带横隔板局部开孔沉箱在斜向波作用下的受力研究

基于线性势流假定,对斜向波作用下带横隔板局部开孔沉箱防波堤的水平波浪力进行了理论研究。给出了开孔沉箱法向水平力和横隔板受力的理论计算方法,在极限情况下波浪力的计算结果与文献中的已有结果一致。利用数值算例分析了开孔沉箱总水平力的主要影响因素。开孔沉箱法向总水平力的减小主要集中于结构上半部分波浪影响范围以内。增加单个开孔沉箱的长度有利于减小结构所受总水平波浪力。当波浪入射角或沉箱前开孔墙孔隙影响系数幅值较大时,开孔沉箱横隔板上总水平力的最大值要超过相应的沉箱法向总水平力,此时要注意横隔板的强度问题。     

Numerical Simulation of Large Diameter Cylindrical Structure Slamming

The water entry of large diameter cylindrical structure is studied by applying numerical simulation method. The processes of different diameter cyhndrical structures impacting water with various constant velocities are calculated numerically. Thereafter, analyzed are the distribution of slamming pressure on structure during slamming course and the influence of slamming velocity and cylindrical diameter on slamming process. Furthermore, presented herein is an equation being used to forecast the peak slamming force on a large diameter cylindrical structure.     

水下滑翔器主体外形优化设计

对水下滑翔器主体外形的优化设计问题进行研究.首先,在考虑内部机械结构限制的条件下,建立了主体外形优化数学模型,并采用CFX计算了若干主体形状的绕流阻力.在此基础上建立了映射主体外形的尺寸参数与绕流阻力的BP神经网络.然后将建立的神经网络作为优化设计问题的目标函数,采用坐标轮换法对滑翔器主体外形进行了优化设计,确定了尺寸参数的最优解.     

The role of Coriolis in sandbank formation due to a headland/island system

Tidal flow past a headland was modelled and the resulting sandbank formation due to bedload transport by eddy systems was examined with particular emphasis on the role of Coriolis. The headland configuration was extended to the more complex case of a headland with a detached island and the role of Coriolis in sandbank formation was again examined. In the headland case, the contribution of Coriolis resulted in the expected change in bed level at the centre of the residual eddies (positive contribution for the cyclonic eddy and negative change for the anticyclonic eddy). In the headland/island case, the role of Coriolis in the resulting bed level change was a function of eddy shedding from the island, defined by the island wake parameter. When eddy shedding occurred, the inclusion of Coriolis had a large magnitude effect on creating flood/ebb sandbank asymmetry. When eddies remained attached to the island, Coriolis had a minor role in the magnitude of this asymmetry.     

Modelling of the passive turning of a turret moored vessel in conditions of compact ice

The concept of the offshore oil and gas field development using floating ship-shaped platforms, frequently named floating production units (FPU further), with turret mooring is widely used in the world, including regions with harsh environment. The direct transfer of this concept to the Arctic seas is not possible, mostly due to the difficulties of maintaining a weathervaning, or passive turning regime in heavy ice conditions. The main danger relates to the fact that the expected FPU rotation under the action of high ice loads can be accompanied by a translational displacement of the FPU away from the mooring point. As a result, the mooring system may reach an overloaded state until the FPU turns to a favourable position relative to the ice drift direction. In the paper, we are focused on the investigation of a mathematical model of the passive FPU turning on a spot under the assumption that the ice cover is described by a rigid-plastic continuum. The study is performed both analytically and by numerical simulations. A number of specific FPU motion patterns are analytically derived from the model in quasi-static approximation in the form of successive limit states of the system FPU – ice continuum. Some results of the corresponding numerical simulation are presented that confirm the existence of similar solutions in the full dynamic setting of the problem. A partial parametric analysis of the problem is also performed.     

Wave energy conversion under constrained wave-by-wave impedance matching with amplitude and phase-match limits

This paper investigates an approach to limit the fullness of ‘tuning’ provided by wave-by-wave impedance matching control of wave energy devices in irregular waves. A single analytical formulation based on the Lagrange multiplier approach of Evans [1] is used to limit the velocity amplitude while also limiting the closeness of the phase match between velocity and exciting force. The paper studies the effect of the present technique in concurrently limiting the device velocity and the required control/actuation force. Time domain application requires wave-profile prediction, which here is based on a deterministic propagation model. Also examined in the time domain is the effect of possible violation of the displacement constraint, which for many designs implies impacts at hard stops within the power take-off mechanism. Time domain simulations are carried out for a 2-body axisymmetric converter (with physical end-stops) in sea states reported for a site off the US east coast. It is found that the approach leads to effective power conversion in the less energetic sea states, while as desired, considerable muting of the optimal response is found in the larger sea states. Under the assumptions of this work, the end-stop collisions are found to have a minor effect on the power conversion. The present approach could be used to guide the design of power take-off systems so that their displacement stroke, maximum force, and resistive and reactive power limits are well-matched to the achievable performance of a given controlled primary energy converter.     

