凤太矿集区东塘子铅锌矿床S、Pb同位素组成对成矿物质来源的示踪

东塘子铅锌矿床是秦岭成矿带中典型的铅锌矿床之一,前人对东塘子铅锌矿床成矿作用研究较多,但受限于测试手段及认识的局限性,多年来对其物质来源的认识仍未统一。本文在充分研究东塘子铅锌矿床地质特征的基础上,开展了相关样品的S、Pb同位素分析,分析对象包括了不同类型的铅锌矿石,讨论了该铅锌矿床的成矿物质来源、区内岩浆岩与铅锌成矿的关系等。研究表明:东塘子铅锌矿床矿石硫化物δ34S值变化范围为1.8‰～12.5‰,平均7.50‰,计算获得成矿流体中总硫δ34S∑S为7.7‰,显示海水硫酸盐(蒸发膏岩)与岩浆硫的混合来源特征。矿石铅同位素组成稳定,铅源主要来自富U-Th-Pb的上地壳与深部,可能与深部岩浆活动有关。研究结果表明,东塘子铅锌矿床的成矿过程与南秦岭印支期大规模多阶段构造-岩浆-流体活动密切相关,为下一阶段区内找矿工作提供了新的思路。     

水文基建工程招标采购流标成因分析及对策研究

因水文水资源项目自身的多样性、复杂性、特殊性;交通困难,施工条件恶劣;施工协调、建设难度大;涉及的专业多、技术要求高等因素,致使在工程和货物、服务的招标采购中,出现了不同程度的流标、废标现象。本文通过分析梳理水文基础建设工程项目流标原因,推演规律,研探对策。     

基于微信平台的水情报汛共享体系设计与实现

随着信息化技术的快速发展,传统的电话及网页人工报汛手段无法满足水文行业信息化发展的要求。结合移动互联网的发展趋势,将微信公众号平台与传统水情报汛相结合,通过微信平台实现了无层级、扁平化、可反馈的信息传输交流模式,并在用户体验、私人定制、可移动性、容错性、实时反馈等方面做了充分设计和优化,切实保障了水情报汛信息传输的"零中断",提升了水情报汛效率和精度,减少了报汛工作的时空限制,真正实现了"互联网+水情报汛"和高效、安全、个性化共享体系的建立。     

深海弯曲水道内部一种特殊的沉积单元:凹岸坝

在深海水道研究过程中,识别出深海弯曲水道内部存在一种特殊的沉积单元--凹岸坝,基于尼日尔三角洲陆坡区浅层高频三维地震资料,利用地震相分析技术,探究了凹岸坝的沉积结构特征和形成机制,讨论了其与水道弯曲丘(nested mounds)、曲流河凹岸滩坝之间的差异。研究结果表明:凹岸坝是分布于曲率较大、以垂向加积为主的末期水道弯曲凹岸处的坝体沉积单元,该沉积单元在地震剖面上表现为强振幅、连续性较好的反射特征,其内部沉积界面倾向于水道弯曲凸岸处,倾角约1°~20°,且在凹岸弧顶处达到最大值。凹岸坝形成的关键在于惯性作用,其造成水道内部重力流流体在弯曲处发生溢岸,导致流量减少,流体动能相应降低,流体携砂能力小于沉积物负载,造成沉积物快速沉降,从而形成凹岸坝。由于凹岸坝是一种连续性较好的砂体沉积,所以其可成为潜在的、储集性能较好的油气储集体。     

准噶尔盆地吉木萨尔凹陷二叠系芦草沟组优质烃源岩特征及其生烃机制研究

准噶尔盆地吉木萨尔凹陷芦草沟组发育凝灰物质,凝灰物质在页岩油形成过程中具有的重要作用,其发育层段也是页岩油分布最好的层段,凝灰物质的分布及与有机质生烃关系的研究对于吉木萨尔页岩油油气成藏规律的认识和深入研究具有重要意义。本文通过对吉木萨尔芦草沟组烃源岩精细评价及沉积环境分析,与烃类活动具有成因关系的成岩矿物解剖,探讨了形成优质页岩油源岩的控制因素和生烃机制。烃源岩定性评价结果表明,泥晶白云岩是吉木萨尔凹陷芦草沟组主要生油岩,烃源岩有机质丰度高,有机质类型以Ⅰ型和Ⅱ_1型为主,生烃潜力较好,R_o值分布在0.6%～1.1%,C_(29)αααS/(S+R)值范围在0.3～0.5,显示烃源岩处于成熟阶段;芦草沟组烃源岩中规则甾烷C_(27)、C_(28)、C_(29)分布为C_(27)C_(28)C_(29),结合微观分析认为其生烃母质以藻类和超微生物为主,Ts/Tm值较低,分布在0.05～0.18,具有高含量的β-胡萝卜烷,反映其母质处于半咸水的弱氧化—弱还原的沉积环境之中,而这一时期火山活动提供的凝灰物质对烃源岩的生烃环境及热演化进程都有重要影响,热演化突然增大的层段与有机质成熟的"甜点段"的分布深度一致。凝灰物质与含超微生物及藻类的泥晶白云岩的混合是导致生烃和早期生烃的重要原因,两者混合的不均一性导致页岩油分布与成熟度的不均匀性。     

