Hydro-thermal performance of multilayer capillary barriers in arid lands

In this study, a capillary barrier system was designed and tested for an arid land environment. To simulate arid land conditions of high temperature and sub-irrigation systems, the barrier was subjected to thermal and hydraulic gradients in opposite directions; to test the barrier system under these severe conditions, an experimental apparatus was designed and fabricated. The multilayer capillary barrier consisted of three layers made of silica sand, a mixture of sand and bentonite in equal portions, and a mixture of clay (25%) and aggregate (75%). Several one dimensional coupled heat and moisture tests were performed. Temperature variations along the thickness of the barrier were recorded as a function of time, and at the end of each test, the barrier was sliced into small sections, for the determination of volumetric water content as a function of distance from the heat source. The experimental results were discussed in view of the barrier's intended purpose of its ability to store moisture for long time durations. Coupled heat and moisture flow equations were developed and solved numerically via a finite difference method. Diffusivity parameters were calculated by using experimental results, a numerical model, and Powell's conjugate directions method of nonlinear optimization. The model was calibrated and the results were discussed. Good agreement between calculated and experimental results was obtained. This revised version was published online in July 2006 with corrections to the Cover Date.     

Simulations of a coupled hydro-chemo-mechanical system in rocks

A coupled hydro-chemo-mechanical numerical model is developed for these coupled phenomena in many engineering fields. The model has been applied to predicting the response of a stressed rockmass column to an injected reactive fluid (reagent) flow. The response includes evolutions of porosity, permeability, reagent and mineral concentrations during dissolution. In the model, the progress of dissolution is defined by the change in porosity ratio and the porosity increases with dissolution assuming there is no precipitation. The numerical evolutions of porosity, permeability, reagent and mineral concentrations during dissolution are validated against steady state solutions. The model results show that these evolutions are regulated to a certain extent by the applied external loadings: an applied extensional stress enhances the progress of the dissolution process while an applied compression stress slows the progress of the dissolution process. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.     

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.     

Elastic lateral dynamic impedance functions for a rigid cylindrical shell type foundation

Elastic lateral dynamic impedance functions are defined as the ratio of the lateral dynamic force/moment to the corresponding lateral displacement/rotation at the top ending of a foundation at very small strains. Elastic lateral dynamic impedance functions have a defining influence on the natural frequencies of offshore wind turbines supported on cylindrical shell type foundations, such as suction caissons, bucket foundations, and monopiles. This paper considers the coupled horizontal and rocking vibration of a cylindrical shell type foundation embedded in a fully saturated poroelastic seabed in contact with a seawater half‐space. The formulation of the coupled seawater–shell–seabed vibration problem is simplified by treating the shell as a rigid one. The rigid shell vibration problem is approached by the integral equation method using ring‐load Green's functions for a layered seawater‐seabed half‐space. By considering the boundary conditions at the shell–soil interface, the shell vibration problem is reduced to Fredholm integral equations. Through an analysis of the corresponding Cauchy singular equations, the intrinsic singular characteristics of the problem are rendered explicit. With the singularities incorporated into the solution representation, an effective numerical method involving Gauss–Chebyshev method is developed for the governing Fredholm equations. Selected numerical results for the dynamic contact load distributions, displacements of the shell, and lateral dynamic impedance functions are examined for different shell length–radius ratio, poroelastic materials, and frequencies of excitation. Copyright © 2016 John Wiley & Sons, Ltd.     

ROCKS & MINERALS DETERMINATION AND ANALYSIS

正20140786Deng Zhenping(Institute of Karst Geology,Chinese Academy of Geological Sciences,Guilin 541004,China);Yang Wen-qiong Application of Stripping Voltammetry with a Solid Amalgam Electrode for Determination of Copper in a Tracer and Groundwater Tracing Experiment(Rock and Mineral Analy-     

Modelling landslides in unsaturated slopes subjected to rainfall infiltration using material point method

This paper presents a dynamic fully coupled formulation for saturated and unsaturated soils that undergo large deformations based on material point method. Governing equations are applied to porous material while considering it as a continuum in which the pores of the solid skeleton are filled with water and air. The accuracy of the developed method is tested with available experimental and numerical results. The developed method has been applied to investigate the failure and post‐failure behaviour of rapid landslides in unsaturated slopes subjected to rainfall infiltration using two different bedrock geometries that lie below the top soil. The models show different failure and post‐failure mechanisms depending on the bedrock geometry and highlight the negative effects of continuous rain infiltrations. Copyright © 2016 John Wiley & Sons, Ltd.     

