中国叠生型铁矿床成矿特征探讨

叠生成矿作用主要是指早期成矿作用被晚期成矿作用叠加、复合和改造。晚期成矿作用的性质常与早期成矿作用不同,也就是说,在早先己有矿床(或矿体、矿源层)的基础上,叠加复合了晚期成矿作用,即成矿时间上有先后、空间产出上有重叠、并对早先形成的矿床进行复杂的复合、叠加和改造,使成矿作用具有多样性、复杂性,并可形成大矿、富矿。铁矿床中叠生成矿作用广泛发育。按矿床或矿体产出和形成的地质特征,中国叠生型铁矿床可分为风化淋滤型、热液叠加改造型和热液叠加复合型3个亚类。风化淋滤型铁矿床在中国分布有限,规模不大,工业利用价值不大,因而中国的叠生型铁矿床主要是指热液叠加改造型和热液叠加复合型两个亚类。热液叠加改造型主要是指早期的铁矿床(或矿体、矿源层)经后期热液叠加改造,使早期的较贫铁矿床(或矿体、矿源层)成为较富铁矿床(或矿体),这是中国BIF型铁矿床中最重要的富铁矿类型,以鞍本地区弓长岭二矿区为典型代表。弓长岭二矿区铁矿,早期在新太古代形成条带状磁铁石英岩(2528 Ma,贫矿石),后期在古元古代,含矿热液交代改造贫铁矿形成富铁矿(1840 Ma)。热液叠加复合型主要是指后期脉型铁(或稀土元素等)矿床叠加在早期(沉积或其他成因)铁等矿床上而形成的矿床,如白云鄂博铁-铌-稀土元素矿床和黔西菱铁矿矿床。白云鄂博铁-铌-稀土元素矿床的形成与火成碳酸岩有关,在中元古代(1.3 Ga)左右,区内火成碳酸岩的侵位,在早期主要形成以岩浆熔离作用为主的铁-铌-稀土元素矿,晚期叠加了加里东期稀土-铌矿化热液脉。古陆边缘构造带或陆内活化带是形成叠生型铁矿床的有利构造空间,较大的地球化学块体,为形成多期、多成因的矿床提供物质来源,叠生型铁矿床的形成明显受构造的控制。叠生成矿是复杂地质过程的一种具体表现。热液叠加改造型和热液叠加复合型的叠生型铁矿床的形成是因中国独特的大地构造环境决定的。叠生成矿作用的研究,尚处在初步阶段。加强对叠生成矿作用的研究,了解其形成的地质背景、成矿机制、作用过程、控矿因素等,对发展矿床学研究,认识区域成矿特征和指导地质找矿具有重要的理论和实际意义。     

Reflectance spectroscopic characterisation of mineral alteration footprints associated with sediment-hosted gold mineralisation at Mt Olympus (Ashburton Basin,Western Australia)

Hydrothermal ore deposits are typically characterised by footprints of zoned mineral assemblages that extend far beyond the size of the orebody. Understanding the mineral assemblages and spatial extent of these hydrothermal footprints is crucial for successful exploration, but is commonly hindered by the impact of regolith processes on the Earth's surface. Hyperspectral drill core (HyLogger?-3) data were used to characterise alteration mineralogy at the Mt Olympus gold deposit located 35 km southeast of Paraburdoo along the Nanjilgardy Fault within the northern margin of the Ashburton Basin in Western Australia. Mineralogy interpreted from hyperspectral data over the visible to shortwave (400–2500 nm) and thermal (6000–14500 nm) infrared wavelength ranges was validated with X-ray diffraction and geochemical analyses. Spaceborne multispectral (ASTER) and airborne geophysical (airborne electromagnetic, AEM) data were evaluated for mapping mineral footprints at the surface and sub-surface. At the deposit scale, mineral alteration patterns were identified by comparing the most abundant mineral groups detected in the HyLogger data against lithology logging and gold assays. Potential hydrothermal alteration phases included Na/K-alunite, kaolin phases (kaolinite, dickite), pyrophyllite, white mica, chlorite and quartz, representing low-T alteration of earlier greenschist metamorphosed sediments. The respective zoned mineral footprints varied depending on the type of sedimentary host rock. Siltstones were mainly characterised by widespread white-mica alteration with proximal kaolinite alteration or quartz veining. Sandstones showed (1) distal white mica, intermediate dickite, and proximal alunite + kaolinite or (2) widespread white-mica alteration with associated intervals of kaolinite. In both, sandstones and siltstones, chlorite was distal to gold mineralisation. Conglomerates showed distal kaolinite/dickite and proximal white-mica/dickite alteration. Three-dimensional visualisation of the gold distribution and spatially associated alteration patterns around Mt Olympus revealed three distinct categories: (1) several irregular, poddy, SE-plunging zones of >0.5 ppm gold intersected by the Zoe Fault; (2) sulfate alteration proximal to mineralisation, particularly on the northern side of the Mt Olympus open pit; and (3) varying Al^IVAl^VISi^IV_–1(Mg,Fe)^VI_–1 composition of white micas with proximity to gold mineralisation. Chlorite that developed during regional metamorphic or later hydrothermal alteration occurs distal to gold mineralisation. ASTER mineral mapping products, such as the MgOH Group Content used to map chlorite (±white mica) assemblages, showed evidence of correlation to mapped, local structural features and unknown structural or lithological contacts as indicated by inversion modelling of AEM data.     

