1999年以来台湾及邻近海域7.5级以上强震前的条带现象

中国台湾地区地处欧亚板块与菲律宾海板块之间,地震活动频繁．本文报道了 我国台湾地区及其邻近海域1985～2002年间5．5级以上地震的条带内外频度比分 布,并着重研究了1999—2002年中发生的3次7．5级以上地震前的条带现象．其结 果表明:台湾地区近期发生的3次7．5级以上大地震前,5．5级以上地震呈条带分 布．这些条带符合条带内地震个数Nin≥6的条件,符合条带内、外频度比Nin／(Nin Nout)≥75％的条件,也符合条带长宽比大于5的要求,只是与板内地震条带相比,条 带的长度较短．     

一种具有巨大经济价值的海洋矿产资源--砂石土

砂石土指第四纪堆积的泥、土、砂，为一种极为重要的资源。我国具有丰富的海洋砂石土资源。以广东海域为例，通过资料的综合分析，探讨了海岸砂石土资源的重要作用，并提出其开采应注意的问题。     

利用归一化层速度预测和研究储层物性的方法

归一化层速度是对任意深度处的层速度进行归一化处理的一种速度形式，归一化处理的目的是把任意深度处的层速度转换为与深度无关的格式，归一化后层速度的横向变化主要取决于地层岩性，孔隙度等物性的变化，利用这一特点可以方便地利用已知钻井资料对其进行标定，比较简单地进行地层岩性，孔隙度等特性的预测。实际应用表明，其预测结果与钻井揭示吻合较好，预测效果令人满意。     

夏、冬两季长江口及邻近海域悬浮物的分布特征及其沉积量

利用2001年7～8月 ,2002年1月两个航次的悬浮物浓度资料 ,并参考其它水文参数 ,简要分析长江口及邻近海域悬浮物的分布特征 :无论夏季还是冬季 ,长江入海悬浮物总是向东南方输运 ;冬季由于再悬浮作用显著 ,悬浮物浓度明显高于夏季 ,且南北分布范围也明显增大 ,垂向分布均匀。同时采用数值模拟的海流流速值和观测的悬浮物浓度值计算悬浮物的断面通量 ,并最终得计算区悬浮物夏、冬两季的沉积量 ,夏、冬季长江口及邻近海域悬浮物的沉积量分别为0.79×108t,1.44×108t。     

晚中生代─新生代南海周缘地块运动与南海演化

报道了由华南几个盆地的古地磁数据综合而得的反映该区白垩纪以来古纬度变化曲线，结合Ｓｃｈｍｉｄｔｋｅ等（１９９０）发表的加里曼丹１５０Ｍａ以来的古地磁数据，表明华南与加里曼丹在４０Ｍａ前具有大致相同的古纬度变化史，差异仅出现在距今３０Ｍａ前后和１０Ｍａ以来。若此趋势可靠，则可作出下列推断：（１）南海的扩张只能发生在距今３０Ｍａ附近或１０Ｍａ以后华南与加里曼丹反向运动时期；距今３０Ｍａ的扩张已被广为接受；（２）华南与加里曼丹之向可能存在的古南海只能在９１Ｍａ之前存在；（３）南海演化可能存在两期扩张。南海的拟合可通过沿３５００ｍ等深线的先道时针旋转、后北向平移两个步骤完成。这与Ｈａｙａｓｈｉｄａ等（１９９１）提出的日本海张开与扩张模式很相似，提示东亚边缘海的形成和演化可能具有同样的机制。华南距今５０Ｍａ以来的古纬度变化与Ｔａｐｐｏｎｎｉｅｒ（１９８２）的传播挤出构造模式所预期的基本吻合，表明距今５０Ｍａ以来华南古纬度变化的运动学机制可用Ｔａｐｐｏｎｎｉｅｒ模式作解释。     

东太平洋多金属结核分布的二维趋势面分析

对规则网的 469个测站的多金属结核丰度和 93个测站的 Mn、 Cu、 Co、 Ni元素进行趋势面分析 ,经 F检验 ,各变量的变异性显著 ,拟合度较低 ,表明多金属结核丰度及 Mn、Cu、Co、Ni金属元素的控制因素比较复杂。趋势面分析结果与相关分析结果一致 ,Mn、Cu、Ni元素有极相似的趋势特征 ,有两个轴向分布 ,一个为东西向轴 ,高值区在东部 ,另一个为北西向轴 ,高值区在北西部 ;结核丰度与 Co也有极相似的趋势特征 ,高值区在西部。应用逐次趋势面分析的结果将结核丰度的地质特征分解成各种简单控制因素的叠加 ,使对多金属结核的控矿因素、分布规律和物质来源的研究方法多样化     

