Optimization of grid-drilling using computer simulation

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.     

黄海海域陆相中生界地震反射特征及靶区优选

利用前人对黄海海域油气勘探成果，作者对北黄海盆地，南黄海盆地北部坳陷陆相中生界进行了研究。结果认为：黄海海域陆相中生界分布广、厚度大、具有良好的生、储、盖组合，是该区下步油气战略性调查的首选目标。并提出北黄海陆相中生界油气勘探应以东部凹陷为主，同时兼顾中部凹陷。南黄海北部坳陷近期油气勘探重点应选择北部凹陷和加大东北凹陷的研究力度。南黄海南部坳陷陆相中生界油气勘探重点放在南五和南七凹陷。     

胜利二号极浅海步行坐底式钻井平台防腐措施研究

本文根据胜利二号极浅海步行坐底钻井平台的作业和工作环境特点，进行了防腐措施研究，设计了切合实际的防腐措施。该平台在海上作业近四年进坞修理，经观测防腐情况良好。     

Sedimentary environment and development controls of the hydrocarbon source beds:Middle and Upper Proterozoic in northern North China

Problem on development control of marine source bed hold in Chinese petroleum industry progression. The Hongshuizhuang Formation,Tieling Formation and Xiamaling Formation in the Middle and Upper Proterozoic are important hydrocarbon source beds in northern North China, and investigation of their sedimentary environments and the controls has great significance for petroleum exploration in North China. Based on sedimentology (sequence stratigraphy), palaeoecology, sedimentary geochemistry, and sedimentary palaeogeography, their development pattern is discussed. All these studies indicate that the development controls of the hydrocarbon source beds include a favorite palaeogeographic location, exceeding propagation of biomes in low and middle latitudes, anoxic environments, enrichment of phosphorus element and the adsorption of clay minerals during the preservation of organic matter in the marine carbonates.     

科学大洋钻探中的新技术

大洋钻探诸多科学目标的实现与包括钻探、取芯、测试和海底观测技术在内的各种新技术的开发和革新密不可分。即将开展的IODP计划,将对各种技术提出新的要求。在钻探技术上,将联合使用多平台,以实现区域更广深度更大的钻探作业;在取芯技术上,取样范围更广,从各种岩石取样到地下流体的取样,并要求样品保持原始状态,同时确保获得更高的岩芯采收率;在测试上,要求采用随钻测试技术,以适时地获得地下真实信息;在观测技术上,要求开发各种工具,去除由于钻探造成的扰动,使得各种观测仪器能够进行长期的跟踪观测。     

鄂尔多斯盆地伊盟隆起区东部微烃渗漏区的遥感识别及其意义

微烃渗漏遥感探测的机理主要是建立在烃类微渗漏异常地球化学表征和形成的基础上。本文主要依据Schum acher(1996)和Saunders等(1999)提出的烃类微渗漏异常地球化学原理和模型,以鄂尔多斯盆地伊盟隆起东部为研究区,以多光谱遥感和航空放射性遥感为探测手段,分别利用氧化铁指数(TM3/TM1)、亚铁指数(TM5/TM4)和黏土化指数(TM5/TM7)来识别Fe3 氧化物、Fe2 氧化物和有机质、黏土化和碳酸盐化的相对富集区,同时用矿物组合图像来增强显示上述信息。综合亚铁指数(TM5/TM4)分割图像、矿物组合图像、航放铀、钍、钾信息及钍归一化铀指数等信息,提取了研究区微烃渗漏地段。研究表明,研究区存在两条Fe2 氧化物和有机质相对富集区带。一条为与库布齐沙漠走向近于一致的北部近东西向带,它与石油部门发现和描述的油气渗漏区域基本一致。另一条为泊海子—准召—新庙不连续的北西向带,它的北界与泊海子—准召断裂展布基本一致。在垂直中部北西向微烃渗漏带的剖面上,清晰显示亚铁指数(Fe2 )、航放测量铀(U)、钍归一化铀(Ud)为正异常;氧化铁指数(Fe3 )、航放测量总道值(Tc)和钾(K)、钍归一化(Kd)为负异常的特点。研究认为地表还原带是由油气微渗漏形成的,推测受断裂、裂隙带控制的、主要由油气微渗漏形成的还原带对东胜铀矿带形成聚集起了重要作用。     

遥感技术预测油气勘探靶区

应用遥感技术预测油气勘探靶区具有低成本、高效率的特点。目前有直接和间接两种油气遥感方法用于预测油气勘探靶区。简单介绍了这两种方法的原理,重点对遥感影像中的线-环影像构造异常和烃渗漏异常所表现的特征进行了全面总结,最后对遥感技术在预测油气勘探靶区的应用前景进行了展望。     

小口径割管器的设计与应用

某盐井施工时,在245．00—270．00m孔段有25m钻具被水泥固结,进行透孔作业时,扫至孔深250．60m时,扫孔用岩心管被扫落的钻杆接头碎块卡住拧断,透孔时发现孔内遗留3．2m断岩心管、钻头等物。根据钻孔结构与遗留钻具的特点．自行设计一种主要由活塞柱、割刀片和复位弹簧组成的小口径割管器,将水泥固结钻具割断,并将钻具和多种残留管材打捞出孔。从割断后打捞上来的钻杆分析,钻杆切割面光滑、平整,钻杆被完全切透,说明此种割管器设计合理,各部件动作有效。     

以钻代槽勘查方法研究与应用

为解决槽、井探等传统地表揭露手段自身局限性问题及减少对环境的破坏,提出以钻代槽勘查方法研究的技术路线,总结归纳出浅钻技术方法与钻孔布孔方案,同时初步探讨了基于钻孔数据的三维地质建模方法。最后将以钻代槽方法成果在西藏等地进行了推广应用,验证了可行性和有效性。     

ZHDN-SDR 150A型高频声波钻机设计

文章主要介绍了ZHDN-SDR 150A 型高频声波钻机设计及其验证测试,为该钻机应用于污染场地调查和治理提供理论依据和技术指导。论文阐述了钻机总体设计思路及主要性能参数指标,系统分析了高频声波动力头、钻机主体、配套钻具结构设计及其技术创新。该钻机在两种不同地层进行了验证测试,各项测试指标均达到设计要求。将验证测试结果与国内外同类钻机对比表明,ZHDN-SDR 150A型钻机主要性能参数与关键装置已处于国内先进和国外并跑水平。该型钻机在振动频率、地层适用性、钻具使用寿命等方面优势显著,但是存在过高温度运行条件下钻进效率降低、智能自动化水平不足的问题,需进一步研发耐高温强硬度新材料和改进远程无线操控系统。