小岩头滑坡稳定性分析

小岩头滑坡位于贵州省威宁县二(连浩特)河(口)高速公路K255 010~K255 240里程右侧,属一个大型古滑坡,发育于二叠系上统峨嵋山组玄武岩(P2β)地层中。在高速公路施工中对路堑进行深挖削坡,可能导致古滑坡中部、线路右侧斜坡失稳破坏,发生滑坡。因此,滑坡稳定性评价是重大工程地质问题之一。根据大量勘察试验资料,系统地揭示了滑坡的特征,分析了滑坡形成的控制因素、成因和形成机制,建立了滑坡体稳定性计算模型,利用反演计算法进行稳定性分析与评价,认为两滑体均处于滑动失稳状态。建议对滑坡体进行处理,采用排水、支挡、减压等措施进行整治。     

交互的初至波反演及静校正

一种人机交互式的初至波反演方法是在反演过程中加入人为的干预,并利用人的经验控制反演的方向,使结果更加符合实际的地质情况。再将反演的结果与其它的短波长静校正方法相结合,就能够有效地提高静校正的精度。实例证明,这种方法是有效且可行的。     

CCSD主孔1113~1600 m花岗质片麻岩单元的变形构造特征

中国大陆科学钻探(CCSD)主孔2000m岩性剖面揭示了1113～1600m花岗质片麻岩段为地表北苏鲁超高压花岗质变质岩剪切构造叠覆岩片中的石湖镇构造岩片的花岗质片麻岩的下延部分。本单元之上下界线为韧性剪切带,内部发育小型韧性剪切变形,仅局部可见旋转碎斑体系等剪切指向标志,以SE向NW的逆冲剪切指向为主,其次为NW向SE的正滑剪切指向,并主要发育于较软弱夹层内,后者成为苏鲁地区存在伸展型穹隆构造的新证据;在1140～1280m岩性段内发育断续、较弱的拉伸线理,拉伸线理总体向SE倾伏,倾伏角为10～36°;花岗质片麻岩单元内部分石英以多晶石英条带的形式存在,花岗质片麻岩主要矿物长石基本没有动态重结晶现象,仅具较弱的形态拉长特征(X∶Z=2左右),总体面理倾向170°E,倾角平均20°,明显不同于其他岩性单元内的面理产状,可能主要代表折返变形之前的近东西向构造,而其他岩性单元受折返变形影响较大,其面理产状主要代表折返阶段形成的NE-NNE向构造;运用电子背散射(EBSD)技术进行石英组构分析并与费氏台测定对比,表明1113～1600m花岗质片麻岩单元经历了中—低温变形,局部残留有高温组构,剪切指向主要为SE向NW的逆冲,其中高温组构与中温组构均显示为SE向NW的逆冲剪切指向,反映折返早期与折返主期岩片的相对剪切方向一     

韧性剪切变形对岩石地球化学行为的制约——以北阿尔金巴什考供韧性剪切带为例

韧性剪切变形对岩石地球化学行为的制约一直是地质学家们探讨的课题。本文以构成北阿尔金红柳沟——拉配泉俯冲碰撞杂岩带与北阿尔金地块边界的巴什考供斜向逆冲型韧性剪切带为例，通过对韧性剪切带内花岗岩变形前后不同变形强度构造岩的地球化学组成进行对比，确定等比线斜率，探讨韧性变形对岩石体积和成分变异的影响。计算结果表明，在糜棱岩化过程中，糜棱岩化花岗岩体积亏损21％，花岗质糜棱岩体积亏损31％。质量平衡计算结果和等比线图表明，韧；陛剪切作用导致SiO2，流失量最大，A12O3、K2O及Ba、Rb、Sr等都有不同程度的丢失，显示出较强的活动性，MnO、P2O5、Sc位于等比线上或附近，表现出相对的稳定性。岩石中活动组分的变异是流体渗滤作用引起的，不活动组分的变异是体．积亏损造成的。     

内蒙古大青山地区寒武系与奥陶系之间的一个重要的层序界面

大青山地区寒武纪－奥陶纪地层分布零星，是由中生代逆冲推覆构造就位于此的一系列近东西向延展的构造岩片组成。下寒武统色麻沟组直接覆盖在太古界变质岩之上，缺失中元古界什那干群，寒武系与奥陶系之间呈假整合接触，标志着区内寒武纪与奥陶纪之间发生过一次抬升构造运动，其形成机制与古亚洲洋内的稳定陆快向华北板块拼贴事件有关，是早奥陶世末期华北板块整体抬升的序幕。这个层序界面的认识，对于恢复华北板块北部边缘构造演化历史具有重要意义。     

万家寨引黄工程泥灰岩段隧洞岩石掘进机(TBM)卡机事故工程地质分析和事故处理

隧道全断面岩石掘进机 (TBM )的施工对地质条件适应性是一个不断认识和深化的过程 ,其中很多认识是来自已发生的各种各样事故和对事故原因的理性认识。本文是在对某隧洞TBM卡机地段的岩性 (包括工程性质 )、构造、地应力及其在TBM施工条件下的变化等方面进行工程地质力学研究的基础上 ,指出层间剪切带的存在及由此而产生的较大变形速率是导致事故发生的工程地质原因 ,并提出了相应的处理意见和建议。TBM卡机问题的顺利解决和它重新开始快速掘进证明了作者分析和工程处理措施的合理性。本文的分析有助于加深TBM施工对复杂地质条件适应性的认识 ,并可望为避免类似事故的再次发生提供参考和借鉴。     

Pseudotachylytes in the southern border fault of the Cenozoic intracontinental Teletsk basin (Altai, Russia)

The Cenozoic intracontinental Teletsk basin in the Central Asian Altai Mountains is composed of a complexly structured northern and a more simple southern sub-basin. These sub-basins formed in two distinct kinematic stages when first the NNW-striking Teletsk- and then the NE-striking West-Sayan shear zones became reactivated in the Cenozoic under dominant NS-oriented horizontal compression. Although the entire Teletsk basin strikes roughly NS, the southern sub-basin is parallel to the NNW-trending, amphibolite facies Teletsk ductile shear zone, while the northern sub-basin is NS-striking and flanked by differently structured, greenschist facies basement. Basement reactivation closely controlled the southern sub-basin formation, but this is less clear for the northern sub-basin. Contrasts between northern and southern basement and the exclusive occurrence of pseudotachylytes along the margins of the southern basin are explored for their contribution to the formation of the Teletsk basin with two distinct sub-basins.In the ductile shear fabric of the basement flanking the southern sub-basin, concordantly interleaved pseudotachylytes and isolated breccia lenses reflect local brittle deformation along the ductile fabric. The genetic link between breccia lenses and pseudotachylyte occurrences was defined by microstructural investigation. It allows to explore their possible development in a dextral strike–slip zone. These rocks occur in a large fault-bounded segment of the basement. The geometry of the structures in the segment is comparable with a dextral strike–slip sidewall-ripout structure along the Teletsk shear zone. Seismic slip related to pseudotachylytes is attributed to the sudden stress release on the NNW-striking Teletsk shear zone, when the latter became unconstrained by reactivation of the NE-trending West-Sayan fault zone at its northern boundary. The boundary of the sidewall-ripout structure was reactivated as a large listric fault in a later stage. The northern sub-basins roughly develop along an NS strike and are assumed to reflect reactivation of the ductile shear zone underneath the variably structured greenschist facies basement outcropping along the flanks of the sub-basin.     

Sm-Nd ISOTOPIC AGE OF LAMPROPHYRES IN THE GEZHEN GOLD-BEARING SHEAR ZONE ON HAINAN ISLAND AND ITS GEOLOGICAL IMPLICATIONS

Sm-Nd isotopic compositions of eight lamprophyre samples, which come from the Gezhen gold-bearing shear zone on western Hainan Island, are measured. The Sm-Nd isochron age is 495.98±13.14 Ma, (143Nd/144Nd) 0=0.512094, εNd(t) ranges from +1.80 to +2.00 and TDM from 982 Ma to 1196 Ma (average: 1060 Ma). The authors point out that the whole-rock Sm-Nd isochron age (495.98 ± 13.14 Ma) really represents the petrogenetic age of lamprophyre and the time of magmatism during subsequent subduction.     

A comparison of tectonic ambient shear stress value in China with that in western USA

Introduction The stress status of the earths crust is closely related to global structure, the direction of plate movement, the drive mechanism of plate, earthquake cause, etc. Therefore the researches of the stress status of the earths crust and the process of dynamic evolution are paid a great attention to by many people around the world (Zoback, Zoback, 1980; Zoback, et al, 1989; Zoback, 1989; Spence, 1997; Fuchs, 1997; Plenefish, Bonjer, 1997; Muller, et al, 1997; XU, et al, 1989; WAN…     

中国与美国西部平均构造剪应力值的比较

提出了一种估计一个地区平均构造剪应力值的方法．用这种方法，选取哈佛大学公布的1977～1999年共15 993次地震的矩张量数据，估计了美国西部19个地区、中国和邻区43个地区(每个地区为1010范围)的平均环境剪应力值．结果表明，美国西部南加州西部海域和南加州应力最高，达13.7和12.0 MPa，然后向北、向南和向东逐渐递减，但最小也达8.7 MPa，是最高值的63%．中国新疆西北部地区和西藏察隅地区应力水平最高，达17.2和12.9 MPa，比美国高．中国的华北、云南、四川、台湾和美国南加州的应力水平差不多．中国南北地震带的应力水平为13 MPa左右，比南加州略高．两个重要地区的平均剪应力值分布图，提供了地学的基本数据．这些结果可为研究地震活动的大背景提供依据，对研究强地面运动参数(如峰值加速度及反应谱等)的衰减关系也是有用的．