APPLICATION OF SOME MECHANICAL CONCEPTS TO STRUCTURAL GEOLOGY

This paper discusses some mechanical concepts that have been largely applied to structural geology and tectonics, and addresses the problems and misunderstandings in use of these mechanical terms. The purpose is to stimulate the interests for structural geologists in using the mechanical principles and methods correctly to solve the geodynamic problems.     

The tectonic regime in Italy inferred from borehole breakout data

In Italy, the horizontal stress directions are well constrained in many regions, but the tectonic regime is not well known because the stress magnitudes are unknown. Our intention is to improve the knowledge of crustal stress in Italy, both at shallow depth and in low seismicity areas. Therefore, we inferred the tectonic regime from the comparison between the depth of breakout occurrence and the physical properties of the rocks in 20 boreholes. The critical value of the maximum horizontal stress, for which the effective tangential stress at the borehole wall overcomes the rock strength to form breakouts, could be computed from rock strength and density. Comparing the theoretical stress distributions for different tectonic regimes with the depth distribution of breakout occurrence, it is possible to infer the tectonic regime that fits best to the breakout depth distribution. We investigated boreholes up to 6 km deep located in different tectonic environments over the Italian peninsula: the Po Plain, the Apenninic chain, the Adriatic foredeep and the Tyrrhenian Quaternary volcanic region. These wells are characterised by breakout data of good quality (A, B and C, according to World Stress Map quality ranking system). The results are in general agreement with the style of faulting derived from earthquake focal mechanisms and other stress indicators. Our results show a predominance of a normal faulting (NF) regime in the inner Apennines and both normal faulting and strike–slip faulting (SS) style in the surrounding regions, possibly also associated with changes in the tectonic regime with depth.     

岩质边坡稳定性分析的探讨

通过最大剪应力等值线来确定边坡的滑动面,并与其结构面抗剪强度相比较,给出了确定边坡的稳定系数的方法。     

一次区域性大暴雨环境特征分析

通过对冀东南、鲁西北一次区域性大暴雨的分析表明：除有利的大尺度环流背景以外，超低空急流是大暴雨不稳定能量和水汽的主要输送者，高能区不稳定能量释放，产生大暴雨所需的强烈上升运动。暴雨落区与超低空急流前部最大风速切变区的位置密切相关。     

全球观测应力场的短波分量分析

世界应力图(WSM，World Stress Map)计划的应力指标，目前已累积数据共计10 920个，这些应力指标代表了该地区最大水平主应力的实际观测方向；与此同时，可以假定全球各个板块的绝对运动方向表征了相应各板块的最大水平主应力方向的长波分量．根据应力场的叠加原理，得到由该地区局部构造运动等因素贡献的短波分量的相对大小和方向．将全球划分成2.52.5的基本单元，对每个单元的WSM数据进行加权统计分析，得到其平均应力观测取向，利用HS2-NUVEL1全球绝对板块运动模型计算应力场的长波分量；平均观测应力取向和长波分量取向之间的夹角，决定了相应短波分量相对于观测应力场的大小及其取向的范围，并反映了特定研究地区局部应力场对总应力场的贡献程度．本文的计算结果表明，全球板块的绝大部分地区及各板块的平均效果，长波分量与短波分量对观测应力场的贡献程度相当．对于某些大陆板块内部，局部构造活动对观测应力场的贡献起到重要作用，因而控制着地震的孕育与发生．      

地震前地表重力场变化的一种可能解释——应力-损伤耦合效应

文中运用损伤力学研究方法 ,提出孕震过程中引起地壳破坏的应力 -损伤耦合效应。利用应变等效性假设 ,推导了地壳体的应力 -损伤耦合效应与地表重力变化之间的理论关系。根据岩石力学实验的不同加载途径 ,模拟了 1976年唐山 7 8级地震和 2 0 0 1年昆仑山口西 8 1级地震重力演化的不同特征 ,结果与实际情况符合较好 ,表明应力 -损伤耦合效应可以作为地震前地壳重力变化的一种物理解释     

地震视应力用于震后趋势快速判定的可能性

对多次强震的地震视应力进行了计算，将各次强震的地震视应力的高低与强震发生后的后续地震的强度进行联系，探索它们之间的关系，进而提出将地震视应力用于强震震后趋势预测的可能性。对多次强震的地震视应力与其后续地震强度的关系的分析结果表明，低视应力的强震的后续地震的强度一般较低，即低视应力的强震发生后，震区发生较强的后续地震的可能性较小。     

隧道GPS网对横向贯通误差的影响

本文在阐述隧道工程独立坐标系和隧道ＧＰＳ网数据处理方法的基础上推导出ＧＰＳ网对横向贯通误差影响的通用计算公式，分析了隧道ＧＰＳ网基准数据位置对横向贯通误差的影响。     

Analysis and study of the large earthquake risk in Yanqing-Huailai basin

ＡｎａｌｙｓｉｓａｎｄｓｔｕｄｙｏｆｔｈｅｌａｒｇｅｅａｒｔｈｑｕａｋｅｒｉｓｋｉｎＹａｎｑｉｎｇＨｕａｉｌａｉｂａｓｉｎＣＨＡＮＧＱＵＡＮＬＩＵ（刘昌铨）ＳＨＩＸＵＪＩＡ（嘉世旭）ＭＩＮＧＪＵＮＬＩＵ（刘明军）ＣＨＡＮＧＦＡＬＩ（李长发...     

云南地壳形变与丽江7.0级地震

本利用滇西、滇中地区大地垂直形变和跨断层短水准、短基线的监测资料进行综合分析论证，其结果表明：１９９６年２月滇西丽江７．０级地震前，该区应力场方向自１９９０年以来产生了由北东－北西的转变，震源区出现高达１０９ｍｍ的垂直差异运动１９９３－１９９６年有７５％的断层形变测点相继出现不同程度的中期、短期和临震异常。大地垂直形变与断层形变的共性演变特性，为强震的预测提供了一个较好的震例。