砂岩型铀矿地浸过程中的溶质迁移机理

讨论了“溶质迁移、溶质迁移面和特征性溶质迁移面”的概念，以及研究溶质迁移的方法和实例。在对381砂岩型铀矿床进行地浸模拟试验的基础上，应用以上概念和方法，对地浸过程中的溶质迁移过程进行了讨论，探讨了地浸过程的机理和发生的水文地球化学作用，总结了溶浸试验过程中的溶质迁移分带。在以上溶质迁移机理研究的基础上．论证了地浸地质工艺参数。地浸过程中分带的研究清楚地显示了浸铀的发展过程及其在各个时期各个地段铀浸出作用的进展程度。     

某深埋长隧地应力演化及围岩应力位移模拟研究

结合西部地区某深埋长大公路隧道信息化施工 ,对深埋长隧地应力演化及围岩应力位移进行了弹塑性有限元数值模拟研究。研究结果表明 ,隧道轴线现代地应力状况与隧道埋深、地层岩性及构造发育程度有关 ,最大地应力为40 0MPa左右 ;隧道周边围岩应力在曲边墙底部最大 ,约 3 8 0MPa ,隧道开挖引起的围岩应力影响范围约 2 5 0m ;隧道水平收敛和拱顶下沉位移与隧道埋深近于成直线关系。这些研究结果为深埋长隧信息化设计和施工以及围岩稳定性分析提供了科学依据。     

The role of the 1999 Chamoli earthquake in the formation of ground cracks

The moderate magnitude Chamoli earthquake that occurred in the Garhwal Higher Himalaya, in the early hours of March 29, 1999, caused intense damage to the ground and mountain slopes of the Alaknanda–Mandakini river valley and adjoining region. A systematic survey of this induced damage was conducted immediately after the earthquake occurred. Prominent shallow cracks of significant length, negligible width and indeterminate vertical extent, conspicuously tensile in nature, with little or no slip across the crack planes, were observed in the ground at several places along the surveyed route. These cracks had formed in the dynamic phase of the Chamoli earthquake process that is in the period of time during which the earthquake-generated seismic waves were passing through the geographic region of interest. However, we use the theory of earthquake-induced static (or long time) stress changes to visualize such cracks at some selected sites where ground damage was relatively more intense and varied to suggest lower bound estimates of the dynamic stress contributions of the main shock for their formation.Based on the results of our analysis we conclude that, just prior to the earthquake occurrence, under the influence of the local ambient stress field, the ground at these sites was already near failure in tension. To this, in its dynamic phase, the Chamoli earthquake induced stress perturbations, having, across the planes of the cracks, (i) shear components which were nearly equal and opposite to similar components of the ambient stress field and (ii) normal (tensile) components, necessary for triggering tensile failure of the ground. The σ₃ (or minimum principal stress) component of the resultant perturbed failure stress field thus became sufficiently tensile while the transverse stresses became sufficiently insignificant. This facilitated formation of major tensile cracks in the ground there. Our static estimates of the tensile stress changes at the different sites are, in essence, estimates of the minimal triggering stress perturbations that was provided by the Chamoli earthquake in the dynamic state for the formation of the tensile cracks there.     

The migration of fluid-filled grain boundaries in recrystallizing synthetic bischofite: first results of in-situ high-pressure, high-temperature deformation experiments in transmitted light

The effect of fluids on recrystallization behaviour is well known; however, the detailed microscale distribution of fluid in grain boundaries and the influence of fluid on grain boundary migration are still unresolved. In this study, in‐situ deformation experiments in transmitted light microscopy were undertaken, as this allows continuous and direct observation of the whole range of processes involved in fluid‐assisted grain boundary migration. A new see‐through deformation apparatus was developed to enable the control of fluid pressure. Bischofite containing small amounts of aqueous fluid was deformed at temperatures between 50 and 90 °C, over a range of fluid pressure from 0.5 to 1 MPa, and strain rates of 5 × 10^?6 to 1 × 10^?4 s^?1. The rates of grain boundary migration were measured at different temperatures and strain rates. Detailed observations during and after the deformation illustrate the evolution of migrating fluid‐filled grain boundaries and show that the incorporation of fluids from inclusions as well as their pinch‐off is dependent on the grain boundary velocity, the thickness of the grain boundary and the size and shape of the inclusions. Direct evidence is presented for the contraction of the grain boundary fluids into isolated inclusions after equilibrium conditions are attained.     

Modelling load–displacement response of driven piles in cohesionless soils under tensile loading

A new methodology for deriving the uplift load–displacement response of long driven piles in cohesionless soils is proposed. This method accounts for the effects of the friction fatigue processes during pile driving and the existence of locked-in residual stresses at the end of pile driving before commencing the pile load test. A hyperbolic formulation is utilized to simulate the nonlinear load transfer curves (the so-called t–z curves). The utility of this technique is demonstrated for a field pullout load test on a driven pile in sand. Predicted and measured load–displacement curves showed good agreement, indicating that this approach yields reasonable results as long as representative input parameters are employed.     

