Study of Metal Distribution in Raw and Screened Swine Manure

The growth of industrial swine production over the last few years has led to a growth in concern over effluents generated by the activity. Several elements, mainly toxic metals, can be present in swine wastewater and can have a serious environmental impact. It is important, therefore, to know the metal concentration before the discharge of wastewater. In this work the temporal metal distribution in swine manure and its potential reduction using coarse (2 mm) and fine (<0.45 μm) liquid‐solid separation techniques were investigated. In order to do this, different swine manure sample preparation methods for Al, Ba, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sr and Zn determination by Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) were tested. The acid mixtures used to digest the manure sample significantly affected the metal recovery. Good analyte recoveries were observed with nitric acid/hydrogen peroxide mixtures or nitric acid/perchloric acid mixtures. Sulfuric acid/hydrogen peroxide mixtures produced inconsistent results and poor recoveries, mainly for Ba and Pb. It was observed that metal concentrations in swine manure varied greatly with time, up to one order of magnitude, due to changes in swine production such as feed and animal numbers. Metals concentrations observed in the raw wastewater exceeded Brazilian limits for discharge into water bodies and recommendations for agricultural use. Results obtained from the liquid‐solid separation study showed that metals in the raw swine manure were not removed with coarse screening. However, the major fraction of metals were removed by filtration (0.45 μm), with the exception of Na, K and Sr. Thus, the use of liquid‐solid separation techniques that capture the fine solid fractions (and associated metals) from raw manure can have a favorable impact on the environment and contribute to swine production wastewater treatment.     

Dipping-interface Mapping Using Mode-separated Rayleigh Waves

Multichannel analysis of surface waves (MASW) method is a non-invasive geophysical technique that uses the dispersive characteristic of Rayleigh waves to estimate a vertical shear (S)-wave velocity profile. A pseudo-2D S-wave velocity section is constructed by aligning 1D S-wave velocity profiles at the midpoint of each receiver spread that are contoured using a spatial interpolation scheme. The horizontal resolution of the section is therefore most influenced by the receiver spread length and the source interval. Based on the assumption that a dipping-layer model can be regarded as stepped flat layers, high-resolution linear Radon transform (LRT) has been proposed to image Rayleigh-wave dispersive energy and separate modes of Rayleigh waves from a multichannel record. With the mode-separation technique, therefore, a dispersion curve that possesses satisfactory accuracy can be calculated using a pair of consecutive traces within a mode-separated shot gather. In this study, using synthetic models containing a dipping layer with a slope of 5, 10, 15, 20, or 30 degrees and a real-world example, we assess the ability of using high-resolution LRT to image and separate fundamental-mode Rayleigh waves from raw surface-wave data and accuracy of dispersion curves generated by a pair of consecutive traces within a mode-separated shot gather. Results of synthetic and real-world examples demonstrate that a dipping interface with a slope smaller than 15 degrees can be successfully mapped by separated fundamental waves using high-resolution LRT.     

Effect of urbanization on runoff characteristics of the On-Cheon Stream watershed in Pusan,Korea

This study investigated the effect of urbanization on runoff from the On-Cheon Stream watershed in Pusan, Korea. This watershed has been experiencing considerable urbanization since the 1960s. There are two gauging stations in the watershed. For one of the stations there are recent flow data and for the other flow data were observed in the past. A linear reservoir model was chosen and runoff was analysed for several flood events. The linear reservoir model has been found to generate flood hydrographs accurately for both gauging stations, and its applicability to the study area has also been established. Using two methods of computing effective rainfall or rainfall excess (ϕ-index and constant percentage method), the results of runoff analyses were investigated. The ϕ-index method yielded better results than the constant percentage method. A comparison of hydrographs observed in the past with the simulation results at the Ie-Sup bridge site revealed that the peak discharge increased and the mean lag time of the study area decreased owing to urbanization over the past two decades. It is also possible to evaluate the effect of urbanization quantitatively. © 1998 John Wiley & Sons, Ltd.     

