Chemical geodynamics of Western Anatolia

We report major and trace element concentrations and Nd–Sr–Pb isotopic data of 10 post-collisional volcanic domains in Western Anatolia, a seismically active part of the Alpine–Himalayan belt in the Aegean extensional province. Our objective is to provide geochemical constraints for tectono-magmatic processes shaping the late Cenozoic geodynamic evolution of Western Anatolia.

Calc-alkaline volcanic rocks occurring to the north of the Izmir–Ankara–Erzincan suture zone show arc-like trace elements and isotopes and were formed by the melting of the metasomatized Neotethyan mantle-wedge; this process was facilitated by asthenospheric upwelling resulting from slab delamination. Calc-alkaline and alkaline volcanic rocks from within the Izmir–Ankara–Erzincan suture zone also show the imprint of subduction fluids in their major and trace elements, but their isotopic compositions indicate derivation from a metasomatized lithospheric mantle followed by assimilation of ancient crust. Volcanics along the N–S-oriented Kirka–Afyon–Isparta trend were derived from the lithospheric mantle that was metasomatized by fluids from the older subduction of the African plate. Golcuk–Isparta volcanic rocks show an asthenospheric imprint; the latter was a consequence of upwelling following a tear in the subducting African lithosphere. Shoshonitic Kula volcanic rocks show very high trace element concentrations, OIB mantle-like trace elements, and Nd–Sr–Pb isotopic signatures, and were formed by partial melting of the upwelling asthenospheric mantle; this event was synchronous with the Aegean extension and possibly also with slab window formation due to ruptures in the African plate.

Inherent in the above chemical geodynamic models are the high ?_Nd(0) values (+6.4) of the end-member volcanic rocks, implying the presence of an asthenospheric source beneath Western Anatolia that is responsible for the currently observed high heat flow, low Pn wave velocities, high seismicity, and tectonic activity.     

A model for the state of brittle failure of the western Trans-Mexican Volcanic Belt

The Trans-Mexican Volcanic Belt (TMVB) is an igneous arc built above the Middle America subduction zone. Its western section is being extended orthogonally to its axis by several arrays of active normal faults with a combined length of 450 km and including up to 1.5 km of throw. Until now, intra-arc extension in the TMVB has been considered the result of either rifting or retreat of the Rivera and Cocos plates. Observations worldwide and numerical models, however, appear to contradict these ideas. Continental extension in convergent margins takes place where the upper plate moves away from the trench, and the subduction zone is only weakly coupled with the overlying plate. In western Mexico, neither of these relationships applies. A new numerical model presented here is able to explain satisfactorily the state of brittle failure of the TMVB. The model embodies the first-order physics of the northern Middle America subduction zone, and its boundary conditions are consistent with the convergence history of the Rivera and North America plates. Modelling results show that periods of accelerated subduction between the Rivera and North America plates give rise to an increase in suction force under the fore arc. The over-riding plate then bends downwards, building up tensional stress inside the volcanic arc. Failure of the arc follows within 1 million years of pulse initiation. Analysis of the results shows that the steep subduction angle of the Rivera slab, the relief of the volcanic plateau, and the thermal weakening of the lower crust facilitated the failure of the arc. The model demonstrates that a highly coupled subduction zone can cause extension, albeit limited, in the over-riding plate.     

Is there a hidden near surface salt diapir in the Guelma Basin,north-east of Algeria?

The diapiric province of north-eastern Algeria and Tunisia extends NE–SW over several hundreds of kilometres. Available, geophysical and geological investigations were focused on the study of known diapiric outcrop. In contrast to the existing work, our study is focused on to identify a new hidden near surface salt diapir in the Guelma Basin, north-east of Algeria.Integrated geophysical study comprising aeromagnetic, gravimetric and DC resistivity data calibrated with existing well information provides new insights into the geometry of the geologic structure of Guelma Basin. Spatial correlation between magnetic low, strong gravity minimum and resistivity high reveal a hidden near surface salt diapir. The Guelma salt diapir is topped by a local topographic high which follows exactly the underlying salt body. Joint gravity-magnetic modelling indicates that salt is deeply rooted and has a dome-like shape. The Guelma salt diapir was triggered by normal faulting and is directly controlled by regional extension.     

