Preliminary seismic anisotropy in the upper crust of the south segment of Xiaojiang faults and its tectonic implications

The Xiaojiang faults,striking north-to-south(NS),and the Honghe faults,striking north-to-west(NW),are first-order block boundaries that intersect to form a concentrated stress zone at an acute angle in the southern part of the Sichuan-Yunnan rhombic block(SYB).It is also a crucial zone for material escaping from the Tibetan Plateau(TP)due to the collision between the Indian Plate and the Eurasian Plate.In December 2017,the Institute of Earthquake Forecasting of the China Earthquake Administration(CEA)deployed a linear temporary seismic broadband array,the Honghe-Xiaojiang temporary Seismic Array(HX Array),across first-order block boundaries in the southern SYB.By using the waveform data of small earthquakes recorded by stations in the HX Array across Xiaojiang faults from 2017 to 2019,and by permanent seismic stations of the China National Earthquake Networks from 2012 to 2019,this paper adopts the systematic analysis method of shear-wave splitting(SWS),SAM method,to obtain preliminary results for seismic anisotropy in the upper crust.The study area can be divided into two subzones according to the spatial distribution of the directions of polarization of the fast shear-wave(PFS)at the stations:the northern zone(zone A,where the HX Array is located)and the southern zone(zone B,to the south of the HX Array).The results show that the directions of the PFS at stations in zone A were highly consistent,dominant in the NE direction,correlated with the in-situ principal compressive stress,and were seemingly unaffected by the Xiaojiang faults.The directions of the PFS as recorded at stations in zone B were more complicated,and were dominant in the NS direction parallel to that of the regional principal compressive stress.This suggests the joint influence of complex tectonics and regional stress in this narrow wedge area.By referring to the azimuthal anisotropy derived from seismic ambient noise in the southeast margin of the TP,the NS direction of the PFS in the middle and lower crust,and its EW direction in the upper mantle,this paper concludes that azimuthal anisotropy in the upper crust differed from that in the lower crust in the south segment of Xiaojiang faults,at least beneath the observation area,and azimuthal anisotropy in the crust was different from that in the upper mantle.The results support the pattern of deformation of ductile flow in the lower crust,and the decoupling between the upper and lower crusts as well as that between the crust and the mantle in the study area.The crustal directions of the PFS appeared to be independent of the Xiaojiang faults,suggesting that the influence of the South China block on the SYB passed through the Xiaojiang faults to the Yimen region.The results of this study indicate that anisotropic studies based on data on the dense temporary seismic array can yield clearer tectonic information,and reveal the complex spatial distribution of stress and deformation in the upper crust of the south segment of Xiaojiang faults.     

藏南拉康温泉地质特征及雄曲河谷两岸地热分布不均成因分析

西藏山南地区洛扎县雄曲河拉康段在600 m距离内出露温泉4处,仅1处位于河谷右岸;平硐勘查显示两岸岩性、产状、构造一致,地热异常却仅在左岸平硐内部显著,右岸平硐地热异常不明显.本次研究以此异常为出发点,通过片麻状花岗岩不同切面导热实验、片麻状花岗岩与板岩相同切面导热实验,温泉水δ2H,δ18O同位素测试分析等方法,探究...     

黄海、东海海区水体散射特性研究

半分析模型是水色遥感反演算法的研究热点,而水体后向散射系数对建立半分析水色反演模型是非常重要的参数.通过对黄海、东海海区的水体固有光学量测量数据进行分析,得到水体总后向散射系数与水体总散射系数的关系为乘幂关系,颗粒物后向散射系数随光谱变化的指数在高低浑浊度水体有很大差异,并初步得到黄海、东海海区水体的后向散射系数与总悬浮物浓度的关系,从而为水色半分析模型建立和水光学辐射计算提供一组散射特性模型.     