连续弯道水流模拟中二次流修正效果评价

为了选择适用于复杂连续弯道的二次流修正方法,选取了线性方法中两种典型的计算模式,通过在正交曲线坐标系二维浅水动量方程中增加扩散应力项开发了考虑二次流影响的平面二维水流模型。基于不同复杂度的4个连续弯道试验的水位和流速分布资料,通过理论分析和数值试验对比定量评估了传统二维模型和两种二次流修正方法在连续弯道水流模拟中的效果。测试结果表明,Delft3D模型的二次流修正方法自由度较高,适用于不同复杂度的连续弯道水流模拟,而Lien模型二次流修正方法适用于微弯或中弯,应用于中弯时需要慎重选用,不适用于急弯连续弯道模拟。两种方法比较,建议连续弯道水流模拟中优选Delft3D模型的二次流修正方法。     

强壮前沟藻(Amphidinium carterae Hulbert)在多重逆境条件下的生长和生理响应

尽管单一逆境条件对浮游植物产生的影响已被广泛重视,然而对于多重逆境条件对藻细胞生长生理的研究仍有空白。本研究通过测定强壮前沟藻(Amphidinium carterae Hulbert)光密度(OD750)、叶绿素a含量(chl a)、光合作用效率(F_v/F_m)、碳氮比(C/N)等多个生理指标,分析其在9种环境下(常温光照、低温和低温黑暗三种物理环境,结合全营养、缺氮、缺磷三种营养状态)对多重逆境的生长和生理响应。研究结果表明,在多重逆境条件下,单一物理逆境因素(低温或黑暗)较氮限制或磷限制对藻细胞生长和生理的不利影响更为显著。营养限制并同低温环境双重作用对生物量和碳氮比产生显著性影响(P0.01)。此外,低温和黑暗条件耦合作用下,SYTOX Green染色强度处于较低水平,chl a稳定、F_v/F_m有所升高,强壮前沟藻在逆境环境下作为群体的衰亡得以缓解。     

Application research of enhanced in-situ micro-ecological remediation of petroleum contaminated soil

Experimental study of enhanced in-situ micro-ecological remediation of petroleum contaminated loess soil was carried out in Zhongyuan oil production areas, and the enhanced in-situ micro-ecological remediation technique includes optimistic in-situ microbial communities, physical chemistry methods, alfalfa planting and regulation of soil environmental elements. Experiments showed that the oil content in the contaminated soil with oil content about 2 898.25 mg/kg can be reduced about 98.61% after in-situ micro-ecological remediation for 99 days, which demonstrated the effectiveness of in-situ micro-ecological remediation methods for petroleum contaminated soil in central plains of China, and explored the practical and feasible application of these methods.     

粉煤灰基地质聚合物水热原位转化NaP型沸石分子筛的研究

以固体废弃物粉煤灰基地质聚合物为基本骨架,通过水热合成法将其原位转化为自支撑Na P型沸石分子筛型体,并研究了水热过程中碱液浓度、碱液体积、水热温度和水热时间对NaP型沸石分子筛结晶程度、形貌和机械强度的影响,得到粉煤灰基地质聚合物原位转化Na P型沸石分子筛型体的适宜条件为水热温度100℃、NaOH浓度2.0mol/L、NaOH体积50 m L、水热时间24 h。所得Na P型沸石分子筛型体的抗压强度为23.21 MPa,BET比表面积为50.46 m~2/g,已达到工业生产P型沸石的水平。该法工艺简单,环境友好,可控成型。在此方法的基础上通过改变原料配比和反应条件,可以合成其他类型的沸石分子筛型体。     

安徽省东源斑岩型钨矿床白钨矿原位微量元素特征及其指示意义

新兴的白钨矿面扫描技术对于解释矿物微量元素特征具有重要的指示意义。文章选择皖南地区东源斑岩型钨矿床中白钨矿为研究对象,利用面扫描和阴极发光图像技术对矿物微区结构和原位微量元素特征进行系统研究。分析结果显示,白钨矿具有核边结构且微量元素特征具有明显的分带性,同一白钨矿颗粒核部亏损Mo、Nb、Ta元素,富集REEs,而边部相反。在此基础上,文章通过系统的白钨矿单点微量元素分析,反演了成矿流体性质和演化过程,提出东源钨矿床成矿流体氧逸度逐渐增高,成矿流体富集F挥发分且F含量逐渐增加,成矿物质很可能有幔源组分加入。通过白钨矿面扫描和阴极发光图像查明矿物微区结构,进而开展了白钨矿微区微量元素单点分析,有可能对成矿流体和矿质来源作出合理的解释。