The application of hyperspectral remote sensing to coast environment investigation

Requirements for monitoring the coastal zone environment are first summarized. Then the application of hyperspectral remote sensing to coast environment investigation is introduced, such as the classification of coast beaches and bottom matter, target recognition, mine detection, oil spill identification and ocean color remote sensing. Finally, what is needed to follow on in application of hyperspectral remote sensing to coast environment is recommended.     

Quantifying the storm erosion hazard for coastal planning

The quantity of coastline retreat resulting from storm erosion is one of the most important phenomena that needs to be accurately quantified to facilitate effective coastal management strategies. Historically, the volume of storm erosion (and coastline retreat) accommodated for coastal planning decisions has been directly linked to the storm (usually defined by considering wave height and duration only) with a certain pre-defined return period, known as a Synthetic Design Storm (SDS) (e.g. 1 in 100 year storm). The SDS method of estimating storm erosion volumes for coastal planning thus assumes that, for example, the 1 in 100 year storm event also results in a 1 in 100 year erosion event. This communication discusses the physical reality of this assumption and demonstrates the improved performance of a new method, based on Joint Probability Distributions (JPD) for estimating storm erosion volumes proposed by Callaghan et al. [Callaghan, D.P., Nielsen, P., Short, A.D. and Ranasinghe, R., 2008. Statistical simulation of wave climate and extreme beach erosion. Coastal Engineering, 55(5): 375–390] using one of the world's longest beach profile surveys from Sydney, Australia.     

Numerical Prediction of Induced Pressure and Lift of the Planing Surfaces

This paper discusses the numerical prediction of the induced pressure and lift of the planing surfaces in a steady motion based on the potential flow solver as well as the spray drag by use of the practical method.The numerical method for computation of the induced pressure and lift is potential-based boundary element method.Special technique is identified to present upwash geometry and to determine the spray drag.Numerical results of a planing flat plate and planing craft model 4666 are presented.It is shown that the method is robust and efficient and the results agree well with the experimental measurements with various Froude humors.     

Geometry and architectural associations of co-genetic debrite–turbidite beds in basin-margin strata, Carboniferous Ross Sandstone (Ireland): Applications to reservoirs located on the margins of structurally confined submarine fans

Co-genetic debrite–turbidite beds are most commonly found in distal basin-plain settings and basin margins. This study documents the geometry, architectural association and paleogeographic occurrence of co-genetic debrite–turbidite beds in the Carboniferous Ross Sandstone with the goal of reducing uncertainty in the interpretation of subsurface data in similarly shaped basins where oil and gas is produced.The Ross Sandstone of western Ireland was deposited in a structurally confined submarine basin. Two outcrops contain co-genetic debrite–turbidite beds: Ballybunnion and Inishcorker. Both of the exposures contain strata deposited on the margin of the basin. An integrated dataset was used to characterize the stratigraphy of the Ballybunnion exposure. The exposure is divided into lower, middle, and upper units. The lower unit contains laminated shale with phosphate nodules, structureless siltstone, convolute bedding/slumps, locally contorted shale, and siltstone turbidites. The middle unit contains co-genetic debrite–turbidite beds, siltstone turbidites, and structureless siltstone. Each co-genetic debrite–turbidite bed contains evidence that fluid turbulence and matrix strength operated alternately and possibly simultaneously during deposition by a single sediment-gravity-flow event. The upper unit contains thin-bedded sandy turbidites, amalgamated sandy turbidites, siltstone turbidites, structureless siltstone, and laminated shale. A similar vertical facies pattern is found at Inishcorker.Co-genetic debrite–turbidite beds are only found at the basin-margin. We interpret these distinct beds to have originated as sand-rich, fully turbulent flows that eroded muddy strata on the slope as well as interbedded sandstone and mudstone in axial positions of the basin floor forming channels and associated megaflute erosional surfaces. This erosion caused the axially dispersing flows to laterally evolve to silt- and clay-rich flows suspended by both fluid turbulence and matrix strength due to a relative increase in clay proportions and associated turbulence suppression. The flows were efficient enough to bypass the basin center/floor, physically disconnecting their deposits from coeval lobes, resulting in deposition of co-genetic debrite–turbidite beds on the basin margin. The record of these bypassing flows in axial positions of the basin is erosional surfaces draped by thin siltstone beds with organic debris.A detailed cross-section through the Ross Sandstone reveals a wedge of low net-to-gross, poor reservoir-quality strata that physically separates sandy, basin-floor strata from the basin margin. The wedge of strata is referred to as the transition zone. The transition zone is composed of co-genetic debrite–turbidite beds, structureless siltstone, slumps, locally contorted shale, and laminated shale. Using data from the Ross Sandstone, two equations are defined that predict the size and shape of the transition zone. The equations use three variables (thickness of basin-margin strata, thickness of coeval strata on the basin floor, and angle of the basin margin) to solve for width (w) and trajectory of the basinward side of the low net-to-gross wedge (β). Beta is not a time line, but a facies boundary that separates sandy basin floor strata from silty basin-margin strata. The transition zone is interpreted to exist on lateral and distal margins of the structurally confined basin.Seismic examples from Gulf of Mexico minibasins reveal a wedge of low continuity, low amplitude seismic facies adjacent to the basin margin. Strata in this wedge are interpreted as transition-zone sediments, similar to those in the Ross Sandstone. Besides defining the size and shape of the transition zone, the variables “w” and “β” define two important drilling parameters. The variable “w” corresponds to the minimum distance a well bore should be positioned from the lateral basin margin to intersect sandy strata, and “β” corresponds to the deviation (from horizontal) of the well bore to follow the interface between sandy and low net-to-gross strata. Calculations reveal that “w” and “β” are related to the relative amount of draping, condensed strata on the margin and the angle of the basin margin. Basins with shallowly dipping margins and relatively high proportions of draping, clay-rich strata have wider transition zones compared to basins with steeply dipping margins with little draping strata. These concepts can reduce uncertainty when interpreting subsurface data in other structurally confined basins including those in Gulf of Mexico, offshore West Africa, and Brunei.     

