红色泥岩风化含砾粘土的抗剪强度参数与物理性质相关性研究

研究了巴东组红色泥岩风化含砾粘土的含水量、密度及粘粒含量与内聚力C、摩察角φ的关系。通过配制粒径小于10mm的含砾粘土,按不同的含水量、密度及粘粒含量进行了大量的室内样品实验,分析总结了试验数据的一些规律,得出了适用的经验公式。这些经验公式揭示了该土体的一些特性,同时,当测得土体的某些物性指标后,可以运用这些公式计算该类土体的抗剪强度参数。这样,可避免少量试验数据用于设计时的不可靠性。     

大型金矿盲矿的原生叠加晕和包裹体气晕、离子晕预测准则

本文论述了热液型金矿床大矿、富矿的不同成矿阶段形成的矿体(晕)和石英包裹体气晕、离子晕的垂直分带及其叠加特点,建立了金矿原生叠加晕理想模式和包裹体气晕、离子晕理想模式,总结出了应用叠加晕预测盲矿的准则。     

对软土抗剪强度试验的探讨

对沿海一带新建公路、铁路所作的软土试验中，经过分析研究，提出了试验方法的选择，强度指标的确定，影响强度的因素等，进行了客观论述。     

氯盐和冻融耦合下水泥土的强度和破坏特征

为了研究氯盐侵蚀和冻融循环耦合下水泥土无侧限抗压强度和破坏特征, 进行了不同浓度氯化钠溶液下的水泥土冻融循环试验, 得到了冻融前后的冻融腐蚀因子、 体积变化率和变形模量, 分析了微观结构特征。结果表明： 在氯盐侵蚀和冻融循环耦合下, 水泥土的无侧限抗压强度、 冻融腐蚀因子均随着冻融循环次数的增加而呈现下降趋势; 氯盐浓度越高, 水泥土的无侧限抗压强度、 冻融腐蚀因子下降的幅度越大。随着冻融循环次数的增加, 在同种浓度溶液中, 水泥土的体积变化率增大, 变形模量减小; 氯盐浓度增大, 水泥土体积膨胀变大, 内部结构松散, 抵抗变形的能力减弱。相同冻融循环次数下, 氯盐溶液产生的损伤要大于清水中的损伤, 随着氯盐溶液浓度的增加, 水泥土内部微观结构损伤越严重。     

Adequacy of field pullout testing of soil nails

In practice, field pullout testing of soil nails is a widely accepted method for the construction quality control and the performance assessment of soil nail walls. At the design stage, field pullout tests provide useful information about the design bond strength of the nail–soil interface, which is critical in the determination of minimum soil nail length. To obtain a reliable and representative estimate of the design bond strength, it is necessary to conduct a sufficient number of field pullout tests. This study demonstrates the use of the concepts of simple random sampling and stratified random sampling to assess the adequacy of the ultimate bond strength adopted for design based on the minimum recommended number of field pullout tests.     

Thermal State and Strength of the Lithosphere Beneath the Chinese Mainland

The temperature distributions of the lithosphere underneath the mainland of China were estimated by applying local isostatic equilibrium-constrained geothermal calculations. Maps of the lateral temperature variation at depths of 40, 70, and 100 km are presented for the whole Chinese continent, with the thermal thickness of the lithosphere is calculated. Lithospheric roots of 160–200 km thickness underlie Tarim and the Upper Yangtze platform, but are absent beneath the entire Sino-Korean platform. In general, the Tibetan plateau and fold belts to the north have warm but thick lithospheres, whereas thinner thermal lithospheres have been identified in northern Tibet and central Tian Shan around Issyk-Kul Lake. The warm and soft lithosphere in the Tibetan plateau and Tian Shan are caused by uniform north–south shortening, which may represent a snapshot of the early stage of convective thinning of the convergent lithosphere. However, the lithospheric thinning beneath northeastern China might be related to volatile infiltration by dehydration of the deeply subducting Pacific slab during the Cenozoic. Dry and wet upper mantle rheology display “jelly sandwich” and “crème br?lée” pictures, respectively, demonstrating the mechanical behaviour of the Chinese lithosphere outside the Tibetan plateau. Considering a more geologically evident wet-mantle rheology, the “crème br?lée” model can approximate the lithospheric rheology for the most earthquake-prone regions on the Chinese mainland.     

黄土层中深基坑预应力锚索试验研究

在深基坑预应力锚索现场试验基础上,通过实测数据分析,提出在特定黄土地层中,当锚索锚固段长度设置合理时,其锚固段极限黏结强度标准值可高于现行规范推荐值。从试验锚索的不同荷载位移曲线,显现出预应力锚索在黄土地层中和其他黏性土地层中基本一致的受荷服役工况和荷载传递变化情况,试验曲线直观清晰地反映了每级张拉荷载下锚索的工作状态,并通过试验数据得到了相关拟合式。最后从试验数据反算锚索刚度并与现行规范推荐计算公式进行比较,得到一些有益结论。研究成果可以为黄土地区深基坑预应力锚索的设计、施工等提供参考。     

冻土与结构接触面循环剪切损伤模型

抗剪强度和压缩体应变是冻土与结构接触面的力学特性指标中最重要的两个参数,对冻土与结构接触面的力学分析至关重要。采用自行研制的大型多功能冻土-结构接触面循环直剪系统,开展了冻土与结构接触面力学性能及变形规律的试验研究,采用损伤力学理论,基于等应变分布假设、零弹性域假设、弹性应变无耦合假设,选择不可逆性体应变与最大不可逆性体应变的比值作为损伤因子,建立了用于描述冻土与结构接触面剪切行为的抗剪强度与压缩体应变损伤模型。通过相关试验对建立的损伤模型进行验证,结果表明,所建模型是准确、合理的。     

A two-grid search scheme for large-scale 3-D finite element analyses of slope stability

It is well known that the trial process for seeking the safety factor in the shear strength reduction finite element method (SSRFEM) is quite expensive, particularly for large 3-D slope stability analyses. The search algorithm for the safety factor is crucial to the entire solution process for the shear strength reduction finite element method, but few studies have attempted to exploit it. Among search algorithms, the commonly used bracketing and bisection search has not been fully optimised. Consequently, to improve the search scheme for the safety factor associated with the shear strength reduction finite element method, two strategies are suggested. First, a generalised bisection search algorithm is proposed to reduce the possibility of encountering non-convergence from a statistical point of view. To further improve the efficiency, a new two-grid scheme, characterised by a coarse mesh search and followed by a fine mesh search, is developed. Based on the drained or undrained analyses of the 3-D slope examples, the new search algorithm can markedly outperform the commonly used bisection search algorithms based on a single finite element mesh.     

吸力内摩擦角的确定方法研究

吸力内摩擦角在非饱和土抗剪强度理论中是一个关键参数,因受设备、测试技术以及试验方法等的限制,对于其值的确定难度较大。详细地分析了土的基本物理力学性质、测试方法对吸力内摩擦角数值的影响,并通过定性分析和定量计算结合,认为干密度、含水率、内摩擦角、黏聚力与吸力内摩擦角之间存在着一定的非线性关系,因而借用人工智能--BP神经网络的方法构建了4:9:1的网络结构模型,实现了对吸力内摩擦角 的预测和计算。通过预测结果的分析可知,该模型模拟和预测的精度均较高,因此,该种方法可以应用到非饱和土吸力内摩擦角值的预测之中去。