淮南板集煤矿F512断层导水性分析及地面注浆加固

板集煤矿F512断层落差70m,存在着导通上覆新生界松散层水与下伏太原组岩溶水的威胁,同时,断层带的破碎岩体也将对巷道掘进和支护带来困难。该矿先后施工了3个水文地质钻孔进行抽水和压水试验,根据岩心鉴定成果和岩石RQD值,认为断层带的岩心较为破碎;依据抽水过程中的流量变化、水位降深值和水位恢复值等指标及压水试验中透水率分析,发现该断层的导水性较差,具有弱渗透性。参考相邻矿区的经验,决定对断层破碎岩体采用地面注浆方法进行加固。整个工种注入水泥浆1 600m3,破碎岩体得到了有效加固,巷道掘进顺利通过了F512断层。     

沁水盆地南部柿庄南区块煤层气地质特征

以国家科技重大专项《山西沁水盆地南部煤层气直井开发示范工程》成果为依据,以以往的地质勘查及研究成果为参考,对沁水盆地南部柿庄南区块煤层气地质特征进行分析。分析认为南部柿庄南区块构造简单,煤变质程度高、煤层厚度大、埋深适中而且分布稳定,有利于煤层气生成,煤层吸附能力较强,储层渗透率较好,煤层气保存条件好,是沁南煤层气勘探开发最有利区块之一。开发利用该区块煤层气资源,可有效改善地区能源结构、加快区域经济发展,降低后期煤炭开发风险,具有非常可观的社会及经济效益。     

辽河三角洲滨海湿地含水层水文地质参数获取的试验研究

抽水试验是获取水文地质参数的重要方法,为准确获取辽河三角洲滨海湿地潜水含水层的渗透系数,进行了一个抽水孔、两个观测孔的抽水试验。根据单孔抽水试验和多孔抽水试验观测数据,采用潜水非完整井求参公式、巴布什金公式及积分变换等方法计算含水层渗透系数。结果表明,用不同方法计算得出的含水层渗透系数值相差不大。通过试验测定PJ01井组潜水含水层渗透系数为1.15 m/d,PJ03井组潜水含水层渗透系数为0.74 m/d。     

东海深井高温高压低孔渗储层钻井技术研究与应用

随着近年东海勘探工作量的迅速增加,钻井深度越来越深,面临着深层高温高压低孔渗地层钻井的一些重大技术难题.针对遇到的难题,分析研究了钻井技术和工艺,主要包括深部复杂压力体系井身结构优化、构建储层保护和井壁稳定性能良好的低自由水钻井液体系、高压低孔渗储层防气窜固井工艺技术、分井段钻井提速配套技术.研究成果应用表明,该套技术较好地解决了钻井过程中出现的问题,保护了储层,提高了时效,满足了产能测试的要求.     

Extensional deformation structures within a convergent orogen: The Val di Lima low-angle normal fault system (Northern Apennines,Italy)

A low-angle extensional fault system affecting the non metamorphic rocks of the carbonate dominated Tuscan succession is exposed in the Lima valley (Northern Apennines, Italy). This fault system affects the right-side-up limb of a kilometric-scale recumbent isoclinal anticline and is, in turn, affected by superimposed folding and late-tectonic high-angle extensional faulting.The architecture of the low-angle fault system has been investigated through detailed structural mapping and damage zone characterization. Pressure-depth conditions and paleofluid evolution of the fault system have been studied through microstructural, mineralogical, petrographic, fluid inclusion and stable isotope analyses. Our results show that the low-angle fault system was active during exhumation of the Tuscan succession at about 180°C and 5 km depth, with the involvement of low-salinity fluids. Within this temperature - depth framework, the fault zone architecture shows important differences related to the different lithologies involved in the fault system and to the role played by the fluids during deformation. In places, footwall overpressuring influenced active deformation mechanisms and favored shear strain localization.Our observations indicate that extensional structures affected the central sector of the Northern Apennines thrust wedge during the orogenic contractional history, modifying the fluid circulation through the upper crust and influencing its mechanical behavior.     

