Yixunite and Damiaoite—A Twin of New Native Alloys of Indium and Platinum from the Yanshan Mountains

Yixunite and damiaoite Were found in a cobalt- and copper-bearing platinum ore vein of a contact metasomatic deposit. The chief ore minerals are bornite, chalcopyrite, magnetite and carrollite. The platinum minerals include moncheite, sperrylite, daomanite, cobalt malanite and cooperite. Yixunite and damiaoite occur as immiscible globules, 1.0 to 2.0 mm in diameter. Yixunite is always in the central part of a globule. It is opaque with metallic lustre, bright white colour and black streak. HM = 5.8; VHN50 = 634 kg/mm2 (573-681 kg/ mm2); insoluble in HCl, HNO3, HF or H3PO4; no cleavage; no magnetism. Density is hard to measure because of small grain size. Calculated density = 18.21 g/cm3. Reflective colour is bright white with a yellowish tint. Isotropic. The mean analytical results (ranges) (%) are: Pt 82.8 (81.8-83.6), In 16.4(15.6-17.1) and total 99.2. The empirical formula (based on 4 atoms) is Pt2.993 In1.007 . The five strongest lines of X-ray diffraction (hkl, d,I) are 111, 2.30 (100); 200, 1.99 (     

Design and Strength Analysis of A Spherical Connector for Lifting Subsystem in Deep Sea Mining System

1 .IntroductionThe lifting systemis composed of pipes andtheir connectors .It is not onlythe lifting channel formanganese nodule betweenthe miningship andintermediate bin,but alsothe supporting massfor deepsea miningequipment and cables .Sothe reliability…     

节理非线性问题的约束函数法

接触非线性主要表现在其接触状态的突变而导致的非光滑性,这种非光滑性可以通过约束函数进行光滑逼近,进而可以用Newton法得到近似解,此方法称之为约束函数法。岩土工程中常用的Goodman单元就是一种类型的接触模型,但其参数的确定及计算的收敛性都存在着一定的困难。然而把约束函数应用到常规的Goodman单元中则可以解决上述困难,在详细地给出了其有限元法后,给出了处理刚体位移的一种简便方法。作为算例,给出了叠梁和三峡3# 坝段坝基稳定性的计算结果。     

基于半数值方法的限弯器剪弯刚度分析

柔性管缆限弯器存在接触非线性导致剪弯刚度分析困难。为此先基于悬臂梁方程建立剪弯刚度理论模型;然后构建考虑接触边界的锁合结构数值模型,得到其扭转刚度曲线;最后结合理论分析和数值计算求得考虑接触非线性的限弯器剪弯刚度曲线,并同传统的整体数值方法相比较,验证该半数值分析方法的有效性。对比发现基于半数值方法的限弯器剪弯计算效率远高于传统数值方法,其结果误差也满足工程需求;并且限弯器锁合结构处受接触边界影响有明显的非线性;限弯器子梁这一短梁结构基于Timoshenko梁理论计算的结果精度更高也更保守。相较于传统数值方法,该半数值方法用方程直接表达部分参数与剪弯刚度关系,并可以高效地分析限弯器剪弯刚度,使设计工作更加高效。     

Re‐establishment of soil water repellency after destruction by intense burning in a Mediterranean heathland (SW Spain)

Soil water repellency has been conventionally considered as a fire‐induced effect, but an increasing number of studies have suggested that natural background repellency occurs in many soil types, and many of them have suggested that water repellency can be re‐established over time after being destroyed. An experimental fire was conducted to study changes of the soil surface during the first 18 months following intense burning. The main objectives of this paper are as follows: (1) to investigate in situ water repellency changes at three soil depths (0, 2 and 4 cm) immediately after burning; (2) to evaluate the medium‐term evolution of water repellency under field conditions; and (3) to outline the main hydrological consequences of these changes. Also, different water repellency tests (water drop penetration time, ethanol percentage test (EPT) and contact angle (CA) between water drops and the soil surface) were carried out for comparison purposes. Field experiments showed that soil water repellency was partly destroyed after intense burning. Changes were relatively strong at the soil surface, but diminished progressively with depth. Levels of water repellency were practically re‐established 18 months after burning. This suggests that water repellency in the studied area is not necessarily a consequence of fire, but can instead be a natural attribute. Finally, although limited in time, destruction of soil water repellency has important consequences for runoff flow generation and soil loss rates, and, indirectly, for water quality. Copyright © 2009 John Wiley & Sons, Ltd.     

