A mathematical model of concentrate solids content for the wet drum magnetic separator

Low concentrate density from wet drum magnetic separators in dense medium circuits can cause operating difficulties due to inability to obtain the required circulating medium density and, indirectly, high medium solids losses. The literature is almost silent on the processes controlling concentrate density. However, the common name for the region through which concentrate is discharged—the squeeze pan gap—implies that some extrusion process is thought to be at work. There is no model of magnetics recovery in a wet drum magnetic separator, which includes as inputs all significant machine and operating variables.A series of trials, in both factorial experiments and in single variable experiments, was done using a purpose built rig which featured a small industrial scale (700 mm lip length, 900 mm diameter) wet drum magnetic separator. A substantial data set of 191 trials was generated in this work. The results of the factorial experiments were used to identify the variables having a significant effect on magnetics recovery.It is proposed, based both on the experimental observations of the present work and on observations reported in the literature, that the process controlling magnetic separator concentrate density is one of drainage. Such a process should be able to be defined by an initial moisture, a drainage rate and a drainage time, the latter being defined by the volumetric flowrate and the volume within the drainage zone. The magnetics can be characterised by an experimentally derived ultimate drainage moisture. A model based on these concepts and containing adjustable parameters was developed. This model was then fitted to a randomly chosen 80% of the data, and validated by application to the remaining 20%. The model is shown to be a good fit to data over concentrate solids content values from 40% solids to 80% solids and for both magnetite and ferrosilicon feeds.     

中尺度非静力模式中常用气压分离技术的研究

分析了气压分离和不分离,在几种不同的层结情况下,垂直气压梯度的截断误差.结果表明:基本场取法不当,会引起巨大的截断误差,甚至和不分离时相当;反之,则较小.根据计算,提出了一种取基本场的方法,在一定条件下,可以使气压偏差的垂直梯度的截断误差比不分离时的相应误差小一个量级,从而,可以取较小的垂直分辨率.     

氢化物分离一化学发光法测定痕量锑

采用Luminol－H。O。Air（巨）化学发光反应体系作为分析检测方法，建立了一个测定地质样品中痕量锑的化学发光分析法。方法的原理是用AgNO。吸收由样品发生的氢化锑气体，使吸收液中生成Sb（巨）与过量的K。Cr。O，反应生成Cr（1），方法的检出限为0．6us／mlSb，工作曲线的线性范围是2～1000ng／mlSb，测定的相对标准偏差小于5％。本方法已用于地质样品中痕量佛的测定。     

运用X射线衍射和多重峰分离程序解析高岭石的结构缺陷

本文尝试运用Ｘ射线衍射与多重峰分离方法研究高岭石的结构缺陷，重新评价了Ｈｉｎｃｋｌｅｙ（１９６３）结晶指数（ＨＩ），运用０２，１１区域对（１１１）和（１１１）峰的分峰结果，定义了新的结晶度指数：ＣＩ＝（Ｉ１１１＋Ｉ１１１）／Ｉ１１０，它完全以衍射峰的强度进行计算，较灵敏地反映出高岭石真实的结构信息，探讨了高岭石结晶度与高峰石对称性，有序度以及与高岭石Ｐｂ／３滑移缺陷的关系，结果证明高岭石结晶度越高     

井间地震串联滤波波场分离方法

本文根据井间地震波场响应以及多种波场分离方法的性能，采用基于Ｋ－Ｌ变换的特征向量滤波与中值滤波相结合的串联滤波方法分离井间地震观测到的上、下行反射波。数值计算结果表明：在波场分离过程中，由于同时综合考虑了地震波能量主分量分布以及反射波同相轴时差两个参数，使得分离效果明显、处理更为简便，具有滤波特征矢量的选取条件更为宽松、无需精确确定拉平轴的时间等特点。     

Regionalization of unit hydrograph parameters: 1. Comparison of regression analysis techniques

Hydrologic regionalization is a useful tool that allows for the transfer of hydrological information from gaged sites to ungaged sites. This study developed regional regression equations that relate the two parameters in Nash's IUH model to the basin characteristics for 42 major watersheds in Taiwan. In the process of developing the regional equations, different regression procedures including the conventional univariate regression, multivariate regression, and seemingly unrelated regression were used. Multivariate regression and seeming unrelated regression were applied because there exists a rather strong correlation between the Nash's IUH parameters. Furthermore, a validation study was conducted to examine the predictability of regional equations derived by different regression procedures. The study indicates that hydrologic regionalization involving several dependent variables should consider their correlations in the process of establishing the regional equations. The consideration of such correlation will enhance the predictability of resulting regional equations as compared with the ones from the conventional univariate regression procedure.     

Regionalization of unit hydrograph Parameters: 2. Uncertainty analysis

Hydrologic model parameters obtained from regional regression equations are subject to uncertainty. Consequently, hydrologic model outputs based on the stochastic parameters are random. This paper presents a systematic analysis of uncertainty associated with the two parameters, N and K, in Nash's IUH model from different regional regression equations. The uncertainty features associated with N and K are further incorporated to assess the uncertainty of the resulting IUH. Numerical results indicate that uncertainty of N and K from the regional regression equations are too significant to be ignored.     

Regionalization of unit hydrograph Parameters: 2. Uncertainty analysis

Hydrologic model parameters obtained from regional regression equations are subject to uncertainty. Consequently, hydrologic model outputs based on the stochastic parameters are random. This paper presents a systematic analysis of uncertainty associated with the two parameters, N and K, in Nash's IUH model from different regional regression equations. The uncertainty features associated with N and K are further incorporated to assess the uncertainty of the resulting IUH. Numerical results indicate that uncertainty of N and K from the regional regression equations are too significant to be ignored.     

地质样品中微量金银的在线分离富集方法

提出用ＶＳ－Ⅱ型强碱性阴离子交换纤维定量富集、硫脲解脱，流动注射在线分离富集—火焰原子吸收光谱法测定地质样品中痕量金银的分析方法。该方法检出限低，金为１．４μｇ／ｍＬ，银为０．３５μｇ／ｍＬ，相对标准偏差均小于２％，采样频率为１２０次／ｈ，用于地质样品中痕量金银的直接测定，结果令人满意。     

面雨量不均对GIUH非线性改正探讨

地貌单位线(GIUH)基于流域地貌特征和概率方法，在我国许多地区得到广泛应用。针对面雨量分布不均问题，通过分析初始概率的变化，考虑GIUH的非线性改正，并用实际资料进行了验证。