天然气水合物的上界面——硫酸盐还原-甲烷厌氧氧化界面

定义了海域天然气水合物成矿带的上界面。指出在地球深部存在最原始的、从根本上不依靠光合作用来生存的生命系统。根据对ODP岩心样品中微生物数量的统计,海底以下沉积层中的生物数量可能占据全球原核生物总量的70%,其生物总碳量和地球表面所有植物的碳总量相当。地球内部如此巨大的生物总量应该在地壳中的气体分布等方面起着重要作用。甲烷在地壳层中广泛存在,并主要是微生物成因的。微生物产甲烷的途径主要有两个,一是二氧化碳还原,另一个是醋酸盐发酵。相应地,参与产甲烷的微生物菌群主要是产甲烷菌和食醋酸菌。甲烷在沉积层中的厌氧氧化是一个不争的事实。该过程发生在海底以下一个非常局限的区带,称为硫酸盐还原-甲烷厌氧氧化区带。通常,这个区带很窄,仅为一个面,因此,硫酸盐还原-甲烷厌氧氧化区带又称硫酸盐还原-甲烷厌氧氧化界面。这是一个基本的生物地球化学界面,在功能上它起到屏蔽甲烷向海底和大气逸散的作用,是一个巨大的甲烷汇。甲烷的厌氧氧化同样是一个由微生物介导的过程,参与此过程的微生物主要是食甲烷古菌和硫酸盐还原菌。硫酸盐还原-甲烷厌氧氧化界面在海洋沉积层中一般深可达海底以下上百米,浅可至海底。此界面为天然气水合物的上界面,该界面以上没有甲烷...     

利用卫星云图资料制作热带气旋预报路径的一种算法

根据台风生成后在云场中移动的环境条件,引入一个环境作用于台风中心的热力梯度力方向,用该热力梯度力方向与当前台风的移动方向相结合,研究台风移动过程的变化规律,寻找一种简易可行的台风路径预报方法．经过多年实践,本文揭示出台风中心未来沿着当前移动方向与环境作用于台风中心的热力方向合成移动的基本规律：当前台风中心移向与前方晴空区中轴线相交时,台风沿着当前移向前进到与阻挡轴线相交点相距4个纬距的位置时便发生偏转,逐渐与阻挡轴线走向趋于一致;若当前台风中心距相交点的距离小于或等于4个纬距时,则从当前位置发生偏转．文中利用以上规律研制出台风移向变化方程和移动轨迹方程．     

南海东北部陆缘区新近纪早期反转构造特征及其动力学意义

通过深入分析"九七三"项目所获取的高分辨率多道地震剖面,结合区域钻井资料,探讨了新生代以来南海东北部陆缘所历经的新生代早期张裂、中新世晚期阶段性挤压及上新世以来的稳定热沉降等复杂构造运动;张裂背景下的南海东北部陆缘在中新统中部、下部出现的背斜、逆断层等典型压性反转构造,凸现了南海东北部陆缘在晚中新世发生的阶段性挤压构造运动;分析表明,此构造活动是东沙运动在台西南海域的表现,其动力来源同菲律宾海板块的北西向运动有关。     

典型农牧交错区LUCC及农牧交替演化过程分析——以内蒙古赤峰市为例

以内蒙古赤峰市为例,利用TM影像解译得到的三期土地利用数据(1988、1995、2000年)研究20世纪80年代以来,典型农牧交错区的LUCC演化过程,主要采用土地利用开发度、耗减度、信息熵、空间转移矩阵等方法分析了不同阶段农牧交替演化的时空特征。结果表明:(1)草地、耕地、林地为研究区主要的土地利用方式,整个研究时段内,耕地开垦和草地减少是主导LUCC过程。耕地开垦面积达2424.12km²,草地减少1959.65km²。从前后两个时期来看,前期(1988-1995年)耕地和草地变化更为剧烈,耕地以增为主,草地以减为主;后期(1995-2000年)草地转出速度放缓,但耕地开垦速度仍相对较快,林地转出速度加快;(2)土地流转过程以农牧交替演化为主,前期草地与耕地的交替转化剧烈,草地开垦面积达到2 040.50km²,耕地撂荒还草634.75km²,耕地开垦主要集中在敖汉旗的北部;后期LUCC过程放缓,草地转耕地面积为828.50km²,主要发生在敖汉旗以及林西县北部地区等区域,伴随着一定程度的弃耕;(3)三个时期土地利用结构信息熵分别为1.290、1.301、1.304,赤峰市土地利用系统有序程度在降低。农牧交错演化过程的分析,为研究该地区人类-环境耦合系统的变化和机制提供了重要依据。     

��Ӷ��Ѵ������ֽ�������ЧӦ

????????????????????????β??????????????1985??2006??β?????仯??????????1???????????????????????????????????????????????????????????????????????????2????????????????????????????????1?λ??????????￡??????????ε?????????????????????1?γ????????仯?????3?? ????????????????仯?????????????????仯????????????????????????????     

����������쳣�ĵ���Ӱ�����

????????????????????????????????????????????????SymletС?????????о?????????????????????????????????????, ???????????4???5??????????????????????????????????????2???3????????????????????????????????????????????ε????????????????ο???