MAPGIS组件技术在平硐空间数据管理中的应用

利用MAPGIS组件技术,实现了将隧道施工中采集的多源种类数据信息直接生成MAPGIS支持的平硐图形文件,并且能将平硐的图形信息和隧道采集数据进行连接与同时管理的功能。这充分发挥了GIS管理空间数据和属性数据的优势,合理管理平硐基础空间信息资料,也解决了由手工矢量化和数字化采集等常规方式获取平硐图形信息工作量较大的缺点,以及平硐图形信息(空间数据)与采集的数据信息(属性数据)不能在一般非GIS系统中实现对应连接管理的问题。     

GIS叠置图层方差分量的极大似然估计

针对GIS叠置中的同名点,以维希特分布密度为似然函数,提出了各图层方差分量的极大似然估计方法。该方法不依赖残差,不需要迭代就能估计未知参数和方差分量。     

Sliding fragility of block‐type non‐structural components. Part 1: Unrestrained components

Motivated by the development of performance‐based design guidelines with emphasis on both structural and non‐structural systems, this paper focuses on seismic vulnerability assessment of block‐type unrestrained non‐structural components under sliding response on the basis of seismic inputs specified by current seismic codes. Two sliding‐related failure modes are considered: excessive relative displacement and excessive absolute acceleration. It is shown that an upper bound for the absolute acceleration response can be assessed deterministically, for which a simple yet completely general equation is proposed. In contrast, fragility curves are proposed as an appropriate tool to evaluate the excessive relative displacement failure mode. Sample fragility curves developed through Monte‐Carlo simulations show that fragility estimates obtained without taking into account vertical base accelerations can be significantly unconservative, especially for relatively large values of the coefficient of friction. It is also found that reasonable estimates of relative displacement response at stories other than the ground in multistorey buildings cannot in general be obtained by simply scaling the ground acceleration to the peak acceleration at the corresponding storey. Failure modes considered in this study are found to be essentially independent of each other, a property that greatly simplifies assessment of conditional limit states. Copyright © 2002 John Wiley & Sons, Ltd.     

中国三峡地区汛期降水量的正态性研究

为了分析三峡地区降水量序列的正态性和谱结构,对降水量的常见各种变换进行试验性研究。试验包括单站降水量、降水量的平方根、立方根和Γ分布概率值等非线性变换,以及级别变换。研究区域多站平均降水量、区域降水量的主分量、区域降水量的非线性变换后的主分量和区域降水量的级别变换后的主分量等序列。研究发现三峡地区单站降水量的各种变换不改变序列原始谱结构,仅影响概率分布的偏度和峰度,使其较好地遵从正态分布,其中以Γ分布的变换以及级别变换在分布的偏度上为最好。 区域降水量的各种变换的综合指数(区域平均值和主分量)正态性及谱结构分析表明,除区域平均值变换后不改变原单站序列的谱结构外,主分量的综合指数能改变原单站序列的谱结构,同时也影响概率分布的偏度和峰度,使其能较好地遵从正态分布。其中以降水量的立方根和Γ分布概率变换以及级别变换,在分布的偏度上有较好的效果。     

恐龙蛋化石物质组分研究

研究了ＸＬ０１恐龙蛋化石蛋腔内壁和腔内絮状物质的无机组分。采用常规的双目实体显微镜、偏光显微镜及扫描电子显微镜、电子探针和Ｘ光衍射仪，对蛋腔内主要三种矿物物相的物理性质、化学组成及矿物晶体结构进行了研究。并对腔内的矿物形态、结构特点及有利于有机大分子ＤＮＡ保存的条件做了讨论     

Are open fractures necessarily aligned with maximum horizontal stress?

