煤内生裂隙的成因

根据多年对煤层裂隙的几何形态、分布规律、性质、与煤层的组合关系等的研究，认为煤内生裂隙是在煤化作用过程中，由于脱水、脱挥发分、煤体积收缩作用产生或者是由于煤化作用生成的水、气体及温度升高，孔隙产生膨胀，形成异常高压产生的；裂隙的发育方向因受区域应力场的控制，区域上具有一致性，且走向与最大主应力方向一致；内生裂隙属于张性裂隙。     

Development of joints and shear fractures in the Kuqa depression and its implication to regional stress field switching

The superimposed basin must have undergone the changes of regional stress field. Study on the nature and switch of regional stress field of superimposed basin is very useful to understanding its stress state and tectonic events during its formation and evolution. As sensitive markers of small stress changes, joint and shear fracture, characterized by consistency of orientation over wide area, can be used to reconstruct paleostress state and its evolution. Detailed observations and analysis on the orientations, geometrical patterns, sequences of joints and shear fractures and their chronological relation to faults and folds show that, the NEE-SWW systematic joints and NNW-SSE systematic joints developed in the Mesozoic and Cenozoic strata are much more prominent than NW-SE systematic joints and shear fractures with different orientations. And the NWW-SEE and NW-SE systematic joints formed later than NEE-SWW systematic joints but earlier than shear fractures with different orientations. According to the relationships between joint and shear fractures and stress, the NEE-SWW systematic joints are inferred to result from lateral weak extension caused by the late Cretaceous regional uplift, while the NNW-SSE and NW-SE systematic joints are interpreted as syn-tectonic deformation relating to strong N-S compression in the Neogene. But some conjugate shear fractures occur probably due to sinistral strike-slip faulting in the Kuqa depression. At the beginning of the Neogene, the stress field changed and the maximal principal stress σ1 switched from vertical to horizontal.     

具有空间分布裂缝岩石的随机介质模型

利用随机过程的谱展开理论以及Hudson等人的裂纹介质模型构造一种裂纹数密度是空间平稳随机过程的随机介质模型。这个模型可以将裂纹的微观参数(裂纹数密度)与裂纹介质的宏观性质(弹性常数)联系起来,能灵活、有效地描述实际非均匀裂纹介质。模型算例表明,弹性常数的空问分布特征与裂纹数密度的有差别,而且对不同的弹性常数影响不同。通过改编自相关长度的大小,可以模拟裂缝在两个坐标轴方向上具有不同分布尺度的情况。最后,利用高阶的交错网格有限差分方法,我们模拟了地震波在具有随机分布裂缝岩石中的传播特征。     

碳酸盐岩储层缝洞发育带预测:以塔河油田为例

塔河油田碳酸盐岩为古岩溶喀斯特化与受后期构造叠置改造的孔、洞、缝等组成的非均质储层,储层具有规模不同、空间形态不规则、充填性质各异的复杂组合特征以此为对象通过分解地震波场不同特征信号,开发了一系列针对不同储层目标的叠前叠后地震预测技术,不同特征地震预测结果经综合叠置验证分析,实现了残丘体上叠置的孔、洞、缝及古地貌的精细刻画及表征,展示了缝洞空间纵横交错的叠置关系,提高了复杂储层空间展布规律的认识及精确定位。     

南泥湾油田工业油流标准参数确定及算法

针对南泥湾油田特点。确定适合本区地质及油藏工程特点的工业油流标准，提高该类油田储量的计算精度。应用数值模拟、类比等方法。结果显示．南泥湾这类必须经过压裂改造的特低渗油藏．单井产量仍然按照双曲线递减规律；工业油流标准的确定，需要准确把握单井平均总投资、原油利润、收回单井总投资的单井产量等参数，在此基础上确定的工业油流标准更能满足生产需要，对储量计算、滚动开发建产、管理者决策具有十分重要的意义。     

人工神经网络在岩体初始应力场反演中的应用

岩土工程问题的有限元分析一般需要考虑初始地应力场，而可供工程应用的初始应力值，主要靠少数实测资料。根据少数测点值，采用人工神经网络与有限元相结合的方法求解岩体初始应力场。通过算例说明：文中所提方法是合理的。     

河北兴隆洞子沟银-铜矿床地质特征及成因探讨

根据矿床地质特征、成矿温度、成矿时代及成矿物质来源等方面的研究，认为本矿床成矿流体来源于地慢岩浆水，并有海水混入。成矿物质主要来源于深部地壳和地慢，通过同生断裂喷气—喷流作用，在有利的地层和物理化学条件下沉淀成矿。矿床成因属于同生断裂喷流热液层控矿床。     

Methods for Setting up a Three-Dimensional Industrial Surveying System of “Building Blocks Type”

1　Methodsfororientatinginitialdirec tioninindustrialsurveyDifferentfromconventionalengineeringsurvey,thedistancebetweenthetwoangle measurementdevicesinindustrialsurveyisnomorethantenmeters.Theaccu racyforthemeasurementofobjectpointsisrequiredtobebetween± ( 0 .0 2～ 0 .0 5～ 0 .2 0 )mm ,sotheaccu racyfortheorientationoftheinitialdirectionoughttobehigh .Theexistingmethodsfororientatingtheinitialdirectionbetweenthetwoangle measurementdevicesincludemethodofusinginnertarget,collimatormethod,metho…     

青西油田碳酸盐岩裂缝性储层地球物理预测技术的应用

白云岩成岩收缩晶间孔、洞、缝与构造网状缝相互沟通可以组成良好的油气储层，但是这种复杂裂缝—孔隙型储层分布随机性强、发育程度和差异性大，储层预测难度大。本文以中国西部酒泉盆地青西油田下白垩统下沟组湖相白云岩裂缝—孔隙型储层为例，提出地球物理综合预测碳酸盐岩裂缝的方法。本文描述了综合地球物理方法预测碳酸盐岩裂缝储层的实施和应用效果。