the laboratory on rock samples, whereas cavern and fracture porosities usually remain unmeasurable. Received: 21 February 1997 · Accepted: 13 May 1997     

陆面过程模型中垂直非均匀土壤的水分传输及相变的模拟

土壤湿度在陆气相互作用中的重要性体现在它既能影响陆地和大气之间水循环的速率, 又能改变地表的能量分配。本文针对陆面过程模型中描述土壤湿度变化的方程进行了理论分析, 指出在非均匀土壤和冻土中采用土壤水势梯度描述垂直非均匀土壤水分流动的合理性。基于描述土壤内部水热传输的统一土壤模型, 并利用推广的表征土壤水分特征的Clapp-Hornberger关系式, 研究了非冻结和冻结的土壤湿度对于垂直非均匀土壤的敏感性。结果表明, 由土壤质地决定的土壤水势和导水率对土壤湿度的模拟有重要的影响。具体地, 在决定土壤性质的Clapp-Hornberger关系式中, 与土壤质地有关的饱和水势、饱和导水率以及土壤孔隙大小分布指数B, 对土壤湿度的模拟起到了关键作用。参数B的重要性尤为突出, 它的增加会引起导水率的大大下降, 从而对水分在土壤中的垂直分布产生重要影响。饱和水势的绝对值和参数B的增加会使得土壤水势绝对值增加明显, 使土壤的结冰(融化)过程延迟, 土壤温度因为没有结冰(融化)释放(吸收)的潜热加热(冷却)而持续下降(上升), 因此在冻融时期土壤温度会比观测值振幅偏大。上述结果揭示了考虑土壤垂直非均匀性并采用有效的土壤特性参数对于陆面过程模型的重要性。     

南海神狐海域水合物三相混合层测井评价方法研究

天然气水合物降压试采过程中,水合物、游离气和水的三相混合层中的游离气首先被采出,从而提高降压效率,促进水合物分解;因此利用岩心刻度测井的方法开展南海神狐海域水合物三相混合层测井评价方法研究,对水合物矿体储量计算以及产业化开采具有重要意义.三相混合层与水合物层相比,其密度和中子孔隙度值均减小,纵波速度明显下降;与气层相比...     

基于地震相分析的孔隙度预测

这里主要讨论在地震相分析下的孔隙度预测。其基本原理是：首先对研究区块进行前期常规解释（合成记录、层位追踪、构造及断层解释）,在此基础上利用地震相分析技术,并结合测井及岩芯资料对研究区进行沉积相带划分,将地震信息转化为地质信息;然后根据相带划分结果,对单一相带中的密度、声波速度与孔隙度井资料进行统计,拟合获得相关最好的波阻抗与孔隙度关系公式,这样多个相带就有不同的孔隙度计算公式;最后通过反演得到的波阻抗计算获得孔隙度。由于在横向上加入了地质解释,所以通过这种方法能够有效结合地质规律,提高三维孔隙度预测精度,还能更好地进行孔隙流体预测及储层评价。     

电性参数在煤层气测井中的应用

在煤层气测井中,利用自然电位和双侧向电阻率可以定性判断含气层位。利用电阻率参数可推算煤层的孔隙度和含气饱和度,结合密度对煤层气可以进行定量计算。．     

Numerical simulation of damage–Permeability relationship in brittle geomaterials

Finding a coupling model between a hydraulic parameter such as permeability and a mechanical parameter such as damage is the key element for several recent engineering problems. A review of the technical literature reveals that several mechanical constitutive laws exist which allow determining a damage tensor for a damageable porous material under loading. But the present work develops a method to deduce the permeability change due to the damage propagation.     

松辽盆地北部中浅层含油饱和度和孔隙度的关系与油气侵位对成岩作用的抑制

为了研究油气侵位对松辽盆地中浅层成岩作用和孔隙度衰减的抑制作用,本文系统的统计和分析了该盆地大量的孔隙度和含油饱和度岩芯分析数据。结果表明,所有探井储层的孔隙度与含油饱和度之间均呈正相关关系,储层含油饱和度越高,孔隙度越大,而且中部含油组合中萨尔图油层、葡萄花油层和高台子油层二者的相关性好于下部含油组合中扶余油层和杨大城子油层的相关性。由此可见,油气注入储层之后,可以有效地抑制储层的成岩作用,保护孔隙,而且油气注入越早,越有利于孔隙的保护。     

东海深井高温高压低孔渗储层钻井技术研究与应用

随着近年东海勘探工作量的迅速增加,钻井深度越来越深,面临着深层高温高压低孔渗地层钻井的一些重大技术难题.针对遇到的难题,分析研究了钻井技术和工艺,主要包括深部复杂压力体系井身结构优化、构建储层保护和井壁稳定性能良好的低自由水钻井液体系、高压低孔渗储层防气窜固井工艺技术、分井段钻井提速配套技术.研究成果应用表明,该套技术较好地解决了钻井过程中出现的问题,保护了储层,提高了时效,满足了产能测试的要求.     

Research on the critical conditions for clay particle release during saline aquifer freshening process

Water sensitivity phenomenon occurs during saline aquifer freshening process in seawater intrusion area, and clay particles released in the phenomenon can damage the infiltration capacity of the aquifer. In order to find out the factors and mechanisms for clay particle release, laboratory column infiltration experiments simulating saline aquifer freshening process were designed to measure the critical conditions(critical flow velocity, critical salt concentration and critical ionic strength) and force analysis for clay particle according to DLVO electric double layer theory was employed to illustrate the mechanisms for particle release. The research results showed that critical flow velocity for clay particle release is influenced by salt concentration of injecting solution. When salt concentration of injecting solution is very high, clay particles are not released, indicating that there does not exist a critical flow velocity in this situation. As salt concentration of injecting solution decreases, particles start to be released. The critical salt concentration for clay particle release is 0.052 mol L-1 in our work, which was determined by a constant-flux experiment for stepwise displacement of high concentration Na Cl solution. The critical ionic strength for clay particle release decreases as Ca2+ molar content percentage of the mixed solution of Na Cl and Ca Cl2 increases following the first-order exponential decay equation y = 0.0391e-0.266 x + 0.0015.