野外简易脱气装置简介

根据水力学原理结合水氡在实验室分析中水样鼓泡脱气的方法 ,进行了大量的野外试验 ,研制开发了野外简易脱气装置。通过几个月的试观测 ,脱气装置气流稳定 ,脱气效率高 ,完全可以满足自动化观测仪器对气量的需求。该装置解决了地下水化学在野外冷水泉无法进行气体观测的难题 ,而且制作简单、费用低廉 ,非常便于推广。     

Flow time estimation with spatially variable hillslope velocity in ungauged basins

The automated spatial estimation of the hillslope runoff dynamics is used as a valuable tool for the estimation of the travel time distribution (flow time), a major factor for the hydrologic prediction in ungauged basins. In fact, while the flow time function is usually obtained by rescaling the flow paths with constant channel and hillslope velocities, in this work a spatially distributed kinematic component, as a function of terrain features and in particular slope and land use, is implemented and its influence on the hydrologic response is tested by means of the Width Function Instantaneous Unit Hydrograph (WFIUH) framework. Hillslope surface flow velocities are evaluated by applying different uniform flow formulas within an automated DEM-based (terrain analysis) algorithm. A comparison test of the performances of the Manning, Darcy, Maidment and Soil Conservation Service uniform flow equations is performed for several case studies in Italy pertaining to different climatic and geomorphic conditions. Results provide new insights for a better understanding of the flow time function also introducing a more parsimonious and physically-based calibration scheme of the WFIUH.     

Efficiency of heavy liquid separation to concentrate magnetic particles

Low-temperature rock magnetic measurements have distinct diagnostic value. However, in most bulk marine sediments the concentration of ferrimagnetic and antiferromagnetic minerals is extremely low, so even sensitive instrumentation often responds to the paramagnetic contribution of the silicate matrix in the residual field of the magnetometer. Analysis of magnetic extracts is usually performed to solve the problems raised by low magnetic concentrations. Additionally magnetic extracts can be used for several other analyses, for example electron microscopy or X-ray diffraction. The magnetic extraction technique is generally sufficient for sediments dominated by magnetite. In this study however, we show that high-coercivity components are rather underrepresented in magnetic extracts of sediments with a more complex magnetic mineralogy. We test heavy liquid separation, using hydrophilic sodium polytungstenate solution Na₆[H₂W₁₂O₄₀], to demonstrate the efficiencies of both concentration techniques. Low-temperature cycling of zero-field-cooled, field-cooled and saturation isothermal remanent magnetization acquired at room temperature was performed on dry bulk sediments, magnetic extracts, and heavy liquid separates of clay-rich pelagic sediments originating from the Equatorial Atlantic. The results of the thermomagnetic measurements clarify that magnetic extraction favours components with high spontaneous magnetization, such as magnetite and titanomagnetite. The heavy liquid separation is unbiased with respect to high- and low-coercive minerals, thus it represents the entire magnetic assemblage.     

氯化钡法在盐湖高锂卤水中高效分离硫酸根的研究

在生产碳酸锂的工艺中,尤其除硫过程中,锂会伴随其它盐类析出,造成锂的大量夹带损失.因此盐湖高锂卤水中硫酸根的脱除对锂的高效富集,提高锂的收率有重大意义.研究以盐湖高锂卤水为原料,通过加入氯化钡,采用化学沉淀法除去卤水中的SO2-4.详细考察了原料配比(SO2-4与Ba2+的摩尔比)、加料方式、加料时间、反应时间、搅拌速...     

非传统稳定同位素分析技术要点

高精度高质量的同位素分析技术是开展非传统稳定同位素地球化学工作的前提。同位素分析是不断提取样品真实信息的过程,包括样品制备、化学分离、质谱测定和数据处理4个基本步骤。在同位素分析过程中,每一环节都有可能引入空白或者污染,或造成同位素分馏,引发信息“失真”。为了准确获得样品的真实同位素组成,必须有效避免污染并精准校正在分析过程中可能的干扰。以Ca同位素为例,在总结前人工作的基础上,探讨了各个步骤所涉及的分析要点,为建立其他同位素体系的分析方法提供参考,为后续储库探讨、机理解析及应用研究提供技术支撑。     

重磁等值线与经纬网的分离及其矢量化

本文利用经纬网在局部范围的直线性直线的平均ｆｒｅｅｍａｎ链码等于其上任意一点的链码的这一特性,达到自动分离经纬网与等值线的目的,为实现等值线图的自动矢量化打下了基础。     

地质样品中金的测定方法研究

简介了近年来地质样品中金的分析测试方法,重点对地质样品金分析中的样品加工及分解、分离富集、测定方法等方面进行概述,并对我实验测试中心在相关方面工作进行了简单介绍.