西昌市泸山地区典型火后泥石流特征与成因机制研究——以响水沟左岸3#支沟为例

2020年3月30日,四川省凉山州西昌市经久乡发生森林大火,山火燃烧后形成的山火灰和烧焦土体在强降雨作用下极易启动形成泥石流,给西昌市泸山、琼海景区生态环境及当地百姓生命财产安全带来潜在地质灾害风险。以西昌市安哈镇响水沟左岸3^#支沟为例,采用野外调查、无人机航拍、地球物理探测、现场及室内实验等手段,对2020年5月1日该沟发生的火后泥石流流体特征、动力学参数及成因机制等开展研究,系统分析了山火及降雨过程对该次火后泥石流形成的影响机制。该成果可为系统认识西昌泸山“3·30”山火地区火后泥石流的运动特征、物源规模、激发雨量及其发展趋势研判提供科学参考。     

GEOMORPHOLOGICAL TRANSFER FUNCTION CALCULATED FROM DIGITAL ELEVATION MODELS FOR DISTRIBUTED HYDROLOGICAL MODELLING

Recently, several attempts have been made to relate the hydrological response of a catchment to its morphological and topographical features using different hypotheses to model the effect of the drainage network. Several transfer functions were developed and some of these are based on the theory of a linear model, the geomorphological unit hydrograph. The aim of this paper is to present a methodology to automatically identify the transfer function, using digital elevation models for applications in distributed hydrological modelling. The transfer function proposed herein is based on the Hayami approximation solution of the diffusive wave equation especially adapted for the routing hydrograph through a channel network. The Gardon d’Anduze basin, southern France, was retained for applications. Digital elevation models were used to extract the channel network and divide the basin into subcatchments. Each subcatchment produces, at its own outlet, an impulse response which is routed to the outlet of the whole catchment using the diffusive wave model described by two parameters: celerity and diffusivity functions of geometrical characteristics of the channel network. Firstly, a geomorphological unit hydrograph obtained by routing a homogeneous effective rainfall was compared with the unit hydrograph identified by a lumped model scheme, then the distributed model was applied to take into account the spatial variability of effective rainfall in the catchment. Results show that this new method seems to be adapted for distributed hydrological modelling; it enables identification of a transfer function response for each hydrological unit, here subcatchments, and then simulation of the contribution of each unit to the hydrograph at the outlet. © 1997 by John Wiley & Sons, Ltd.     

Mechanism for the instability of slopes composed of granular materials

The mechanism of instability of slopes composed of granular materials was examined through a tilting-box experiment using an assembly of aluminium rods and direct shear tests. A detailed observation of the experiment and the simple physical model led to the following conclusion. Avalanching of granular materials is triggered by rotation of rods at the slope surface. The force inducing the rotation was caused by the weight of the particles transmitted through contact points. Therefore, the mechanism of avalanching of granular materials was not comparable to the shear mechanism that has been considered to be responsible for the instability of slopes made of granular materials. © 1997 by John Wiley & Sons, Ltd.     

福建云霄石榴子石宝石矿物学特征

福建云霄是我国重要的宝石级石榴子石产地,然而该区石榴子石的致色机理不清,制约了对其形成机制的理解及后续开发利用。本文选取7件福建云霄橙黄-橙红色石榴子石样品,利用傅立叶红外光谱、紫外-可见光光谱和拉曼光谱分析其谱学特征,使用电子探针及激光剥蚀电感耦合等离子体质谱仪(LA-ICP-MS)分析限定其主量、微量元素组成。结果表明云霄石榴子石主要为锰铝榴石,其颜色主要与二价锰(Mn²⁺)和铁离子(Fe²⁺)对可见光的吸收有关,Mn²⁺导致其主体呈橙色,少量Fe²⁺控制其橙红色调,微量Ti⁴⁺使其呈褐色调。福建云霄石榴子石样品核部锰含量相对较低而铁、镁含量较高,锰元素含量由核部向边部逐渐升高,且具有重稀土元素富集、轻稀土元素亏损的左倾配分模式和Eu负异常,表明其形成于岩浆结晶作用晚期。     

四川彭州市灯杆坡滑坡变形特征及稳定性分析

作者等对"5.12"汶川地震诱发的彭州市灯杆坡大型堆积体滑坡的变形破坏特征、滑坡的过程机制及震后稳定性进行了较系统的研究。滑坡变形可分为三个区,Ⅰ区为主变形区,Ⅱ和Ⅲ区为Ⅰ区后缘开裂诱发的向两侧的塌陷;滑坡Ⅰ区和Ⅱ区为推移式滑坡,Ⅲ区为牵引式滑坡,主滑Ⅰ区为沿基覆界面的推移式滑移,后缘开裂下错,中前部挤胀开裂;降雨和地震因素对滑坡稳定性影响较大,暴雨和地震情况下滑坡体处于欠稳定到不稳定状态,其中Ⅰ区中前部存在较严重的局部稳定性问题。