LA-ICP-MS测定锡石U-Pb同位素年龄时两种普通铅扣除方法的原理及适用性比较

根据近年来激光烧蚀电感耦合等离子体质谱仪锡石微区原位U-Pb同位素定年的实验结果,结合相关资料,对实验过程中普通铅扣除的2种主要方法,即谐和图法和等时线法的原理、效果、优点和局限性进行了深入的比较。研究成果表明,2种主要方法各有不同的优点及局限性。在实际工作中,要想获得比较准确的测试结果,需要根据具体矿物样品的年龄范围、总的U和Pb含量、普通铅相对含量、测年精度要求等因素,灵活地选择普通铅扣除的方法。     

水平分层胶结充填体损伤本构模型及强度准则

以矿山分层充填为背景,针对水平分层充填体,提出了初始分层损伤、荷载损伤与总损伤的概念;利用损伤力学理论,考虑分层效应,建立了充填体损伤演化及本构模型;基于全微分方法构建了考虑分层效应的充填体强度准则。开展了不同分层充填体力学特性试验。研究结果表明：所建立的分层充填体损伤本构模型及强度准则理论曲线与试验曲线高度吻合,验证了模型的正确性;初始分层损伤随分层数增多,呈现 的二次多项式递增,分层效应与荷载耦合作用劣化了充填体总损伤;充填体总损伤率呈先增大后减小趋势。在峰值之前,分层数越多,则总损伤率越大;而峰值之后,分层数越多,则总损伤率越小,且总损伤率最大值随分层数增多而增大。     

浅埋软弱地层隧道旋喷预衬砌支护技术的研究

论述了浅埋软弱地层隧道旋喷预衬砌支护的研究背景及国内外研究现状、室内试验、旋喷器具、施工工艺及应用情况,并与其它施工方法进行了对比,效益显著。     

初始主应力方向对钙质砂动力特性影响的试验研究

利用大连理工大学的土工静力-动力液压三轴-扭转动多能剪切仪对相对密度为30 %的钙质砂进行了扭转和竖向循环耦合试验,探讨了初始主应力方向角 对钙质砂动强度和残余应变发展的影响。试验结果表明： 对钙质砂的动强度、残余应变发展的影响非常明显,随着 的增大,钙质砂的动强度显著减小,而残余应变的发展速度则明显加快。     

初期支护对软岩隧道围岩稳定性和位移影响分析

软弱岩体隧道开挖后,围岩变形具有异常显著的流变性。基于Poyting-Thomoson模型,对隧道围岩位移进行了粘弹性解析分析,根据所得出的解析解,结合渝（重庆）沙（长沙）高速公路石龙隧道位移监控量测实践,对初期支护后隧道围岩变形特征量进行了分析对比,结果表明,理论曲线能较好地反映围岩实际位移变化特征。最后通过将支护前后围岩受力状态与单轴和三轴应力状态岩石蠕变进行类比,得知初期支护在一定程度上减小了围岩的最终变形量,可以有效地抑制隧道围岩的变形速率。其结果为确定合理的二次支护时机提供了理论依据,对同类隧道的施工支护具有很好的指导意义和较高的参考价值。     

东天山康古尔金矿床成矿流体地球化学特征及其来源

新疆康古尔金矿床是分布于晚古生代火山岩区受脆韧性剪切带控制的蚀变岩型金矿。该矿床成矿流体具有中低温度（３２０～１００℃）、中等ＮａＣｌ质量分数（１１４％～１７０％）、弱还原等特征。包裹体气相成分以Ｈ２Ｏ和ＣＯ２为主,液相成分中富Ｎａ＋、Ｃｌ－,而贫Ｋ＋、Ｆ－。成矿流体δＤ为－４５‰～－６６‰,δ１８Ｏ为－８３４‰～２９８‰,（８７Ｓｒ／８６Ｓｒ）ｉ值为０７０７７～０７１０６,反映了成矿流体由变质水、大气降水和岩浆水混合组成的特点     

