含交叉断层的复杂地质体3维建模算法研究

在矿井生产中,出现交叉断层的区域往往是地质构造非常复杂的地方,也是危险高发的区域.对含交叉断层的3维地质建模的算法进行了研究.其主要思想是分别建立岩层和断层的TIN模型,以断层交线作为约束条件,进行带约束三角剖分,从而建立起交叉断层模型.这将有利于矿山的工程管理,减少危险的发生,作为后续采矿生产的依据.     

火成岩岩石薄片智能识别及分类方法

在油气勘探、评价及开发中,岩性识别和薄片鉴定是十分重要的基础工作,准确的薄片识别结果可以为勘探和开发提供可靠的依据。传统的人工判定方法或实验室分析方法具有主观性强、效率低、自动化程度低等问题。目前基于内容的智能图像识别技术在准确性和具体应用方面还面临着许多难题。论文基于国内外相关研究成果与油气勘探与开发中岩芯薄片图像的特点及要求,设计并研制成功薄片图像自动识别系统和薄片智能鉴定系统。利用图像梯度分布和色彩分析进行火成岩岩石薄片智能分类,对所有像素进行类别划分进而得到整体的鉴定结果,实现了省时、高效、高精度的薄片智能鉴定成果。     

Recent Activity of the Badu-Longwei Segment, Guguan-Xiangong Fault in Southern Liupanshan, Constrained by Rhythmic Sediment Lithology and Geomorphic Characteristics

This study's objective was to investigate the Guguan-Xiangong Fault, which lies in the southern Liupanshan area, through satellite image interpretation and field observations. Guguan-Xiangong Fault is divided into five subsegments; among these, the Badu-Longwei segment has been the most recently active. The geomorphic features of the Badu-Longwei segment are clearly displayed, including multiple high fault scarps with fresh bedrock free faces. There is significant evidence for Holocene activity of the three fault sections, located in Renhuashu, Tianjiagou, and Xinjiecun respectively. The three sections feature distinct episodic deposition and fault scratches. Based on 14 Cdating and field observations on the three fault sections, two or more paleoearthquakes across the Badu-Longwei fault segment are ascertained, between 5874±116 and 5430±140 a BP, and after 2037±83 a BP respectively. The Badu-Longwei segment of the Guguan-Xiangong Fault is preliminarily extrapolated as the seismogenic structure of the 600 A.D. Qin-Long earthquake.     

The general solution of the HENON–HEILES problem

The general solution of the Henon–Heiles system is approximated inside a domain of the (x, C) of initial conditions (C is the energy constant). The method applied is that described by Poincaré as ‘the only “crack” permitting penetration into the non-integrable problems’ and involves calculation of a dense set of families of periodic solutions that covers the solution space of the problem. In the case of the Henon–Heiles potential we calculated the families of periodic solutions that re-enter after 1–108 oscillations. The density of the set of such families is defined by a pre-assigned parameter ε (Poincaré parameter), which ascertains that at least one periodic solution is computed and available within a distance ε from any point of the domain (x, C) for which the approximate general solution computed. The approximate general solution presented here corresponds to ε = 0.07. The same solution is further improved by “zooming” into four square sub-domain of (x, C), i.e. by computing sufficient number of families that reduce the density parameter to ε = 0.003. Further zooming to reduce the density parameter, say to ε = 10⁻⁶, or even smaller, although easily performable in both areas occupied by stable as well as unstable solutions, was found unnecessary. The stability of all members of each and all families computed was calculated and presented in this paper for both the large solution domain and for the sub-domains. The correspondence between areas of the approximate general solution occupied by stable periodic solutions and Poincaré sections with well-aligned section points and also correspondence between areas occupied by unstable solutions and Poincaré sections with randomly scattered section points is shown by calculating such sections. All calculations were performed using the Runge-Kutta (R-K) 8th order direct integration method and the large output received, consisting of many thousands of families is saved as “Atlas of the General Solution of the Henon–Heiles Problem,” including their stability and is available at request. It is concluded that approximation of the general solution of this system is straightforward and that the chaotic character of its Poincaré sections imposes no limitations or difficulties.     

