Electron microscopy study of the sakhaite from endogenous borate deposit in Hunan, China

Sakhaite was first discovered by Ostrovskaya, Pertsev and Nikitina at Siberia in the former Soviet Union. By using the X-ray diffraction technique, they proved that the crystal system of sakhaite was cubic (a = 1.464 nm), its possible space groups were Fm3m, F432, F43m, Fm3, F23, and its crystal chemical for-mula was Ca48Mg16(CO3)16(BO3)28Cl4(OH)8 4H2O[1]. Chichagov, Simonov and Belov studied the crystal structure of synthetic sakhaite and determined that its space group was F4132, …     

南泥湾油田工业油流标准参数确定及算法

针对南泥湾油田特点。确定适合本区地质及油藏工程特点的工业油流标准，提高该类油田储量的计算精度。应用数值模拟、类比等方法。结果显示．南泥湾这类必须经过压裂改造的特低渗油藏．单井产量仍然按照双曲线递减规律；工业油流标准的确定，需要准确把握单井平均总投资、原油利润、收回单井总投资的单井产量等参数，在此基础上确定的工业油流标准更能满足生产需要，对储量计算、滚动开发建产、管理者决策具有十分重要的意义。     

人工神经网络在岩体初始应力场反演中的应用

岩土工程问题的有限元分析一般需要考虑初始地应力场，而可供工程应用的初始应力值，主要靠少数实测资料。根据少数测点值，采用人工神经网络与有限元相结合的方法求解岩体初始应力场。通过算例说明：文中所提方法是合理的。     

Methods for Setting up a Three-Dimensional Industrial Surveying System of “Building Blocks Type”

1　Methodsfororientatinginitialdirec tioninindustrialsurveyDifferentfromconventionalengineeringsurvey,thedistancebetweenthetwoangle measurementdevicesinindustrialsurveyisnomorethantenmeters.Theaccu racyforthemeasurementofobjectpointsisrequiredtobebetween± ( 0 .0 2～ 0 .0 5～ 0 .2 0 )mm ,sotheaccu racyfortheorientationoftheinitialdirectionoughttobehigh .Theexistingmethodsfororientatingtheinitialdirectionbetweenthetwoangle measurementdevicesincludemethodofusinginnertarget,collimatormethod,metho…     

Possible sources of forecast errors generated by the global/regional assimilation and prediction system for landfalling tropical cyclones. Part I: Initial uncertainties

This paper investigates the possible sources of errors associated with tropical cyclone (TC) tracks forecasted using the Global/Regional Assimilation and Prediction System (GRAPES). The GRAPES forecasts were made for 16 landfalling TCs in the western North Pacific basin during the 2008 and 2009 seasons, with a forecast length of 72 hours, and using the default initial conditions (“initials”, hereafter), which are from the NCEP-FNL dataset, as well as ECMWF initials. The forecasts are compared with ECMWF forecasts. The results show that in most TCs, the GRAPES forecasts are improved when using the ECMWF initials compared with the default initials. Compared with the ECMWF initials, the default initials produce lower intensity TCs and a lower intensity subtropical high, but a higher intensity South Asia high and monsoon trough, as well as a higher temperature but lower specific humidity at the TC center. Replacement of the geopotential height and wind fields with the ECMWF initials in and around the TC center at the initial time was found to be the most efficient way to improve the forecasts. In addition, TCs that showed the greatest improvement in forecast accuracy usually had the largest initial uncertainties in TC intensity and were usually in the intensifying phase. The results demonstrate the importance of the initial intensity for TC track forecasts made using GRAPES, and indicate the model is better in describing the intensifying phase than the decaying phase of TCs. Finally, the limit of the improvement indicates that the model error associated with GRAPES forecasts may be the main cause of poor forecasts of landfalling TCs. Thus, further examinations of the model errors are required.     

北京和广州地区云闪初始击穿电场变化特征

对比分析了北京和广州地区各100例云闪初始阶段前30 ms快电场变化波形上初始击穿脉冲的特征。依据脉冲的结构特征,两地区的云闪初始击穿脉冲可分为单极性单峰型、单极性多峰型、双极性单峰型和双极性多峰型脉冲,两地区均以单极性和单峰型脉冲为主。对脉冲参量特征的统计发现,脉冲的10%-90%上升时间、半峰值宽度地区差异性小于脉冲类型差异性;双极性单峰型脉冲的半峰值宽是单极性单峰型的1.2倍。不同类型脉冲过零时间的中值、平均值在10μs左右量级,且广州地区较北京地区的大;云闪初始击穿脉冲宽度平均值显著小于相同地区正地闪的,而脉冲间隔显著大于正地闪的。初始击穿脉冲最为集中的出现在云闪最初的1~2 ms,其比例随时间以显著的负指数分布下降。研究发现,双极性脉冲的过零时间与脉冲宽度之间、起始半周期峰值幅度与过冲幅度之间均存在较好的线性关系。     

梧州某安置小区滑坡分析与治理设计研究

文章从地层岩性、地质构造、水文地质条件等方面阐述该滑坡的基本特征,运用传递系数法对滑坡进行了稳定性分析与评价,为滑坡治理设计提供了依据。根据计算结果提出了采用削坡、预应力锚索+格构梁+锚杆挂网喷射混凝土防护,并结合生物防护及地表排水措施,具有较高的实践和理论意义。     

定点式声学多普勒流速仪的应用难点与误差分析

定点式声学多普勒流速仪(简称"HADCP")在国内已较为普及,但对其应用却多停留在表面,鲜有人研究其测验误差控制及参数优化方法,影响HADCP测流精度。为解决HADCP使用中的一些疑难问题,从流速仪测验误差表现的三方面对HADCP的测流误差开展讨论。以测验误差为控制指标,对HADCP在使用中各个环节的误差来源及应用难点进行分析,并以多个实例阐明提高仪器应用精度的优化设置方法。按照所论及方法进行对照检查并合理优化,可减小测流误差,提高HADCP测流方案的整体精度。     

LA-ICP-MS测定锡石U-Pb同位素年龄时两种普通铅扣除方法的原理及适用性比较

根据近年来激光烧蚀电感耦合等离子体质谱仪锡石微区原位U-Pb同位素定年的实验结果,结合相关资料,对实验过程中普通铅扣除的2种主要方法,即谐和图法和等时线法的原理、效果、优点和局限性进行了深入的比较。研究成果表明,2种主要方法各有不同的优点及局限性。在实际工作中,要想获得比较准确的测试结果,需要根据具体矿物样品的年龄范围、总的U和Pb含量、普通铅相对含量、测年精度要求等因素,灵活地选择普通铅扣除的方法。     

Failure Pressure Analysis of Corroded Moderate-to-High Strength Pipelines

Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods.