带隅撑胶合木梁-双肢柱框架结构节点抗震性能试验研究

针对胶合木梁-柱节点抗弯能力弱的问题,提出了一种带隅撑的胶合木梁-双肢柱框架结构节点,以提高节点的转动刚度,改善梁柱结构框架的抗侧性能.对3组6个足尺胶合木梁-双肢柱框架结构节点进行了单调和低周反复加载试验以研究节点的抗震性能.结果表明:无隅撑节点类似于铰接,抗弯承载力很小,增设隅撑后显著提高了节点的转动刚度和抗弯承载...     

Shaking table tests of steel frame with superelastic Cu–Al–Mn SMA tension braces

Shaking table tests are performed on a one‐bay one‐story steel frame with superelastic Cu–Al–Mn shape memory alloy (SMA) tension braces. The frame is subjected to a series of scaled ground motions recorded during the 1995 Kobe earthquake, Japan. The test results demonstrate that the SMA braces are effective to prevent residual deformations and pinching. It is also shown that the time history responses observed from the shaking table tests agree well with the numerical predictions using a rate‐independent piecewise‐linear constitutive model calibrated to the quasi‐static component tests of the SMA braces. This suggests that the loading rate dependence of Cu–Al–Mn SMAs as well as the modeling error due to the piecewise linear approximation can be neglected in capturing the global response of the steel frame. Numerical simulations under a suite of near‐fault ground motion records are further performed using the calibrated analytical models to demonstrate the effectiveness of the SMA braces when the variability of near‐fault ground motions is taken into account. A stopper, or a deformation restraining device, is also proposed to prevent premature fracture of SMA bars in unexpectedly large ground motions while keeping the self‐centering capability in moderate to large ground motions. The effectiveness of the stopper is also demonstrated in the quasi‐static component and shaking table tests. Copyright © 2015 John Wiley & Sons, Ltd.     

夯管锤非开挖技术在尾矿坝仰斜式排水孔工程中的应用

根据甘肃省玛曲县格尔珂金矿尾矿坝体土石碾压部位的地质基本特征和排水孔工程施工技术要求,经过技术经济论证,优选了尾矿坝仰斜式排水孔施工方案。将夯管锤非开挖技术成功应用于仰斜式排水孔工程施工中,取得了较好的效果,为同类工程施工积累了经验。     

垂直和倾斜断层围陷波的谱元法数值模拟及其波场特征对比

Fault zone trapped waves( F ZTWs) m ainly travel along the fractured fault zone( F Z)which is of low velocity and high attenuation. FZTWs often carry significant information about a fault  s internal structure,so it is important to understand their wave field characteristics for FZ structure inversion. Most previous simulations are based on vertical faults,while in this paper we implement the FZTW simulations on vertical or inclined faults and compare their wave fields in both time and frequency domains. The results show that the existence of fault zone and inclined angle of fault can significantly influence the features of waves near faults. In amplitude,a fault zone can generate a larger amplitude of waves. The velocity contrast between two walls of fault may lead to amplification of amplitudes in the low velocity fault wall. In frequency,a fault zone tends to influence the waves in the low frequency range. In a pattern of particle polarization of FZTWs,it tends to be single direction for vertical faults but fork to multiple directions for inclined faults,which might provide a new way to study the fault zone with FZTWs. These conclusions may be valuable for FZ structure inversion,and will enhance the knowledge on near-fault strong ground motions.     

Dynamic response and optimization of an inclined steel rock shed by the graded energy dissipating method

Blocking rockfalls directly by reinforced concrete(RC) flat sheds with thick sand cushions is an outdated method. Such conventional sheds typically accumulate rock heavily, and become progressively damaged and are difficult to repair, and are very costly. To address these problems, we propose a new structure called a Graded Dissipating Inclined Steel Rock(GDISR) shed that utilizes the graded energy dissipation method. Here, we study the dynamic response of the GDISR shed with model test and numerical simulation, and give its optimization design combining with a practical engineering case. Our results show that the optimized modular E-block and corrugated steel tube can deform to sufficiently absorb the energy of different impact intensities. This efficiently and economically provides GDISR sheds with two security lines. Compared with conventional RC sheds, GDISR sheds with optimal incline have a more efficient anti-impact function, are faster and easier to repair, and are much simpler and cheaper to build.     

地震波斜入射情形下水平成层半空间自由场的时域计算

在应用有限元模拟地震工程中的波动散射问题时,为了计算边界节点的运动和实现波动能量的输入,必须首先确定边界节点的内行波场即背景水平成层半空间的自由场。利用显式有限差分法的内节点位移计算公式和基于水平成层介质波动传播特点建立的相邻节点间自由场运动的关系式,给出了计算水平成层半空间自由场的时城方程(以入射侧边界节点为例)。本方法是显式有限元意义上的数值精确解,可应用于近场波动数值模拟中内行波场与散射波场的时城同步模拟。     

大跨度张弦梁结构的地震响应分析

本文分析了预张力的大小、撑杆的数目、地震的行波效应和结构约束条件对大跨度张弦梁结构地震响应的影响。结果表明：结构的初始地震响应随着索内预张力的增大而增大,然后逐渐趋于接近,与预张力大小无关;撑杆的数目和位置对结构的地震响应影响很小;与地震波的一致输入相比,考虑行波效应的索应力响应峰值增大62．9％,竖向位移响应峰值增大36．2％;张弦梁结构的地震响应对支座约束条件很敏感,约束条件改变,地震响应改变很大。     

Parameter identification for on‐line model updating in hybrid simulations using a gradient‐based method

To improve the efficiency of model fitting, parameter identification techniques have been actively investigated. Recently, the applications of parameter identification migrated from off‐line model fitting to on‐line model updating. The objective of this study is to develop a gradient‐based method for model updating to advance hybrid simulation also called hybrid test. A novel modification of the proposed method, which can reduce the number of design variables to improve the identification efficiency, is illustrated in detail. To investigate the model updating, simulated hybrid tests were conducted with a 5‐story steel frame equipped with buckling‐restrained braces (BRBs) utilized in the shaking table tests conducted in E‐Defense in Japan in 2009. The calibrated analytical model that was verified with the test results can serve as the reference model. In the simulated hybrid tests, the physical BRB substructure is numerically simulated by utilizing a truss element with the 2‐surface model identical to the part of the reference model. Such numerical verification allows simulation of measurement errors for investigation on the performance of the proposed method. Moreover, the feasibility of sharing the identified parameter values, which were obtained from the physical substructure responses, with the relevant numerical models is also verified with the artificial component responses derived from the physical experiments.     

管道穿越黄土陡坡斜井工程稳定性分析

长输油气管道工程频遇黄土冲沟,给管线的施工和安全运营带来了困难。基于邓肯-张非线性弹性本构模型,利用数值模拟方法,对斜井开挖法穿越边坡的井周及坡体的受力变形规律进行了系统的研究和分析。结果表明,在确保斜井布设在边坡潜在的最危险滑动面以外的前提下,坡顶斜井入口越接近坡肩,斜井井周及坡体的稳定性越好。鉴于黄土斜井拱顶易出现塌落的问题,基于多工况数值模拟分析结果,结合响应面方法,构建了拱顶屈服区深度的预测公式,经验证相关性良好,可用于对斜井穿越黄土冲沟或陡坡的支护设计。     

耗能减震技术在抗震加固工程中的简化设计

介绍了阻尼器型屈曲约束支撑和阻尼器型屈曲约束钢板墙这两种耗能减震技术的简化设计方法,并通过这种简化设计方法使阻尼器型屈曲约束支撑这种耗能减震技术在抗震加固工程中的得到了应用,从案例分析结果看,这种耗能减震技术简化设计方法为结构抗震设计提供了可靠、便利的设计依据,是一种合理有效的抗震途径或结构振动控制技术手段,可应用于抗震加固工程的设计理论和分析。