甘南高原乡村社会固有脆弱性及其影响因素

开展社会固有脆弱性研究不仅有助于了解区域社会系统的可持续发展状态,更有助于寻求提高社会系统适应能力的恰当策略。通过构建乡村社会固有脆弱性分析框架和评价指标体系,并以甘南高原为研究区,在分析乡村社会固有脆弱性特征的基础上识别了其关键影响因子。结果表明：① 甘南高原乡村社会固有脆弱性呈“梭型”分异,其中,高、中、低脆弱性乡镇分别占18.95%、47.37%、33.68%。② 社会固有脆弱性存在明显的区域差异性,从农区-半农半牧区-牧区、高山峡谷区-山地丘陵区-山原区,社会固有脆弱性趋于增加;同时,随着少数民族聚居度降低、经济发展水平升高,社会固有脆弱性趋于降低。③ 社会固有脆弱性在空间上呈“北高南低”的不均衡分布,敏感性呈“中间高四周低”的集聚分布,适应能力呈相对均衡的“碎片化”分布。④ 气温、生育结构、民族结构、住房安全性、社会弱势群体比重、经济条件、信息可得性和参保比例是影响社会固有脆弱性的关键因子。最后,提出相应的对策建议。     

Cavity expansion in cross‐anisotropic rock

Schistous rock can be considered—in a first approximation—as cross‐anisotropic linear elastic material. The determination of the corresponding material constants on the basis of the laboratory investigation of rock samples often fails, as the extraction of appropriate cores proves to be unfeasible (the cores disintegrate if the schistosity is pronounced). In this paper a new method is presented to determine the material constants of a linear elastic cross‐anisotropic rock on the basis of cavity expansion field tests, e.g. with a radial jack. To this purpose, an analytic approximation for the deformation of a hydrostatically loaded cylindrical cavity in cross‐anisotropic rock is derived which serves to the inverse analysis of the material parameters. Copyright © 2010 John Wiley & Sons, Ltd.     

Description of deformation process in inherently anisotropic granular materials

The main focus in this work is on modeling of mechanical response of granular materials that display inherent anisotropy. Both the experimental and numerical investigations are described. First, the results of direct shear as well as drained/undrained triaxial tests that involve crushed limestone with elongated angular‐shaped particles are reviewed. Afterward, a mathematical framework is presented for modeling of elastic/ inelastic deformation that incorporates the multi‐laminate approach. The deformation is monitored on a set of randomly oriented planes, and the formulation incorporates the thickness of the shear band that is associated with sliding/separation process. A systematic procedure for identification of material functions/ parameters is outlined that is based on the results of direct shear tests, and the framework is later applied to simulate the behavior under triaxial conditions. The results of numerical simulations are compared with the experimental data. Copyright © 2011 John Wiley & Sons, Ltd.     

Crustal complexity in the Lachlan Orogen revealed from teleseismic receiver functions

There is an ongoing debate about the tectonic evolution of southeast Australia, particularly about the causes and nature of its accretion to a much older Precambrian core to the west. Seismic imaging of the crust can provide useful clues to address this issue. Seismic tomography imaging is a powerful tool often employed to map elastic properties of the Earth's lithosphere, but in most cases does not constrain well the depth of discontinuities such as the Mohorovi?i? (Moho). In this study, an alternative imaging technique known as receiver function (RF) has been employed for seismic stations near Canberra in the Lachlan Orogen to investigate: (i) the shear-wave-velocity profile in the crust and uppermost mantle, (ii) variations in the Moho depth beneath the Lachlan Orogen, and (iii) the nature of the transition between the crust and mantle. A number of styles of RF analyses were conducted: H-K stacking to obtain the best compressional–shear velocity (V _P /V _S) ratio and crustal thickness; nonlinear inversion for the shear-wave-velocity structure and inversion of the observed variations in RFs with back-azimuth to investigate potential dipping of the crustal layers and anisotropy. The thick crust (up to 48 km) and the mostly intermediate nature of the crust?mantle transition in the Lachlan Orogen could be due to the presence of underplating at the base of the crust, and possibly to the existing thick piles of Ordovician mafic rocks present in the mid and lower crust. Results from numerical modelling of RFs at three seismic stations (CAN, CNB and YNG) suggest that the observed variations with back-azimuth could be related to a complex structure beneath these stations with the likelihood of both a dipping Moho and crustal anisotropy. Our analysis reveals crustal thickening to the west beneath CAN station which could be due to slab convergence. The crustal thickening may also be related to the broad Macquarie volcanic arc, which is rooted to the Moho. The crustal anisotropy may arise from a strong N–S structural trend in the eastern Lachlan Orogen and to the preferred crystallographic orientation of seismically anisotropic minerals in the lower and middle crust related to the paleo-Pacific plate convergence.     