Fluid flow in fractured rock is an increasingly central issue in recovering water and hydrocarbon supplies and geothermal energy, in predicting flow of pollutants underground, in engineering structures, and in understanding large-scale crustal behaviour. Conventional wisdom assumes that fluids prefer to flow along fractures oriented parallel or nearly parallel to modern-day maximum horizontal compressive stress, or S_Hmax. The reasoning is that these fractures have the lowest normal stresses across them and therefore provide the least resistance to flow. For example, this view governs how geophysicists design and interpret seismic experiments to probe fracture fluid pathways in the deep subsurface. Contrary to these widely held views, here we use core, stress measurement, and fluid flow data to show that S_Hmax does not necessarily coincide with the direction of open natural fractures in the subsurface (>3 km depth). Consequently, in situ stress direction cannot be considered to predict or control the direction of maximum permeability in rock. Where effective stress is compressive and fractures are expected to be closed, chemical alteration dictates location of open conduits, either preserving or destroying fracture flow pathways no matter their orientation.     

“雪龙号”2003北极航次气相多环芳烃纬度分布观测

2003年“雪龙号”北极科学考察期间,对沿途海洋大气进行采样,分析其中气相多环芳烃的空间分布。结果显示,气相中主要是2-4环的多环芳烃,其中菲为主要的化合物,平均占到总多环芳烃的55.1%。在整个航程的广泛区域尺度内,气相总多环芳烃浓度在1043.9-92993.1pg/m3。空间分布上,远东亚的海面>北太平洋海面>北极圈以内海面;总多环芳烃的浓度随纬度升高呈现显著降低的趋势。通过Clausius-Clapeyron方程对浓度和温度相互关系的分析表明,温度是控制气相多环芳烃长距离传输的主要因素。     

山东半岛典型海岸带多环芳烃分布特征、来源解析及风险评价

山东半岛海岸带面临着各类复杂的环境问题,尤其是受到了多环芳烃(PAHs)等持久性有机物的污染,本文研究了整个山东半岛典型海岸带62个站点表层沉积物中PAHs的含量及其分布特征,并对其来源和潜在风险进行解析与评价。研究表明,该地区表层沉积物中16种PAHs总含量为0.06~3191.40 ng/g(平均值262.08 ng/g),与国内外海岸带相比,山东半岛海岸带表层沉积物中PAHs整体污染状况处于较低水平,但个别站点的PAHs含量偏高。运用特征比值法、相关性分析及主成分分析法解析研究区PAHs主要来源为木柴、煤炭、油类的燃烧以及油类泄露的联合作用。采用效应区间低值法(ERL)和中值法(ERM)对PAHs进行生态风险评价,结果表明莱州湾周边所有站点及威海、青岛周边个别站点苊、芴浓度位于ERL值与ERM值之间,但多数站点对生态环境潜在负面效应很小。山东半岛典型海岸带中PAHs对生物的毒副作用尚在安全可控范围内,极少对生态环境产生负面效应。     

Stabilisation/solidification and bioaugmentation treatment of petroleum drill cuttings

Petroleum drill cuttings are usually treated by techniques suitable for particular contaminant groups. The significance of this study consists in the development of a treatment technology that can simultaneously handle the hydrocarbon and metal constituents of drill cuttings. Bioaugmentation is combined with stabilisation/solidification (S/S), within S/S monoliths and in granulated S/S monoliths. Portland cement was used for S/S treatment at 30% binder dosage. Bioaugmentation treatment involved two bacterial densities of a mixed culture bio-preparation. The effects of inclusion of compost, fertiliser and activated carbon were also evaluated. After 28 days, the combined S/S and bioaugmentation treatments recorded up to 15% higher total petroleum hydrocarbon (TPH) loss than control S/S treatment without bioaugmentation. Embedding fertiliser, activated carbon and higher bacterial density within S/S monoliths resulted in the highest (99%) TPH reduction but higher concentrations of metals. The addition of compost and lower bacterial density to granulated S/S monoliths led to similar (98%) TPH degradation and lower amounts of metals. The results suggest that with better mixture optimisation, combining S/S and bioaugmentation could engender more sustainable treatment of drill cuttings.