Growth by extension,and reworking,of a south‐western Kalahari linear dune

Optically stimulated luminescence (OSL) dating studies of linear (longitudinal) dunes have been used extensively to elucidate late Quaternary environments and climates in arid or formerly arid regions, yet understanding of the development of such dunes is incomplete. In particular, conflicting opinions have been presented regarding the propensity of linear dunes to migrate laterally, the degree to which they rework their own sediment during accumulation and whether they form primarily by extension, as opposed to lateral sand movement from adjacent interdunes. This study focuses on this last point, although the importance of the other controversies is discussed in context. A simple linear dune in the south‐western Kalahari, which has a prominent termination on a pan (playa) surface, provides an opportunity to directly test hypotheses of dune extension. Chronostratigraphy along a ~600 m transect along the crest of the dune, constrained by 42 OSL ages, reveals that the dune grew by extension on occasions in the late Pleistocene and early Holocene, but has also been subject to reworking along its length, which has continued until recent times. Dune development by extensional growth is suggested to operate under environmental conditions more conducive to net accumulation, whereas reworking is largely independent of conditions throughout the last ~18 ka, and may represent seasonal fluctuations in the position of the dune crest. The relative significance of these two modes of development is suggested to be a key control on the efficacy of linear dunes as archives of environmental and climatic change. Copyright © 2011 John Wiley & Sons, Ltd.     

基于多层递阶和回归分析的单一水位流量关系曲线高水延长方法

测站的水位流量关系由于受到多种因素的影响,没有固定的曲线线型,使得水位流量关系曲线的延长变得较为困难。多层递阶方法将预测系统视为动态系统,具有跟踪系统时变参数的特性,但没能考虑高相关影响因子的重要性。回归分析考虑到了高相关影响因子的重要性,但由于采用定常参数建模,不能反映动态系统时变参数的特性。将多层递阶方法和回归分析方法结合起来,用于单一水位流量关系曲线的高水延长。方法克服了传统的单一水位流量关系曲线高水延长时线型的需要选择、精度难以控制、效率低和不易程序化等缺点,为单一水位流量关系曲线的高水延长提供了一种新途径。     

树根桩在厂房扩建工程地基处理中的应用

在苏南某工业厂房扩建工程中,为了妥善解决新旧熔炉区的不均匀沉降,通过多方案的比选,最终采用树根桩托换技术进行地基加固。并且对新旧熔炉区的基础进行了化学植筋连接和防渗漏处理。     

http://www.sciencedirect.com/science/article/pii/S1674987111000429

The three most crucial factors for the formation of large and super-large magmatic sulfide deposits are: (1) a large volume of mantle-derived mafic-ultramafic magmas that participated in the formation of the deposits; (2) fractional crystallization and crustal contamination, particularly the input of sulfur from crustal rocks, resulting in sulfide immiscibility and segregation; and (3) the timing of sulfide concentration in the intrusion. The super-large magmatic Ni-Cu sulfide deposits around the world have been found in small mafic-ultramafic intrusions, except for the Sudbury deposit. Studies in the past decade indicated that the intrusions hosting large and super-large magmatic sulfide deposits occur in magma conduits, such as those in China, including Jinchuan (Gansu), Yangliuping (Sichuan), Kalatongke (Xinjiang), and Hongqiling (Jilin). Magma conduits as open magma systems provide a perfect environment for extensive concentration of immiscible sulfide melts, which have been found to occur along deep regional faults. The origin of many mantle-derived magmas is closely associated with mantle plumes, intracontinental rifts, or post-collisional extension. Although it has been confirmed that sulfide immiscibility results from crustal contamination, grades of sulfide ores are also related to the nature of the parental magmas, the ratio between silicate magma and immiscible sulfide melt, the reaction between the sulfide melts and newly injected silicate magmas, and fractionation of the sulfide melt. The field relationships of the ore-bearing intrusion and the sulfide ore body are controlled by the geological features of the wall rocks. In this paper, we attempt to demonstrate the general characteristics, formation mechanism,tectonic settings, and indicators of magmatic sulfide deposits occurring in magmatic conduits which would provide guidelines for further exploration.     