测量地应力的新方法

论述了用赤平投影学方法分析确定地应力的主方向，用Kaiser效应测量地应力大小。将两者有机结合起来可以克服Kaiser效应测量地应力时，主应力方向难以确定的最大缺点。通过和传统现场地应力测量方法比较，表明该法具有更为简单，更为经济，准确度高等优点，便于大量测量，以寻求工程地区地应力变化规律。     

Analysis on variation characteristics of geothermal response in Liaoning Province

Due to energy shortage and increasing environmental awareness, resources in shallow underground space have been rapidly exploited and utilized. So that studying variation characteristics of geothermal response in gneiss is necessary for effective and rational use of underground heat. Based on field test of thermal response in gneiss under hydrogeological survey project carried out in shallow geothermal energy development zone in Liaoning Province, this thesis analyzes mathematical statistics of geothermal response characteristics in main gneiss of Laoning Province. The initial formation temperature ranges from 10.80℃ to 15.80℃ according to field test. The statistical results show that in the condition of natural water content, the average thermal conductivity of Quaternary loose rocks comes as clay silty silty fine sand medium sand coarse sand gravelly sand. This order is consistent with thermal conductivity characteristics of gneiss obtained in the laboratory. Formation temperature recovery in different strata follows as granite medium sand clay. This order is opposite to the absolute value of temperature recovery curve slope of corresponding lithology, which shows that the stratum with higher temperature recovery rate has lower temperature recovery curve slope.     

循环荷载下人工结构性土变形与强度特性试验研究

针对长期动载作用下天然沉积结构性黏土地基强度和刚度循环软化问题,分别以水泥和食糖为模拟粒间胶结和大孔隙的材料,制备了不同胶结强度和初始孔隙比的人工结构性土,开展了人工结构性土与相应重塑土的动三轴试验,分析了土体胶结强度、初始孔隙比、围压和动应力幅值对累积变形和动强度的影响规律。试验结果表明：累积应变-振动次数曲线以临界循环应力为界分为：塑性安定型、临界型和破坏型;临界循环应力随胶结强度增大、初始孔隙比减小而增大;土体胶结强度越高,脆性破坏越明显,累积应变曲线转折点对应的应变越小。动强度的应变破坏标准采用转折点应变值更符合土性变化规律;动强度随胶结强度增大、初始孔隙比减小而增大;动黏聚力cd随破坏振次增大而降低,而动内摩擦角?d基本不变。试验结果可为软弱土地基动力灾变控制提供有益参考。     

Accelerated initial stiffness schemes for elastoplasticity

Iterative methods for the solution of non‐linear finite element equations are generally based on variants of the Newton–Raphson method. When they are stable, full Newton–Raphson schemes usually converge rapidly but may be expensive for some types of problems (for example, when the tangent stiffness matrix is unsymmetric). Initial stiffness schemes, on the other hand, are extremely robust but may require large numbers of iterations for cases where the plastic zone is extensive. In most geomechanics applications it is generally preferable to use a tangent stiffness scheme, but there are situations in which initial stiffness schemes are very useful. These situations include problems where a nonassociated flow rule is used or where the zone of plastic yielding is highly localized. This paper surveys the performance of several single‐parameter techniques for accelerating the convergence of the initial stiffness scheme. Some simple but effective modifications to these procedures are also proposed. In particular, a modified version of Thomas' acceleration scheme is developed which has a good rate of convergence. Previously published results on the performance of various acceleration algorithms for initial stiffness iteration are rare and have been restricted to relatively simple yield criteria and simple problems. In this study, detailed numerical results are presented for the expansion of a thick cylinder, the collapse of a rigid strip footing, and the failure of a vertical cut. These analyses use the Mohr–Coulomb and Tresca yield criteria which are popular in soil mechanics. Copyright © 2000 John Wiley & Sons, Ltd.