高岭石与碱剂作用后反应液中硅铝元素变化规律研究

本文系统地研究了高岭石与碱剂间的作用对反应后的液相参数进行全面测定，以查清温度，反应时间，碱性驱替剂的种类浓度等因素与液相参数和固相参数的关系。提出高岭石的非一致性溶蚀趋势，并探讨高岭石与碱性驱替剂的作用机理，丰富了化学驱油过程中化学剂与矿物作用方面的基础理论。     

Optimal weighting in the finite difference solution of the convection-dispersion equation

Oscillation and numerical dispersion limit the reliability of numerical solutions of the convection-dispersion equation when finite difference methods are used. To eliminate oscillation and reduce the numerical dispersion, an optimal upstream weighting with finite differences is proposed. The optimal values of upstream weighting coefficients numerically obtained are a function of the mesh Peclet number used. The accuracy of the proposed numerical method is tested against two classical problems for which analytical solutions exist. The comparison of the numerical results obtained with different numerical schemes and those obtained by the analytical solutions demonstrates the possibility of a real gain in precision using the proposed optimal weighting method. This gain in precision is verified by interpreting a tracer experiment performed in a laboratory column.     

Conductivity of NaCl solution at 0.4–5.0 GPa and 25–500 °C

NaCI-H₂O is the most fundamental ternary system in geology. Until now, the measurements of electrical conductivity of NaCl solutions are still little at high pressures (> O.5 GPa) We measured the conductivity of 0.01 m NaCl solution at 0.4–5.0 GPa and 25-500°C. The results are consistent with that of Quist and Marshall (1968) at 0.4 GPa. The conductivity of NaCl solution increases with increasing temperature. The results also show that the conductivity of NaCl solution changes little with increasing pressure below 1.5 GPa and changes rapidly with increasing pressure above 1.5 GPa. The rapid increase of the conductivity of NaCl solution may play an important role in many geological processes (such as the genesis of ore deposits under hydrothermal condition) and other fields. Project supported by the National Natural Science Foundation of China.     

变差函数参数的计算

为了求出地质统计学中变差函数理论模型的参数，首先把相应模型化成线性函数的形式，多面手应用线性方程组非负解的理论计算出它的参数。     

陕南勉宁略地区铜厂铜矿地球化学特征

通过对陕南铜厂铜矿的地球化学研究，笔者认为铜矿矿区对应的大地构造环境应为岛弧及其活动大陆边缘，细碧岩的原岩为钙碱性大陆系列，随着海西早期闪长岩的侵入，带来了汽液，热动力和部分成矿物质，形成富含有Ｃｌ，Ｎａ和Ｋ岩浆热液与天水的混合热液，在这种混合热液的作用下，使地层－晚元古代郭家沟组细碧岩和海西早期闪长岩中Ｃｕ等成矿物质活化，并以Ｃｌ等络合物形式搬运，在闪长岩体内接触带的构造片理化中富集成矿，本矿床     

任意圆弧形凸起地形中隧洞对入射平面SH波的影响

借助辅助函数的思想， 采用波函数展开法给出了圆弧形凸起地形中隧洞对入射平面SH波影响问题的一个解析解．数值结果表明，凸起地形中隧洞的存在以及隧洞大小，对凸起地形表面运动，以及凸起地形中的隧洞的动应力集中均具有显著影响．      

O(T2)精度下椭球界面Dirichlet边值问题的积分解

研究了边界是参考椭球面的Laplace方程Dirichlet边值问题的求解，在O(ε4·T)精 度下给出了参考椭球界面上扰动重力位Dirichlet外问题的积分解式. 该结果理论上优于目 前常用的球近似下的积分解式，从而为研究物理大地测量中边值问题的求解提供了新的依据     

3-D rheologic model of earthquake preparation (II): Strain field and its applications

Introduction Based on the elastic theory of the hard inclusion (Dobrovolskii, 1991), we developed an inclusion theory of rheologic medium, and applied the results of bulk-strain field of a rheologic inclusion model to explain the spatial-temporal evolution process of earthquake precursors (SONG, et al, 2000). In the former paper (SONG, et al, 2003), we derived the viscoelastic displacement field of the rheologic inclusion model on the basis of the analytic expression of displacement field o…     

Polymetallic Mineralization at the Suttsu Vein-type Deposit, Southwestern Hokkaido, Japan

Abstract. The Suttsu polymetallic vein-type deposit, hosted by tuff, tuff breccia and shale of the Miocene Kunnui Formation and propylitized hornblende-augite andesite, is located in southwestern Hokkaido, Japan. It has been exploited and explored for Cu, Pb, Zn and Ag until 1962.
In this study, we examined K-Ar ages, ore mineralogical characteristics and fluid inclusions to obtain new data for the deposit.
The K-Ar ages on sericite indicate that the polymetallic mineralization occurred in Late Miocene (8.1–5.7 Ma). The polymetallic banded ore from the Ohkubo vein is characterized by an abundance of Au, Ag, Sn, Bi, in, Se and Te. These metals are mainly ascribed to electrum (30.3–37.8 atom% Ag), Se-bearing pavonite (8.5–9.5 wt% Se), gustavite-lillianite solid solution, Se-bearing bismuthinite (5.0–5.3 wt% Se), kawazulite, cassiterite, Sn-bearing chalcopyrite (3.3–4.2 wt% Sn), In-bearing stannite, stannite-chalcopyrite solid solution, and In- and Sn-bearing sphalerite (2.6–8.4 wt% In and 1.8–4.3 wt% Sn), occurring in narrow bands of the ore. The In- and Sn-bearing sphalerite likely forms a sphalerite-roquesite-stannite solid solution with the contents of roquesite and stannite being about 2–9 and 2-A mole%, respectively. Temperatures and salinities (in wt% NaCl equiv.) of the ore fluids are estimated to be 180-250C and 3–4 wt%, respectively. The Sn-bearing chalcopyrite therefore probably precipitated metastably. The geologic and mineralogical features suggest that pre-Tertiary basement rocks rich in organic material underlie the Miocene Kunnui Formation nearby the deposit and that they contributed to local and temporary reduction of magnetite-series magmas favorable for the early stage tin-polymetallic mineralization.     

Experimental pressure solution compaction of synthetic halite/calcite aggregates

Experimental observations are reported of weakening of sediment-like aggregates by addition of hard particles. Sieved mixtures of calcite and halite grains are experimentally compacted in drained pressure cells in the presence of a saturated aqueous solution. The individual halite grains deform easily by pressure solution creep whereas calcite grains act as hard objects and resist compaction. The fastest rate of compaction of the mixed aggregate is not obtained for a 100% halite aggregate but for a content of halite grains between 45% and 75%. We propose that this unusual compaction behavior reflects the competition between two mechanisms at the grain scale: intergranular pressure solution at grain contacts and grain boundary healing between halite grains that prevent further compaction.