Study on comparison between absolute and relative input energy spectra and effects of ductility factor

Introduction Estimation of an attenuation relationship for strong ground motion parameters has been an interesting research subject in the field of engineering seismology and has played a very important role in seismic safety evaluation, seismic zoning, seismic hazard evaluation of major constructions, etc. At present, the generally used parameters include peak acceleration, peak velocity and elastic response spectrum. Such parameters mentioned above are essentially independent of the duration…     

Study of statistically correcting model CMAQ-MOS for forecasting regional air quality

Based on analysis of the air pollution observational data at 8 observation sites in Beijing including outer suburbs during the period from September 2004 to March 2005, this paper reveals synchronal and in-phase characteristics in the spatial and temporal variation of air pollutants on a city-proper scale at deferent sites; describes seasonal differences of the pollutant emission influence between the heating and non-heating periods, also significantly local differences of the pollutant emission influence between the urban district and outer suburbs, i.e. the spatial and temporal distribution of air pollutant is closely related with that of the pollutant emission intensity. This study shows that due to complexity of the spatial and temporal distribution of pollution emission sources, the new generation Community Multi-scale Air Quality (CMAQ) model developed by the EPA of USA produced forecasts, as other models did, with a systematic error of significantly lower than observations, albeit the model has better capability than previous models had in predicting the spatial distribution and variation tendency of multi-sort pollutants. The reason might be that the CMAQ adopts average amount of pollutant emission inventory, so that the model is difficult to objectively and finely describe the distribution and variation of pollution emission sources intensity on different spatial and temporal scales in the areas, in which the pollution is to be forecast. In order to correct the systematic prediction error resulting from the average pollutant emission inventory in CMAQ, this study proposes a new way of combining dynamics and statistics and establishes a statistically correcting model CMAQ-MOS for forecasts of regional air quality by utilizing the relationship of CMAQ outputs with corresponding observations, and tests the forecast capability. The investigation of experiments presents that CMAQ-MOS reduces the systematic errors of CMAQ because of the uncertainty of pollution emission inventory and improves the forecast level of air quality. Also this work employed a way of combining point and area forecasting, i.e. taking the products of CMAQ for a center site to forecast air pollution for other sites in vicinity with the scheme of model products "reanalysis" and average over the "area".     

Chemical forms of heavy metal contaminants in sediments of Miyun reservoir

The chemical forms, spatial distribution and sources of As, Hg, Cd, Pb and Zn in sediments of the Miyun reservoir were studied. The results of sequential extraction demonstrate that most of As, Pb and Zn were bound to the residual fraction, Hg was associated with the sulfide fraction while Cd was associated with the carbonate fraction and the residual fraction. On the vertical profiles the concentrations of the heavy metals in total and each fractions mostly decreased with increasing depths in sediments, suggesting that the heavy metals input from the upstream watershed increases yearly. Summation of the residual fraction, the sulfide fraction and the carbonate fraction accounts for 60.03%―85.60% of the total heavy metal contents in the sediments, which represent the geochemical background values of the elements and relate closely to soil erosion. Results of the main factor analysis show that most sediments of the reservoir come from the upstream soil erosion, the point source pollution and domestic waste. Moreover, the microbial activities taking place on the sediment-water interface are also one of the major factors to cause the increasing content of the organic matter fraction and the iron-manganese oxide fraction. Environmental change of the reservoir water could make the removability of the heavy metals increase, leading to the increase of their concentrations in pore water in sediments, and imperiling water quality of the reservoir.     

Assessment of regional air pollution distribution by point cumulative semivariogram method at Erzurum urban center, TURKEY

In the assessment of air quality, regional distribution and dispersion with distance are important, together with the variations of pollutants in time. On this occasion, the point cumulative semi-variogram (PCSV) method is used in order to find simply regional distribution of pollutants of Erzurum urban centre. This method is based simply on the summation of square differences in air pollutant concentrations between different sites. Monthly regional variation maps of Erzurum are constructed by finding radius of influence (for SO₂, from 1000 m to 3500 m and, for TSP, 1000–2000 m) and PCSV scattering diagram data at different levels by using monthly average sulphur dioxide (SO₂) and total suspended particulate (TSP) matter concentrations in 2001–2002 winter season. Consequently, the air pollution distribution of Erzurum is assessed.     