Anisotropy of magnetic susceptibility parameters: Guidelines for their rational selection

Twenty-eight parameters used to characterize measurements of the anisotropy of magnetic susceptibility are compared theoretically in this work by introducing the concept of the field of susceptibility tensors, which allows the representation of parameters as families of lines in a plane. It is demonstrated that the foliation and lineation parameters are but a special case of the shape parameters, implying that the resolution of these two rock fabric elements using AMS measurements alone is more an artifact of the numerical range of definition of some parameters than a quantification of two physically independent features. Also, it is shown that parameters presumably of the same type do not necessarily yield equivalent interpretation of results in a qualitative sense, and therefore, caution should be strongly exercised when parameters are to be selected. Paramters quantifying the degree of anisotropy are, in general, equivalent to each other because of the very small departure observed in natural rocks from the isotropic case. However, a final consideration of the possible ability to differentiate rock types and a convenient range of values allowing expression of the degree of anisotropy in a well-defined percentage are pointed out as the main factors to be considered before selecting one parameter within this class.     

Calculated and observed seismic behaviour of exposed upper mantle

In order to determine the seismic properties of rocks representing the continental crust/upper mantle transition, a structural and petrographical study of peridotites of the Ivrea-Verbano zone (N. Italy) has been undertaken. The seismic behaviour (Vp, Vs, birefringence, orientation of the fast shear-wave polarisation plane) has been calculated from the modal composition of rock samples, together with the crystallographic preferred orientation and the single crystal elastic constants, using the methods of Mainprice (1990). It is shown that the intrinsic anisotropy of peridotites is mainly due to the lattice preferred orientation (LPO) of olivine and to the competing effects due to the LPO of orthopyroxene. If present, well-oriented hydrous phases such as phlogopite, leads to both P- and S-waves velocities becoming drastically reduced, but the anisotropy and the S-wave splitting (mainly on the foliation plane) is increased. An attempt has been made to apply this petrologic and microstructural approach to understand the seismic properties of ultramafic rocks with the aid of a mobile seismic network set up in the Ivrea-Verbano zone. Five recording units with 3-component geophones were installed on the most representative lithologies of the Ivrea-Verbano zone: kinzigites, gabbros, stronalites, and on metapelites of the adjacent outcrop of the Serie dei Laghi. During five months the seismic network recorded 49 events that were mainly regional earthquakes. The preliminary analysis of the first arrival revealed a high-velocity anomaly near the Finero ultramafic massif. Rough calculations indicated that this anomaly could be due to a shallow-depth, peridotitic body about six kilometres thick. S-wave polarisation analysis was carried out on the horizontal components of the seismograms of four regional earthquakes that showed a first arrival propagating almost vertically at the recording sites. Four earthquakes were chosen in order to reconstruct the orientation of the polarisation plane of the shear phases. The preliminary results of this analysis have shown a qualitatively good agreement between the orientation of the polarisation plane of the fast shear-wave and the strike of the foliation at the station near Finero, located on kinzigites of the Ivrea-Verbano zone, although the relationships between the local structural setting and the polarisation orientations at the other recording sites is not yet so clear.