偏序向量空间中集值映射的一类扩张定理

经典的Hahn-Banach扩张定理及其推广定理有着非常广泛的应用,但主要都是讨论单值映射的扩张性质。为了进一步讨论多值映射的扩张性质,通过构造的方法,利用了zorn引理及偏序向量空间的完备性,得到了当定义域空间是一个实向量空间,而值域空间是由锥引入序的Dedekind完备的偏序向量空间时集值映射的一类扩张性质,以及当给值域空间引入相应拓扑时连续集值映射的一类扩张性质。其结果进一步推广了Hahn-Banach扩张定理,扩大了其应用范围。     

Plate-driven extension and convergence along the East Gondwana active margin: Late Silurian–Middle Devonian tectonics of the Lachlan Fold Belt,southeastern Australia

The Lachlan Fold Belt of southeastern Australia developed along the Panthalassan margin of East Gondwana. Major silicic igneous activity and active tectonics with extensional, strike-slip and contractional deformation have been related to a continental backarc setting with a convergent margin to the east. In the Early Silurian (Benambran Orogeny), tectonic development was controlled by one or more subduction zones involved in collision and accretion of the Ordovician Macquarie Arc. Thermal instability in the Late Silurian to Middle Devonian interval was promoted by the presence of one or more shallow subducted slabs in the upper mantle and resulted in widespread silicic igneous activity. Extension dominated the Late Silurian in New South Wales and parts of eastern Victoria and led to formation of several sedimentary basins. Alternating episodes of contraction and extension, along with dispersed strike-slip faulting particularly in eastern Victoria, occurred in the Early Devonian culminating in the Middle Devonian contractional Tabberabberan Orogeny. Contractional deformation in modern systems, such as the central Andes, is driven by advance of the overriding plate, with highest strain developed at locations distant from plate edges. In the Ordovician to Early Devonian, it is inferred that East Gondwana was advancing towards Panthalassa. Extensional activity in the Lachlan backarc, although minor in comparison with backarc basins in the western Pacific Ocean, was driven by limited but continuous rollback of the subduction hinge. Alternation of contraction and extension reflects the delicate balance between plate motions with rollback being overtaken by advance of the upper plate intermittently in the Early to Middle Devonian resulting in contractional deformation in an otherwise dominantly extensional regime. A modern system that shows comparable behaviour is East Asia where rollback is considered responsible for widespread sedimentary basin development and basin inversion reflects advance of blocks driven by compression related to the Indian collision.     

Depth dependency of stress ratios during the sedimentation of NW Gyeongsang Basin (Cretaceous), southeast Korea: Estimate of stress parameters and timing of tectonic episodes

The natural stress state in the lithosphere consists of the vertical load and Poisson ratio, and then additional horizontal compression and extension (denoted by Δσ_H and Δσ_T, respectively) are assumed to be superimposed upon this gravitational stress field. The resulting stress state is composed of the maximum, medium and minimum stresses denoted by σ₁, σ₂, and σ₃, respectively. The stress ratio is given as Φ = (σ₂ − σ₃)/(σ₁ − σ₃). A linear relation is found between Φ or 1/Φ and the vertical load in wrench-faulting and extensional stress regimes, respectively. The slope and intercept of the linear relation result in the additional horizontal stresses and level of (average) paleo-surface, respectively. Stress ratio is also determinable by the stress tensor inversion of fault-slip data. The earliest tectonic event (T_1 Event) in the Cretaceous Gyeongsang Basin consists of coexisting E–W compression and N–S extensional faulting episodes. Plots of Φ or 1/Φ against the burial depth (or vertical load) display several linear trends: two clusters in extensional episodes, and two or three clusters in wrench-faulting episodes. Because Δσ_H is assumed to be null or negligible in the extensional regime, Δσ_T is determinable from the slopes of two linear clusters as being −2.5 to −4.0 MPa. In wrench-faulting episodes, the values of Δσ_H are given to be 61.6–101.4 MPa by applying determined additional horizontal extensions. Determined levels of average paleo-surfaces and those of syndepostional structures illustrate that more than five wrench-faulting or extensional episodes have occurred during the T_1 Event, whose active age, consequently, ranges from the Barremian to the Coniacian. This supports that the coexisting coaxial faulting episodes with the same extension may correspond to the alternation of wrench-faulting and extensional episodes.