Knowledge Representation Methods in Expert System for Earthquake Prediction ESEP 3.0

INTRODUCTIONKnowledgerepresentationandknowledgeacquisitionarekeyissuesinbuildinganexpertsystem .Theyarecloselyrelatedtothedomainproblem solvinglevelandcompetenceoftheexpertsystem .Intheknowledgeacquisitionprocess,thedomainexpertwillfirstofferandorganizepr…     

The Quantitative Identification of Regional Mine and Natural Earthquakes and Its Application

INTRODUCTIONThe structural mine earthquake in coal mines refers to the quake induced by excavationengineeringthatleadstorupturingor change of geological structure and weakness surfaceintheinteriorof rock mass.According to the origin,mine earthquakes can b…     

库水位变化对库岸边坡稳定性的影响

在假定坡体孔隙水水位为水平线且不考虑渗透作用影响的基础上,基于极限平衡法考察了水位上升及下降的快慢对边坡安全系数的影响。对比计算表明:在水位缓慢变化即坡体内外水位线等高的条件下,边坡的安全系数随着水位坡高比的增大先略减小后急剧增大,且在水位坡高比为0.3处取得最小值,在边坡完全淹没于水中时取得最大值。当边坡完全淹没于水中后,水位高于坡顶的多少对边坡安全系数没有影响;在水位骤降或陡升条件下,相同库水位对应的边坡安全系数基本上均小于水位缓慢变化情况下的安全系数,故工程实际中无论是排水还是蓄水,都应尽量保持水位缓慢变化,这样才能使边坡处于较安全的状态。     

Transport rate of calcareous sand in unidirectional flow

This paper examines the transport of calcareous sand in unidirectional flow and its prediction through existing sediment transport models. A flume experiment of four sand samples collected on Oahu, Hawaii, provides 29 sets of sediment transport data in the bed-form and suspended transport stages. The measured transport data are compared with direct predictions from four energy-based transport models developed for siliceous particles. Corrections for the grain-size, fall velocity, and critical velocity of calcareous sand based on recent research are applied to the models and the results are compared with the direct calculations and measured data. The comparison illustrates the important role particle shape plays in the transport of calcareous sand. All four sediment transport models give consistent predictions and good agreement with the majority of the measured data. Two of the models respond positively to the corrections in both the bed-form and suspended transport stages indicating that such an approach may provide an interim solution for the transport of calcareous sand.     

浅析福建地倾斜潮汐因子γ及其组合动态特征

本文计算了福建自1992年至2004年以来的地倾斜EW和NS两分量的固体潮潮汐因子,并进行动态组合,绘制组合动态三种特征量:ΔγEW ΔγNS(表征扩容)、ΔγEW-ΔγNS(表征剪切应变)、ΔγEW/ΔγNS(表征介质各向异性)的时序曲线图,并进行固体潮特征分析,寻找中、强地震发生前远场块体和近场块体地倾斜突变性形变异常与之对应关系。结果表明:在福建沿海,海潮是决定倾斜固体潮特征的主要因素;福建发生5级上的中强地震、台湾发生7级以上强烈地震时,福建地倾斜固体潮潮汐因子及其动态组合特征存在明显的渐进式突变性形变异常现象,异常量和异常持续时间与震级和震中距有较好的对应关系。     

Fracture mechanics analysis of multiple cracks in anisotropic media

This paper presents a single‐domain boundary element method (BEM) for linear elastic fracture mechanics analysis in the two‐dimensional anisotropic material. In this formulation, the displacement integral equation is collocated on the un‐cracked boundary only, and the traction integral equation is collocated on one side of the crack surface only. A special crack‐tip element was introduced to capture exactly the crack‐tip behavior. A computer program with the FORTRAN language has been developed to effectively calculate the stress intensity factors of an anisotropic material. This BEM program has been verified having a good accuracy with the previous researches. Furthermore, by analyzing the different anisotropic degree cracks in a finite plate, we found that the stress intensity factors of crack tips had apparent influence by the geometry forms of cracks and media with different anisotropic degrees. Copyright © 2010 John Wiley & Sons, Ltd.