黔西地区煤层埋深与地应力对其渗透性控制机制

基于黔西六盘水煤田和织纳煤田16口井36层次的试井资料, 采用地质统计分析等方法, 探讨了黔西地区煤储层渗透性的展布规律与地应力特征, 论证了煤层埋深与地应力对其渗透性的控制机制.研究表明, 研究区煤储层以特低渗-低渗透率储层(＜0.1×10-9m2)为主, 中渗透率储层(0.1×10-9~1.0×10-9m2)也占有相当大比例; 应力场类型在浅部表现为大地动力场型, 一定深度可能转化为准静水压力状态.煤储层渗透率及其埋深的负幂指数关系较为离散, 但在不同深度渗透率转折点与地应力场类型转变一致; 单井煤储层试井渗透率差异较大, 随地应力增大和埋深增加而降低, 平面展布受地应力强度控制由SW-NE具"低-高-低"发育规律.埋深对渗透率的控制实质是地应力的控制, 区域构造位置及其所处高应力场作用下的煤体形变与破碎致使孔裂隙压缩或闭合是该区渗透性差异的主要控制机制.      

尾矿库选址勘察渗漏性评价方法探讨

文中阐述了尾矿库选址中的工程地质和水文地质测绘、浅层地震和勘察工程、水文地质试验等对库区渗漏性进行评价的基本方法,并结合工程实例介绍实际工作中如何进行渗漏性评价及重点关注的问题。     

Two methods for pore network of porous media

Two approaches of generating pore networks of porous media are presented to capture the pore fabric. The first methodology extracted pore structure from a computer simulated packing of spheres. The modified Delaunay tessellation was used to describe the porous media, and modified Nelder–Mead method in conjunction with three pore‐merging algorithms was used to generate the pore size and coordination number distributions of the randomly packed spheres. The Biconical Abscissa Asymmetric CONcentric bond was used to describe the connection between two adjacent voids. This algorithm was validated by predicting pore structure of a cubic array of spheres of equal radius with known pore sizes, throat sizes and coordination number distributions. The predicted distributions of pore structure agreed well with the measured. Then, the algorithm was used to predict pore structure and permeability of randomly packed spherical particles, and predicted permeability values were compared with published experimental data. The results showed that the predicted permeability values were in good agreement with those measured, confirming the proposed algorithm can capture the main flow paths of packed beds. The second methodology generated an equivalent pore network of porous media, of which the centers of voids were located in a regular lattice with constant pore center distance. However, this network allowed for matching both main geometrical and topological characteristics of the porous media. A comparison of the two approaches suggested that the second approach can also be used as a predictive tool to quantitatively study the microscopic properties of flow through porous media. Copyright © 2012 John Wiley & Sons, Ltd.     

Pore scale study of permeability and tortuosity for flow through particulate media using Lattice Boltzmann method

In this paper, Lattice Boltzmann method (LBM) has been used to study the effects of permeability and tortuosity on flow through saturated particulate media and identify the relationships between permeability and tortuosity with other parameters such as particles diameter, grain specific surface, and porosity. LBM is a simple kinematic model that can incorporate the essential physics of microscopic and mesoscopic processes involved in flow through granular soils. The obtained results indicate that the 2D LB model, due to its inherent theoretical advantages, is capable of demonstrating that the porosity and specific surface are the most influential parameters in determining the intrinsic permeability of granular media. The obtained results show that particles' size diameter has a two‐fold effect on the coefficient of permeability: one is through specific surface and the other is by tortuosity factor. Numerical study also reveals that tortuosity of granular soils decreases almost linearly with increasing the porosity. Copyright © 2010 John Wiley & Sons, Ltd.     

A model of regional fluid flow: Sand concentration factors and effective lateral and vertical permeabilities

Permeabilities of sand and shale differ by five to seven orders of magnitude. In the depositional pattern characteristic of the Gulf Coast, lenticular sand bodies occur randomly dispersed within a shale matrix, even though they can be grouped into stratigraphic sequences, contributing to net permeability of the sand-shale system and thus facilitating upward flow of pore water. In addition, a substantial lateral flow develops as fluid flow is directed toward sand bodies, thus concentrating fluid from a wide source area into sand bodies of limited lateral and vertical extent. Calculations reported here determine the effect of randomly distributed sands on both vertical and lateral permeabilities of composite sandshale systems. Effective permeabilities depend only on mean sand percent and local variance about the mean, because the effects of sand body shapes and their orientation and dip are not incorporated in the analysis. Results indicate that at a mean sand percentage of 20–50% a large lateral migration of fluid flow develops as sand bodies attract flow from a region two to seven times the radius of the sand body itself. For a mean sand percentage in excess of 50–60%, large vertical migration results and thus hydrocarbon trapping should not be expected for sand percentages in excess of 50–60%. Results of these calculations are in accord with observations that most larger oil accumulations on the Gulf Coast are found in regions having sandiness between about 20 and 50%.