Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

台湾海峡1997年8月至1999年8月份海水光学衰减系数的分布特征

利用1997－1999年间8月份台湾海峡的实测资料，分析了海水光学衰减系数的垂直分布类型、水平分布特征。结果表明，台湾海峡海水光学衰减系数的垂直分布类型主要分为5种，大部分随深度而递增；光学衰减系数等值线基本与岸线平行，水平梯度自北向南、自近岸向外海递减，近岸等值线密集，而外海稀疏；影响台湾海峡光学衰减系数的主要因素是县浮物质（主要含浮游生物）和海流运动。     

风浪周期分布与谱宽度的关系

本文通过分析实验室风浪周期分布,发现风浪周期累积概率分布曲线低于Longuet-Higgins理论结果,在小概率周期区域实验结果与理论结果的差异明显。对实验结果进一步分析发现,在谱不是很窄时,在小概率处风浪周期累积概率随谱宽度的增大而降低,这与窄谱假定下的理论结果相反,Longuet-Higgins理论结果在小概率处不便于描述周期分布随谱宽度的变化。根据实验结果提出风浪周期的Weibull分布经验公式,Weibull分布中的参数依赖于谱宽度。     

沿空掘巷合理煤柱宽度综合分析与确定

在总结分析经验法、理论计算法、数值模拟法、现场实测等确定煤柱宽度方法优缺点的基础上,提出了采用现场实测和数值模拟相结合的方法来确定保留煤柱宽度。根据石炭井二矿生产实际,分别对巷道开挖前后,不同煤柱宽度下围岩应力、变形进行了模拟,同时利用21053工作面异型煤柱的有利条件,对不同煤柱宽度下巷道围岩变形、支护结构受力等进行了实测。经过对监测数据的分析,得出了巷道围岩变形、支护结构受力与煤柱宽度之间的关系,结合数值模拟结果,确定了石炭井二矿煤柱宽度。     

宁阳县蒋集镇彩山小流域水土保持技术研究

该文分析研究了彩山小流域的区域坡度和土壤特性,并根据区内土壤性质划分出4个小区域,即：自然坡度在20°～25°内为V1区,15°～20°内为V2区,10°～15°内为V3区,5°～10°内为V4区,分别反映了不同的土壤等级及土壤抗冲能力。同时,也研究出了一个系统化、理论化的科学依据i=V（10/3）/5B,并对所有砂石山区水土保持治理工作具有借鉴性和实用性。     

长沙某高边坡支护设计优化

结合长沙某高边坡支护工程实例，详细研究边坡岩土条件及环境条件，充分挖掘岩土参数潜力：≯耋翌睾；方綦建藉蓑术、经济对比分析，优选锚杆网格梁法进行边坡加固支护。实践表明，锚杆网格梁法是一种加固高边坡性价比很好的方法。     

国道108线广元段公路桥梁裂缝病害及加固对策

国道108线广元段由于地质地貌条件复杂、重载作用及施工质量未能保证，桥梁裂缝病害较为普遍。文章简要介绍了沿线工程地质条件，按裂缝病害的成因将其分为3种类型：即桥台填土上部不密实引起的裂缝病害、桥台填土整体不密实引起的裂缝病害及地基土不均匀引起的裂缝病害。分别提出3种加固对策：即压浆、预应力对穿锚索锚梁及高压旋喷技术对上述病害进行治理。通过工程实例证明了这3种措施的有效性，为公路桥梁类似裂缝灾害提供了实践经验。这3种治理措施的优点为工艺简单、成本较低。但是桥梁病害的治理往往为隐蔽工程，施工难度较大、检测困难。对于压浆和高压旋喷加固工程，必须进行取芯检测，而预应力对穿锚索锚梁在施工过程中必须严格控制水平孔的倾斜度，保证施工质量。     

降水预报的初始场最优化方法

利用一简单的湿度发展方程，尝试用非线性最优化方法讨论降水预报中的最优初值场的获得。试验结果表明，通过非线性最优化分析方法，可以找到一最优初始场，使得模式预报结果与实际观测场一致，这为将来在实际应用中如何改善更复杂模式的初始场，提高预报准确率提供了一个很有意义的思路。     

Effects of laser beam alignment tolerance on lidar accuracy

One of the major lidar error sources not yet analyzed in the literature is the tolerance of the laser beam alignment with respect to the scanning mirror. In this paper, the problem of quantifying these errors is solved for rotating polygon mirror type lidar systems. An arbitrary deviation of the beam from its design direction–the vector of beam misalignment–can be described by two independent parameters. We choose these as horizontal and vertical components of the misalignment vector in the body frame. Either component affects both, horizontal and vertical lidar accuracy. Horizontal lidar errors appear as scan line distortions—along and across track shifts, rotations and scaling. It is shown that the horizontal component of misalignment results in a scan line first being shifted across the track and then rotated around the vertical at the new center of the scan line. Resulting vertical lidar error, being a linear function of the scan angle, is similar to that produced by a roll bias. The vertical component of the beam misalignment causes scan line scaling and an along track shift. The corresponding vertical error is quadratic with respect to the scan angle. The magnitude of these effects is significant even at tight alignment tolerances and cannot be realistically accounted for in the conventional calibration model, which includes only range, attitude and GPS biases. Therefore, in order to attain better accuracy, this model must be expanded to include the beam misalignment parameters as well. Addition of new parameters into the model raises a question of whether they can be reliably solved for. To give a positive answer to this question, a calibration method must utilize not only ground control information, which is typically very limited, but also the relative accuracy information from the overlapping flight lines.     

滑坡治理中格构锚固结构的解析解分析

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中