一次春季罕见的降水天气过程分析

对吉林省2005年春季（4月19--22日）罕见的降水天气过程在大尺度环流形势、物理条件分析的基础上,重点对其逐时自动站风场资料进行分析,结果表明利用逐时自动站风场分析的中尺度切变对强降水落区、降水强度和强降水发生的时间都具有很好的指示意义;中尺度切变的形成也与地形条件有关。     

构造的挤压剪切作用对郑州矿区煤与瓦斯突出的控制

通过对郑州矿区煤与瓦斯突出矿井和历年突出事故分布特征统计分析,结果表明：NNE-NE向和NW-NNW向构造叠加及滑动构造的挤压剪切作用对郑州矿区煤与瓦斯突出的控制作用明显,该矿区以五指岭断层-樊寨断层一线为界,突出矿井和瓦斯矿井呈北西向分区分带性展布,大平、超化等突出矿井位于矿区南部构造复合地带,且突出点多分布在构造挤压剪切作用强烈区域。     

Bender Elements在测试土样剪切波速中的应用

本文以作者在香港理工大学土木与结构工程系设计制作的一套BenderElements为例,介绍了BenderElements的原理、发展历史、应用范围、使用方法和注意事项等。BenderElements是由压电陶瓷材料制成的,在拉伸、压缩作用下,会产生正、负电荷,反过来,给它施加正、负电荷后,它又可产生弯曲振动,正是利用它的这一特性,将其作成接收和发射装置,来测试土样的剪切波速Vs。BenderElements在安装使用时,防水和静电屏蔽十分关键。Vs可在场地地震反应、液化判别、动力基础设计、检测地基改良效果等方面获得应用。震相识别的原则是接收信号的第一个峰值为到时。     

内蒙古巴彦哈尔金矿床地质特征及成因初探

内蒙古巴彦哈尔金矿床位于华北陆块北缘艾力庙-锡林浩特中间地块西北缘.矿床赋存于中元古代温都尔庙群的绢云石英片岩和绿泥石片岩中.矿床的形成与区内韧性剪切带及华力西期岩浆活动关系密切.矿区内共圈定出5个矿体,总体走向为北西向,矿体呈似层状或透镜状产出,矿石类型包括石英脉型和糜棱蚀变岩型.金矿化与硅化和黄铁绢英岩化蚀变关系密切.结合矿床的矿体地质、矿物成分、矿物嵌布及围岩蚀变特征以及前人包裹体测温结果,认为矿床类型为浅成低温热液型金矿.     

Seismic traveltime inversion of 3D velocity model with triangulated interfaces

Seismic traveltime tomographic inversion has played an important role in detecting the internal structure of the solid earth. We use a set of blocks to approximate geologically complex media that cannot be well described by layered models or cells. The geological body is described as an aggregate of arbitrarily shaped blocks, which are separated by triangulated interfaces. We can describe the media as homogenous or heterogeneous in each block. We define the velocities at the given rectangle grid points for each block, and the heterogeneous velocities in each block can be calculated by a linear interpolation algorithm. The parameters of the velocity grid positions are independent of the model parameterization, which is advantageous in the joint inversion of the velocities and the node depths of an interface. We implement a segmentally iterative ray tracer to calculate traveltimes in the 3D heterogeneous block models. The damped least squares method is employed in seismic traveltime inversion, which includes the partial derivatives of traveltime with respect to the depths of nodes in the triangulated interfaces and velocities defined in rectangular grids. The numerical tests indicate that the node depths of a triangulated interface and homogeneous velocity distributions can be well inverted in a stratified model.     

节理峰值后归一化位移软化模型

切向荷载作用下贯通节理岩体峰值强度后的剪切应力、位移变形规律一般呈双曲线形式发展,即峰值后强度衰减速率逐步变小而趋于0,到达残余强度。直剪试验表明,非贯通节理岩体峰值后剪切应力、位移呈“S”型趋势发展,即强度衰减速率先是逐步增大,到达一定程度后逐步减少,最后趋于稳定达到残余强度值。贯通节理岩体峰值强度后的本构关系并不适合于描述该特征。提出一个新的非线性归一化位移软化本构模型,通过归一化剪切应力R与归一化剪切位移D的指数函数关系体现峰值后剪切应力、位移的发展趋势,即模型采用无量纲表达式。归一化剪切应力R是峰值后强度降? p-? 与峰值强度、残余强度差值? p-? r的比值;归一化位移D是峰值后剪切位移、峰值位移差值? -? p与残余位移、峰值位移差值? r -? p的比值。对含不同起伏角的非贯通节理岩体在常法向荷载条件下的直剪试验数据进行拟合分析,模型预测结果与实测值具有相当高的吻合度,验证了模型的正确性     

脱盐处理对钢样-砂浆界面微观结构的影响

运用扫描电镜(SEM)和X-射线衍射(XRD)技术研究了电化学脱盐处理对钢样-砂浆界面微观结构的影响。试验结果表明，经电化学脱盐处理后，钢样-砂浆界面的微观形貌特征与组成发生了明显的变化。     

Mechanical properties of calcareous silts in a hydraulic fill island-reef

Abstract

The mechanical characteristics of calcareous silt interlayers play an important role in the stability of island-reef foundations. Direct shear and consolidation tests were performed to study the relationship between the mechanical properties and the physical parameters of calcareous silt. Based on the consolidation test results and analysis of the settling examples, different calculation methods for soil settling were compared. The results show the following. (1) The relationship between the cohesion and water content of calcareous silt can be represented by an M-shaped curve. The water contents corresponding to the two peaks of the M-type curve increase with increasing dry density. (2) When the dry density is less than 1.33?g/cm³, increasing the density significantly improves the internal friction angle of calcareous silts. When the dry density of the calcareous silt is greater than 1.33?g/cm³, the internal friction angle is affected by both the dry density and the water content. (3) The shear strength decreases when the water content exceeds the optimum level. (4) The compressive modulus of calcareous silt is larger than that of terrigenous silt. Specifically, it decreases with decreasing dry density and increasing water content. (5) The stepwise loading method should be used to estimate the soil settling before fill engineering construction.     

Estimate of contribution of near-inertial waves to the velocity shear in the Bay of Bengal based on mooring observations from 2013 to 2014

Near-inertial motions contribute most of the velocity shear in the upper ocean. In the Bay of Bengal (BoB), the annual-mean energy flux from the wind to near-in...     

Comparison of vane shear and fall cone strengths of soft marine clay

A total of 1,014 measures of sediment shear strengths were measured by means of miniature vane shear and fall cone tests on five gravity cores collected in Eckernfo‐erde Bay, Baltic Sea. Paired t test was used to compare the shear strengths measured by the two methods. It was found that fall cone strength calculated with Wood's K₆₀value (0.29) overestimates the vane shear strength by 0.15 kPa (a = 0.001) and the sample mean of the fall cone strength is 4.1% higher than the mean of the vane shear strength. However, fall cone strength calculated with Hansbo's K₆₀ value (0.24) underestimates the vane shear strength by 0.88 kPa (a = 0.001), and the sample mean of the fall cone strength is 13.8% less than the mean of the vane shear strength. Both calculated fall cone strengths are significantly different from the vane shear strength, with a p value of less than 0.001. Regression analysis of the Echernfoerde Bay data indicates that a new K₆₀ value is 0.275 with a confidence interval (a = 0.01) from 0.2704 to 0.2786. Paired t test shows that there is no significant difference between miniature vane shear and fall cone tests for these samples if the fall cone strength is calculated with K₆₀ = 0.275.