16米风化砂回填地基的深层振密加固

结合北方某重力式深水 ( -1 6.0 m)码头沉箱后壁 1 4.5 m范围的回填风化砂经深层振密处理这一工程实例 ,介绍了回填砂振密的技术要求、施工工艺和方法及振密效果的检测。同时对施工与检测中的某些技术问题提出了自己的看法。     

The Mid-atlantic Ridge (31°S–34°30′S): Temporal and spatial variations of accretionary processes

The ridge located between 31° S and 34°30′S is spreading at a rate of 35 mm yr⁻¹, a transitional velocity between the very slow (≤20 mm yr⁻¹) opening rates of the North Atlantic and Southwest Indian Oceans, and the intermediate rates (60 mm yr⁻¹) of the northern limb of the East Pacific Rise, and the Galapagos and Juan de Fuca Ridges. A synthesis of multi-narrow beam, magnetics and gravity data document that in this area the ridge represents a dynamically evolving system. Here the ridge is partitioned into an ensemble of six distinct segments of variable lengths (12 to 100 km) by two transform faults (first-order discontinuities) and three small offset (< 30 km) discontinuities (second-order discontinuities) that behave non-rigidly creating complex and heterogeneous morphotectonic patterns that are not parallel to flow lines. The offset magnitudes of both the first and second-order discontinuities change in response to differential asymmetric spreading. In addition, along the fossil trace of second-order discontinuities, the lengths of abyssal hills located to either side of a discordant zone are observed to lengthen and shorten creating a saw-toothed pattern. Although the spreading rate remains the same along the length of the ridge studied, the morphology of the spreading segments varies from a deep median valley with characteristics analogous to the rift segments of the North Atlantic to a gently rifted axial bulge that is indistinguishable from the shape and relief of the intermediate rate spreading centers of the East Pacific Rise (i.e., 21°N). Like other carefully surveyed ridge segments at slow and fast rates of accretion, the along-axis profiles of each ridge segment are distinctly convex upwards, and exhibit along-strike changes in relief of 500m to 1500 between the shallowest portion of the segment (approximate center) and the segment ends. Such spatial variations create marked along-axis changes in the morphology and relief of each segment. A relatively low mantle Bouguer anomaly is known to be associated with the ridge segment characterized by a gently rifted axial bulge and is interpreted to indicate the presence of focused mantle upwelling (Kuo and Forsyth, 1988). Moreover, the terrain at the ends of each segment are known to be highly magnetized compared to the centers of each segment (Carbotte et al, 1990). Taken together, these data clearly establish that these profound spatial variations in ridge segment properties between adjoining segments, and along and across each segment, indicate that the upper mantle processes responsible for the formation of this contrasting architecture are not solely related to passive upwelling of the asthenosphere beneath the ridge axis. Rather, there must be differences in the thermal and mechanical structure of the crust and upper mantle between and along the ridge segments to explain these spatial variations in axial topography, crustal structure and magnetization. These results are consistent with the results of investigations from other parts of the ridge and suggest that the emplacement of magma is highly focused along segments and positioned beneath the depth minimum of a given segment. The profound differences between segments indicate that the processes governing the behavior of upwelling mantle are decoupled and the variations in the patterns of axis flanking morphology and rate of accretion indicate that processes controlling upwelling and melt production vary markedly in time as well. At this spreading rate and in this area, the accretionary processes are clearly three-dimensional. In addition, the morphology of a ridge segment is not governed so much by opening rate as by the thermal structure of the mantle which underlies the segment.     

Analytic Solution of Interaction Between Surface Waves and Floating Elastic Plates with Elastic End-Restraints

Based on the dynamic theories of water waves and Mindlin plates,the analytic solution of interaction between surface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique.Firstly,without regard for elastic edge restraint,the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results.Therefore,it can be shown that the present method is valid.Secondly,three end-restraint cases(i.e.,the left-end elastic restraints,the both-end elastic restraints,and the right-end elastic restraints)are proposed to reduce the vibration of floating plates,in which the spring is used to connect the sea bottom and the floating plate's left(or right)edge.The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed.Moreover,the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.