鄂尔多斯盆地纳岭沟铀矿床绿泥石特征及地质意义

纳岭沟铀矿床位于鄂尔多斯盆地北部,具有明显的后期热液作用的特征,矿体空间展布主要受控于绿色-灰色砂岩的过渡界面,与绿泥石化的蚀变砂岩关系密切。通过对纳岭沟铀矿床不同颜色砂岩中的绿泥石进行详细的岩相学研究和电子探针化学成分分析,依据绿泥石的成因与共生矿物的关系,识别出绿泥石主要的3种类型:填隙物型绿泥石,片状与黄铁矿共生型绿泥石以及黑云母蚀变型绿泥石;同时通过绿泥石的Fe-Si图解确定了纳岭沟铀矿床不同颜色砂岩中的绿泥石主要为铁镁绿泥石和密绿泥石。根据Al/(Fe+Mg+Al)-Mg/(Fe+Mg)的关系图解确定出不同颜色砂岩中的绿泥石具有铁镁质流体和泥质两种来源,通过绿泥石中主要阳离子与镁的关系图解和计算得出的绿泥石形成温度共同确定出绿泥石是多期次的中低温热液流体作用的产物。综合研究表明,纳岭沟铀矿床的绿泥石形成至少经历了温度稍高的还原性流体和温度稍低的氧化性流体等两个期次的流体作用,稍高温的还原性流体与成矿关系更为重要。与绿泥石形成有关的热液流体作用不仅带入了部分铀,还促进了铀的活化和运移。     

陕县宽坪银多金属矿区地质特征与成矿规律

陕县宽坪银多金属矿位于崤山矿集区内,已探明银铅锌储量达中等以上规模。通过研究矿区地质特征,认为矿体主要受构造蚀变带控制,在含矿热液的多期、多阶段交代和充填作用下,在构造有利部位富集成矿。     

广东厚婆坳整装勘查区锡多金属矿资源潜力分析

利用广东厚婆坳整装勘查区内的典型矿床、重点工作区、其他矿床的潜力评价成果,建立了8个定量预测模型区;然后通过综合信息分析,按热液型、斑岩型2种矿床类型在厚婆坳整装勘查区分别圈定并优选了最小预测区,进行资源量估算;最后对最小预测区进行归并整理,形成综合预测区,在此基础上提出了勘查部署建议。     

西藏浪卡子也金嘎波金矿地球化学异常特征及勘查标志

也金嘎波金矿位于冈底斯成矿带上。该矿是在区域化探发现Au、As、Ag等多元素组合异常的基础上,通过矿点检查、异常查证和地质普查等工作新发现的、具较大规模的热液型金矿床。Au元素为区域、矿区成矿指示元素,伴生元素有W、As、Sb、Ag、Bi、Pb、Hg、Mo等。金矿体受构造—岩浆岩带控制,围岩蚀变主要为硅化、绢云母化、碳酸盐化、高岭土化。该金矿床的发现对在高寒山区应用地球化学方法寻找新的金矿具有指导意义。     

