高频电力线信息传输的电机模型与仿真

研究在电机驱动系统中,电力线通信的建模问题,着重讨论在高频时电机输入阻抗的特性下,电机模型的建立.通过实验测量得到电机和电力线在频率100 kHz～40 MHz的输入阻抗特性曲线,并分析高频输入阻抗的谐振特点.在Matlab中,提出基于阻抗公式的分析法、最小均方值误差估计法以及最优化方法进行模型的参数识别,将得到的参数代入模型中可以得到电机的阻抗模型.电机模型的精确度可以通过仿真曲线和测量曲线的逼近程度看出,从结果看仿真得到的阻抗曲线跟实际测量的阻抗曲线走向基本一致.     

海底热液硫化物矿体内部流体混合过程的数值模拟:以大西洋TAG热液活动区为例

大型海底热液硫化物矿体的形成机制是涉及多种控制因素的复杂地质过程,其中热液流体同海水的混合扮演着重要角色。大洋钻探计划(ODP)资料表明在大西洋TAG区热液硫化物矿体内部,热液流体同经过改造的海水之间发生着广泛的混合作用,这个过程在很大程度上控制着海底热液硫化物矿体的内部结构和化学组成。以TAG热液硫化物矿体为例,利用数值模拟方法模拟了热液流体与经过不同程度改造的海水的混合过程,试图探讨海水与热液流体混合在热液硫化物矿体形成中的作用。模拟计算结果表明:(1)来自矿体深部的热液流体与经围岩加热的下渗海水的混合是造成TAG热液活动区硬石膏大量沉淀的重要原因;(2)在热液流体与海水的混合过程中,混合流体的化学性质和矿物沉淀情况在330~310℃上下发生了较大变化,330~310℃是一个特殊的温度区域;(3)利用数值计算结果探讨了TAG热液活动区不同区块(TAG-1,TAG-2和TAG-5等)的流体混合作用和热液活动过程。     

基于五种油源的中重度风化溢油的常规鉴定指标的应用效果评估

本文利用采集于我国三大油田的五种原油样品开展了长达210天的溢油风化模拟实验,并依据相对偏差和重复性限数学分析法,进行溢油风化过程分析和诊断比值应用效果评估。研究结果表明:经过210天的风化,溢油鉴定诊断比值发生明显改变;其中来源于萜烷、甾烷和多环芳烃的诊断比值变化率要远低于正构烷烃,可用于中长期风化溢油鉴定。此外,研究发现,在这些有效诊断比值中有4个变化率较小,相对偏差低于5%,保持了较好的稳定性,更适合于重度风化溢油鉴定。     

Numerical and experimental study of a flapping foil generator

The energy extraction performance of a flapping foil generator is studied through experiment and numerical simulation. A practical flapping foil generator has been proposed. The heave motion and the pitch motion of the foil are adjusted through a crankshaft-like structure. The heave and pitch motions of the foil are transferred to the rotational motion of the main shaft. A pair of gears is adopted to increase the pitch angle. A prototype with pitch amplitude θ₀ = 60^∘ has been built and the experiment is carried out in a tunnel. The overall performance of the mechanism has been analysed. Good agreement of numerical results and experiment data has been found. Further simulations with larger pitch amplitudes are carried out. It is found that higher efficiency can be achieved with larger pitch amplitude at medium frequency.     

柴油的中重度风化鉴别指标研究

以柴油为研究对象,采用溢油风化模拟实验,从分子级水平揭示中长期风化作用对溢油组成的影响。利用相对偏差和重复性限法进行评价和筛选,研究表明,柴油在较短时间(10 d)内,phytane/n-C18和pristine/phytane特征比率可较好地作为油品鉴别的依据;在10~30 d的风化期间,pristine/phytane仍可作为油品鉴别的依据;较长期的风化过程后,上述三个正构烷烃特征比率对于油品鉴别已不再具备意义。所选多环芳烃诊断比值指标中,除MNR、MP/P外,其他参数(MPI-1,MPI-2,Rc,MPDF1,MPDF2,MNR)相对标准偏差在1.10%~5.40%,可较好地用于重度风化溢油源鉴定。     

内核及外围尺度对热带气旋强度影响的数值试验

采用WRF数值模式模拟并对热带气旋尺度与强度关系进行了探讨,且初步诊断分析了内核及外围尺度对热带气旋强度影响的可能机制,结果表明:(1)内核区较大时的缩放引起角速度变化是其影响热带气旋强度的机制之一;(2)内核区较小时的进一步收缩引起的眼区次级环流破坏是其影响热带气旋强度的一种机制;(3)外围尺度变化造成低层上升至高层的水汽总量变化,是其影响热带气旋强度的一种机制;另一方面,外围尺度发生变化使得低层气流向热带气旋内的辐合减少,亦是其影响热带气旋强度的机制之一。     

Simulation of the extreme waves generated by typhoon Bolaven (1215) in the East China Sea and Yellow Sea

Record-breaking high waves occurred during the passage of the typhoon Bolaven (1215) (TYB) in the East China Sea (ECS) and Yellow Sea (YS) although its intensity did not reach the level of a super typhoon. Winds and directional wave measurements were made using a range of in-situ instruments mounted on an ocean tower and buoys. In order to understand how such high waves with long duration occurred, analyses have been made through measurement and numerical simulations. TYB winds were generated using the TC96 typhoon wind model with the best track data calibrated with the measurements. And then the wind fields were blended with the reanalyzed synoptic-scale wind fields for a wave model. Wave fields were simulated using WAM4.5 with adjustment of C_d for gust of winds and bottom friction for the study area. Thus the accuracy of simulations is considerably enhanced, and the computed results are also in better agreement with measured data than before. It is found that the extremely high waves evolved as a result of the superposition of distant large swells and high wind seas generated by strong winds from the front/right quadrant of the typhoon track. As the typhoon moved at a speed a little slower than the dominant wave group velocity in a consistent direction for two days, the wave growth was significantly enhanced by strong wind input in an extended fetch and non-linear interaction.     

基于LabVIEW的自升沉式潜标模拟测试系统设计

自升沉式潜标正式布放使用前应进行大量的测试试验工作。为了能够在岸边或实验室对潜标的各项性能进行验证和调试工作,开发了基于LabVIEW的潜标模拟测试系统。该系统充分利用虚拟仪器的特点,采用模块化编程技术,利用软件模拟潜标在水下的各种运动状态及传感器感应的测量参数变化,或通过对现场测量数据的回放查找分析潜标系统本身存在的缺陷,实现潜标不下水或少下水就可以进行全面测试的目的。实验结果表明,利用模拟测试系统可以进行固定值、极值和连续变化值模拟,能够缩短设备开发周期,优化系统控制方案,对提高产品质量具有非常重要的作用。