Composition and assemblage characteristics of magnetic minerals in layer S<Subscript>5-1</Subscript> of Xifeng and Duanjiapo sections

Relatively strongly magnetic fine components (< 30μm, XS-4J and DS-4J) which are most environmentally sensitive were separated from layer S_5-1 in the Xifeng and Duanjiapo loess sections and analyzed by MPV-3 for their morphometric characteristics and reflectance, SEM-ESD for their element contents and XRD for their mineral phases, respectively. The results showed that minerals in both samples are dominated by detrial Fe-Ti oxides of aeolian origin. In sample XS-4J the reflectance and iron contents of magnetic minerals are usually high. In addition to magnetite (Fe₃O₄), maghemite (γFe₂O₃) and hematite (Fe₂O₃), some Fe-high oxide (72.25 wt%–86.67 wt%), ilmenite (FeTiO₃), and magnetite-ulvöspinel [Fe(FeCr)O₄, Fe (FeNi)O₄] were also detected. In sample DS-4J obvious negative linear correlations were found between Ti and Fe, and the contents of Mn, Si, Al and Ca are usually high and the minerals are dominated by magnetite (maghemite), goethite (FeOOH) and limonite (containing Si and OH). In addition, the signs of corrosion of magnetic minerals and newly crystallized magnetite (maghemite) were recognized. Differences in the composition and assemblage characteristics of magnetite minerals between XS and DS reflect significant differences in source rocks and preserving conditions.     

Deep structure of the Amur lithospheric Plate border zone

Based on the study of the deep Amur Plate border structure, seismogravimetric (density) and geoelectric sections of the plate lithosphere crossing geologically and seismically defined plate boundaries are compiled to construct a three-dimensional model of its lithosphere. The model demonstrates the almost ring structure of the plate with its inner part dipping for 50 km and uplifted fringing. The plate boundary zone consists of orogenic belts (Mongol-Okhotsk, Selenga-Stanovoi, Transbaikal, and Sikhote-Alin) and margins of the Siberian and North China platforms. The plate boundaries are described by mantle diapirism models with a largely bilateral inclined dip of its bordering belts.     

Crustal structure of the Alpine–Pannonian transition zone: a combined seismic and gravity study

 The crustal structure of the transition zone between the Eastern Alps and the western part of the Pannonian depression (Danube basin) is traditionally interpreted in terms of subvertical Tertiary strike-slip and normal faults separating different Alpine tectonic units. Reevaluation of approximately 4000-km-long hydrocarbon exploration reflection seismic sections and a few deep seismic profiles, together with data from approximately 300 wells, suggests a different structural model. It implies that extensional collapse of the Alpine orogene in the Middle Miocene was controlled by listric normal faults, which usually crosscut Alpine nappes at shallow levels, but at depth merge with overthrust planes separating the different Alpine units. The alternative structural model was tested along a transect across the Danube basin by gravity model calculations, and the results show that the model of low-angle extensional faulting is indeed viable. Regarding the whole lithosphere of the western Pannonian basin, gravity modelling indicates a remarkable asymmetry in the thickness minima of the attenuated crust and upper mantle. The approximately 160 km lateral offset between the two minima suggests that during the Miocene extension of the Pannonian basin detachment of the upper crust from the mantle lithosphere took place along a rheologically weak lower crust. Received: 13 July 1998 / Accepted: 18 March 1999     

荧光淬灭剂TrueBlack Lipofuscin对珊瑚自体荧光的消除及其在免疫荧光标记中的应用

自体荧光是生物体内部组织成分在吸收光时自然发出的荧光,会影响人工标记荧光的有效识别,严重干扰对抗体标记的目的蛋白荧光的观察及数据分析,在珊瑚冰冻切片免疫荧光标记研究中尤为突显。为更有效地去除珊瑚组织切片中的自体荧光,本研究以共生模式种花伞软珊瑚（Xenia sp.）为研究对象,首次尝试在花伞软珊瑚冰冻切片免疫荧光染色中,使用一种在小鼠和人体组织切片中常用的TrueBlack Lipofuscin自体荧光淬灭剂,并与已有研究中的酒精梯度脱水法进行比较。结果表明,使用荧光淬灭剂TrueBlack Lipofuscin后,花伞软珊瑚组织切片中的自体荧光强度是传统的酒精梯度脱水法的52.4%,且在Cy5通道下效果最佳。同时,通过珊瑚免疫荧光标记实验表明使用TrueBlack Lipofuscin的实验组特异性荧光信号强度为对照组的205.3%,背景荧光和自体荧光基本去除。     

水工地下大洞径断面开挖轮廓线监理检测

隧洞断面开挖放样是直接为施工服务的,而检测工作是监理人员必须的工作。监理人员结合测量仪器和计算工具,依据具体的施工图纸进行隧洞断面开挖检测验收,检查开挖断面尺寸,核定超挖部分回填混凝土量。本文就海原县石峡口水库水工建筑物地下大洞径隧洞断面开挖后的检测计算方法作了论述,找出了解决该问题的办法,希望为类似工程监理及施工工作起到抛砖引玉的作用。