新疆北山小常山铁矿矿物电子探针分析及矿床成因探讨

小常山铁矿位于新疆北山裂谷带西段,矿体赋存于辉长岩、辉长岩和大理岩接触带中,部分赋存于花岗闪长岩和大理岩接触带。前人研究辉长岩年龄为276±1.2Ma,与坡北铜镍硫化物岩浆矿床形成年龄一致,同属早二叠世。小常山铁矿中可见有明显的岩浆贯入现象。矿体主要呈透镜状、块状、脉状、薄层状。金属矿物主要为磁铁矿,含极少量的褐铁矿和黄铁矿;近矿围岩蚀变较弱,主要有石榴子石化、绿帘石化、大理岩化。电子探针研究表明,磁铁矿FeOT含量范围较大,主要分布在85%范围以上,Al_2O_3含量相对较高,TiO_2-Al_2O_3-(MgO+MnO)图解、TiO_2-Al_2O_3-MgO图解均显示热液接触交代成因特点,表明小常山铁矿的形成和岩浆热液的交代作用有关。石榴子石属于钙铝榴石-钙铁榴石系列,与典型矽卡岩矿床的石榴子石端员组分组成有一定差别。结合小常山铁矿体地质特征以及电子探针分析测试等研究,认为小常山铁矿是多成因的复合型矿床,具有岩浆成因和热液成因特征,但后者是主要成因。     

Phylogenetic position and systematics of the wood‐associate limpet genus Caymanabyssia and implications for ecological radiation into deep‐sea organic substrates by lepetelloid gastropods

The gastropod superfamily Lepetelloidea represents an extremely diverse lineage in terms of their utilization of different deep‐sea organic substrates that include sunken wood, leaves, whale and fish bones, egg cases of sharks and rays, annelid tubes and detrital cephalopod beaks among others. They also inhabit cold seeps and hydrothermal vents, thus presenting an interesting case for the evaluation of such organic substrates as ‘stepping stones’ into these chemosynthetically nourished environments. Here we show the first molecular phylogeny of the Pseudococculinidae, a primarily wood‐dwelling family and the most speciose in Lepetelloidea. Special emphasis is placed on the genus Caymanabyssia, for which the only subfamily Caymanabyssiinae has been established, and a new species Caymanabyssia solis is described herein and compared with previously known taxa in order to reconsider the morphological characteristics of lepetelloids on wood. Bayesian and likelihood trees reconstructed using four‐gene sequences reveal that Pseudococculinidae sensu auctt. is a polyphyletic taxon that is grouped by shared plesiomorphic conditions of characters including the radula, a digestive organ, the morphology of which is often governed strongly by diet and feeding ecology. The newly reinterpreted families Pseudococculinidae and Caymanabyssiidae represent reciprocal sister clades as a basal radiation in Lepetelloidea. Sunken wood might thus have served as an ancestral habitat from which species on other substrates and vent and seep taxa were derived.     

An Analytical Solution for Dynamic Response of the Plate with Different Impedances Subjected to Underwater Explosion

In this paper, the transmitted part of the incident wave is considered to revise Taylor’s solution, which is used to extend its application for analytical models to predict the response of the plate with different material properties. The influence of the material properties and the boundary condition of the plate on fluid and structural dynamics is systematically investigated. The analytical results are compared with those of detailed dynamic FE simulations and the two are in good agreement. The results indicate that the analytical method is valid and suitable for the plates with different material properties subjected to underwater explosion. It is found that Taylor’s results of the plate with small impedance are invalid, which indicates a potential application field for the analytical method.     

粉煤灰基地质聚合物水热原位转化NaP型沸石分子筛的研究

以固体废弃物粉煤灰基地质聚合物为基本骨架,通过水热合成法将其原位转化为自支撑Na P型沸石分子筛型体,并研究了水热过程中碱液浓度、碱液体积、水热温度和水热时间对NaP型沸石分子筛结晶程度、形貌和机械强度的影响,得到粉煤灰基地质聚合物原位转化Na P型沸石分子筛型体的适宜条件为水热温度100℃、NaOH浓度2.0mol/L、NaOH体积50 m L、水热时间24 h。所得Na P型沸石分子筛型体的抗压强度为23.21 MPa,BET比表面积为50.46 m~2/g,已达到工业生产P型沸石的水平。该法工艺简单,环境友好,可控成型。在此方法的基础上通过改变原料配比和反应条件,可以合成其他类型的沸石分子筛型体。