Measurements of higher harmonic wave forces on a vertical truncated circular cylinder

Wave forces on a vertical truncated circular cylinder in Stokes waves with the wave slopes ranging from 0.06 to 0.24, are measured in a wave tank. The higher harmonic wave forces are compared with the available values from theories of the FNV (Faltisen–Newman–Vinje) model and Varyani solution. The first harmonic horizontal forces measured are much larger than the theoretical values from the FNV model, while the first harmonic vertical forces are well predicted by the Varyani theory. It was also found that the FNV model significantly overpredicts the second harmonic horizontal forces in high frequency waves, but under predicts the third harmonic forces. The differences between the actual measurement and the theory, in the second and third harmonic horizontal forces, become smaller at low wave frequencies as the wave slope increases. In addition, the transverse instabilities in the incoming waves with high wave slope were observed, which is due to the nonlinear modulation. Measurements were, thus, carried out before the instability occurred.     

Experimental studies on the slowly varying drift motion of a berthed container ship model

The effects of free-surface waves on the floating structures are of great importance in the offshore industry. Among the six degrees of motions of a surface ship the absence of restoring forces in surge, sway and yaw led to critical situations for moored ships in the recent times. The order of forces in horizontal plane and their exciting frequencies are matters of interest. The resonance with the presence of moored chains led to many accidents in the recent past. The lines in dry conditions may not give good damping and in wet condition they may trigger the system to chaotic motions and jumps. Two different loading conditions of a container ship model are tested with waves in laboratory conditions in two different drafts. The mooring lines are chosen as per scale law and the energy under the response spectrum is determined from the plots. The results give new insights into the movement of a berthed ships subjected to waves. Response of the moored ship to different loading conditions in different water depths are discussed in this paper. The paper gives the order of energy due to first-order and slowly varying movement of a berthed container model in a towing tank.     

基于面板数据的海洋环境污染对海洋经济发展影响的实证研究

文章基于我国沿海11个省(自治区、直辖市)海洋环境和海洋经济的面板数据,将海洋产业结构和海洋产业劳动力要素投入作为控制变量,构建双对数面板数据模型,就海洋环境污染对海洋经济发展的影响进行实证分析。结果表明:海洋环境污染与海洋经济发展存在负相关关系,海洋产业结构与海洋经济发展存在正相关关系,海洋产业劳动力要素投入与海洋经济发展存在负相关关系。基于此,为促进海洋经济的可持续发展,提出加强海洋环境保护和治理、优化升级海洋产业结构以及培养和引进海洋专业人才的建议。     

Performance investigation of a two-raft-type wave energy converter with hydraulic power take-off unit

Raft-type wave energy converter (WEC) is a multi-mode wave energy conversion device, using the relative pitch motion to drive its hydraulic power take-off (PTO) units for capturing energy from the ocean waves. The hydraulic PTO unit as its energy conversion module plays a significant role in storing large qualities of energy and making the output power smooth. However, most of the previous investigations on the raft-type WECs treat the hydraulic PTO unit as a linear PTO unit and do not consider the dynamics of the hydraulic circuit and components in their investigations. This paper is related to a two-raft-type WEC consisting of two hinged rafts and a hydraulic PTO unit. The aim of this paper is to make an understanding of the dynamics of the hydraulic PTO unit and how these affect the performance of the two-raft-type WEC. Therefore, a combined hydrodynamic and hydraulic PTO unit model is proposed to investigate and optimize the performance of the two-raft-type WEC; and based on the simulation of the combined model, the relationships between the optimal power capture ability, the optimal magnitude of the hydraulic PTO force and the wave states are numerically revealed. Results show that an approximately square wave type hydraulic PTO force is produced by the hydraulic PTO unit, which causes the performance of the two-raft-type WEC not to be sinusoidal and the energy capturing manner different from that of the device using a linear PTO unit; moreover, there is an optimal magnitude of the hydraulic PTO force for obtaining an optimal power capture ability, which can be achieved by adjusting the parameters of the hydraulic PTO unit; in regular waves, the optimal power capture ability as well as the optimal magnitude of the hydraulic PTO force normalized by the wave height presents little relationship with the wave height, mainly depends on the wave period; in irregular waves, the trends of the optimal power capture ability and the normalized optimal magnitude of the hydraulic PTO force against the peak wave periods at different significant wave heights are generally identical and show a good correlation. All means that the hydraulic PTO unit of the two-raft-type WEC can be tuned to the wave states, and these would provide a valuable guidance for the optimal design of its hydraulic PTO unit.