山东莱芜接触交代—热液铁矿矿体形态研究

在对莱芜接触交代铁矿地质特征研究中发现以往地质报告在矿体连接上存在混乱,使矿体形态失真。为便于今后矿体对比和成矿规律的认识,提出了矿体形态分类原则,并以三分法对矿体形态进行分类。指出矿体产状变化是矿体膨胀收缩、分支复合和尖灭再现的结果。根据矿体形态分类指出了找矿方向。不同的矿体形态反映不同的控矿构造,反映不同的矿体规模,反映不同的成矿岩体形态产状。单斜缓倾矿体的成矿岩体是岩床,控矿较小;陡倾矿体和背向斜矿体的成矿岩体是岩盖,控矿较大。     

A Discussion of Concavo-Convex Contacts between Oolites and Quartz Grains in Mixed Siliciclastic-Carbonate Rocks in Huanghua Basin, China

Concavo-convex contacrs between oolites and quartz grains are observed in mixed siliciclastic-carbonate rocks of the lower part of number 1 of Shahejie Formation, beach area, Dagang. Thin sections observation shows that oolite is convex in quartz grain, and oolite is complete. A possible explanation for it is pressure dissolution under alkaline fluid.     

与角岩有关的矿床主要类型及其对深部找矿的意义

作为热接触变质的产物,角岩在石墨、硅灰石、红柱石等变质成因非金属矿床和各种金属矿床以及油气矿藏均可见,但对其调查研究成果并不多。在文献综述的基础上,结合在南岭、冈底斯等重要成矿带地质找矿的实践,通过对与矿产资源有关的角岩广义概念的界定,概述了与角岩有关的各主要类型矿床的地质特征,如石墨、硅灰石、红柱石等变质成因非金属矿床,钨、钼、铁、铜、铀、金、铅锌、锡、银和稀有金属矿床以及油气矿藏;举例阐述了近年来角岩发育矿区深部找矿中的新突破,如江西淘锡坑钨矿,广西大厂铜坑至拉么一带的锡多金属矿床,西藏甲玛铜多金属矿,云南老厂银铅锌矿、羊拉铜矿、雪鸡坪铜矿等矿区;讨论了角岩型矿床成矿预测的准则。结果表明:矿区和矿田大比例尺深部预测时应注意岩石组合、干湿关系、封闭与开放体系、岩石物性和分带性、原岩岩性及其空间配置关系;区域性中、小比例尺成矿评价时应注意角岩的空间分布、岩石学特征与矿产资源的专属性关系等;利用角岩预测隐伏岩体的应用前景广泛,在深部找矿中具有现实意义。建议加强角岩与成矿关系的理论研究,对以往地质填图工作中发现的"角岩化带"可重新评价其与成矿的关系。     

Elastic behavior of weakly cemented contact

We investigate the elastic behavior of weakly cemented contact. We show that the radial distribution of stresses and the stiffnesses of a cemented contact are governed by the ratio a/RΛ, where R, a, and Λ are, respectively, the grain radius, the contact size, and the ratio of the elastic moduli of cement and grains. Moreover, we show that a cemented contact is always less stiff than a Hertzian contact having a similar size. Finally, we propose accurate approximate expressions of the contact stiffnesses. Copyright © 2014 John Wiley & Sons, Ltd.     

模拟摩擦接触问题的新型无网格数值方法

针对摩擦接触问题,给出一种新型的无网格数值方法。该方法基于单位分解思想,在标准无网格Galerkin法的位移模式中嵌入不连续函数和裂尖奇异函数,分别反映接触面的不连续性和接触面端点的奇异性;结合接触摩擦定律,继而构造出求解摩擦接触问题的无网格线性互补模型。在该方法中,接触面方程使用接触点对离散,全局离散系统方程则转化为标准的线性互补问题,可以很方便地使用Lemke算法求解。算例分析证明,本文方法的正确性和有效性。