Sources of anthropogenic fire ignitions on the peat-swamp landscape in Kalimantan,Indonesia

Fire disturbance in many tropical forests, including peat swamps, has become more frequent and extensive in recent decades. These fires compromise a variety of ecosystem services, among which mitigating global climate change through carbon storage is particularly important for peat swamps. Indonesia holds the largest amount of tropical peat carbon globally, and mean annual CO₂ emissions from decomposition of deforested and drained peatlands and associated fires in Southeast Asia have been estimated at ∼2000 Mt y-1. A key component to understanding and therefore managing fire in the region is identifying the land use/land cover classes associated with fire ignitions. We assess the oft-asserted claim that escaped fires from oil palm concessions and smallholder farms near settlements are the primary sources of fire in a peat-swamp forest area in Central Kalimantan, Indonesia, equivalent to around a third of Kalimantan's total peat area. We use the MODIS Active Fire product from 2000 to 2010 to evaluate the fire origin and spread on the land use/land cover classes of legal, industrial oil palm concessions (the only type of legal concession in the study area), non-forest, and forest, as well as in relation to settlement proximity. We find that most fires (68–71%) originate in non-forest, compared to oil palm concessions (17%–19%), and relatively few (6–9%) are within 5 km of settlements. Moreover, most fires started within oil palm concessions and in close proximity to settlements stay within those boundaries (90% and 88%, respectively), and fires that do escape constitute only a small proportion of all fires on the landscape (2% and 1%, respectively). Similarly, a small proportion of fire detections in forest originate from oil palm concessions (2%) and within close proximity to settlements (2%). However, fire ignition density in oil palm (0.055 ignitions km⁻²) is comparable to that in non-forest (0.060 km-2 ignitions km-²), which is approximately ten times that in forest (0.006 ignitions km⁻²). Ignition density within 5 km of settlements is the highest at 0.125 ignitions km⁻². Furthermore, increased anthropogenic activity in close proximity to oil palm concessions and settlements produces a detectable pattern of fire activity. The number of ignitions decreases exponentially with distance from concessions; the number of ignitions initially increases with distance from settlements, and, around from 7.2 km, then decreases with distance from settlements. These results refute the claim that most fires originate in oil palm concessions, and that fires escaping from oil palm concessions and settlements constitute a major proportion of fires in this study region. However, there is a potential for these land use types to contribute substantially to the fire landscape if their area expands. Effective fire management in this area should therefore target not just oil palm concessions, but also non-forested, degraded areas where ignitions and fires escaping into forest are most likely to occur.     

不同地形条件地面同步光谱定标场对比研究

利用美国ASD公司的FieldSpec Pro FR地面波谱仪,选择5°视场角探头和135cm探头距测试地物高度,开展0°、5°、10°、15°、20°等五种不同地形坡度明、暗地物自然定标场地面波谱测试。通过对比研究不同地形坡度具代表性、能真实反映被测试目标平均自然性的各波谱测试点波谱曲线特征,得出0°、5°地形坡度获取的波谱曲线连续、平滑,信噪比高,没有混入大气水气吸收、仪器噪声等因素导致的剧烈波动、跳跃现象或尖锐锯齿状噪声,波谱特征明显,吸收峰最小值位置清晰可辨,各波谱测试点波谱曲线变化幅度小,整体反射率值变化小,Fe~(2+)、Fe~(3+)、Al-OH、Mg-OH、CO_3~(2-)等分子基团与离子波谱的诊断性波谱特征位置清晰可辨。因此0°和5°坡度地形条件获取的地面同步自然场光谱定标波谱曲线,可以满足航空高光谱遥感数据的大气校正、光谱重建和空、地回归分析等所需的地面波谱数据要求。     

电感耦合等离子体质谱法(ICP-MS)测定水系沉积物中的铌钽锆铪

建立电感耦合等离子体质谱法(ICP-MS)测定水系沉积物中铌、钽、锆、铪四种元素的分析方法。将样品与氢氧化钠、过氧化钠混合物放入高温炉中,熔融分解完全,用热水提取,过滤后弃去滤液,将滤纸及沉淀用酒石酸-盐酸溶液溶解,稀释至刻度测定。方法检出限(3s)为:LD(Nb)=0.08μg/g,LD(Ta)=0.04μg/g,LD(Zr)=0.5μg/g,LD(Hf)=0.04μg/g,精密度(RSD%,n=6)为:0.84%~4.21%。该测定方法具有灵敏度高、精密度好、分析速度快、线性范围宽、操作性强等优势。采用该方法对国家一级标准物质进行测定表明,其结果与标准值吻合。此方法已在实际地质调查样品分析中得到应用。