阜阳华纺新天地超长空桩成孔施工控制措施

阜阳华纺新天地桩基工程,原计划基坑底面施工调整为地面施工,增加了近14 m的空桩。为此,工程桩施工质量存在桩位、孔底沉渣厚度、钢筋笼位置、砼质量、砼桩顶标高等方面控制的相关问题。本文介绍了其施工情况,其经验可供类似工程借鉴。     

冲击地压关键层远程区域水力压裂防治技术

针对我国目前冲击地压防治工程人员身处冲击危险区域,无法实现区域先行、超前治理的局面,论文提出了矿井冲击地压关键层远程钻孔水力压裂防治技术。分析了我国冲击地压矿井的地质条件和近几年重大冲击地压灾害的特点,认为华北石炭—二叠系煤田和侏罗系煤田很多冲击地压煤矿煤层上覆地层,普遍发育厚层坚硬的砂岩关键层,能量的释放符合冲击地压形成的“3因素”理论。经论证,关键层脆性强,硬度大,易于压裂,利用水力压裂法解除地应力是合适的;井下长钻孔、地面深孔和地面导斜钻孔的施工技术和钻孔水力压裂技术已成熟,实现远程钻孔水力压裂区域性的防治冲击地压是可行的。工业性试验显示,井下长钻孔顺层分段水力压裂长度可达800 m,水压可达40 MPa,裂缝半径为40 m;地面垂直钻孔分段压裂深度可达3000 m,压裂段高>100 m,压力达80 MPa,裂缝半径为100~200 m;地面导斜钻孔水平顺层段长度达1000 m,压力达80 MPa,裂缝半径为100~150 m;压裂前后煤体应力或支架压力的检测数据对比显示,压裂后的应力较压裂前降低了10 MPa以上,满足区域治理的要求,钻孔远程水力压裂在防治冲击地压上较传统方法具有显著超前优势、区域优势、效率优势、安全优势和环保优势,可以做到冲击地压防治区段的无人化,满足区域先行、超前治理的国家要求。     

基于粒径分维值检验的松散介质渗透系数空间估值——以河北平原为例

为了克服松散含水介质非均质性各向异性对介质渗透系数的求取所带来的困难,以水动力条件为线索,利用互相关法寻找同一时代地层及同一时代地表水的主、次流方向.在主流方向上,建立了石家庄-束鹿-衡水段介质颗粒粒径随距离递变的数学模型,并以此为基础推求无钻孔地段的粒径.同时,运用分形理论,计算了中、上更新统地层主流方向平均粒径空间分布的分维值,并将其作为检验粒径估值正确与否的判据.通过不同岩性的渗透系数-深度模型,实现了用平均粒径预测渗透系数的全过程.     

岩体裂隙等效水力隙宽的统计确定方法

针对天然裂隙岩体等效水力隙宽确定的复杂性,利用平行板水流的立方定律及流量等效原理,推导出光滑平行板单裂隙的等效水力隙宽公式,同时对隙宽分布的频率特性进行了探讨,认为非均匀隙宽单裂隙的等效水力隙宽可近似取40%频率的隙宽,或取隙宽的几何平均值与调和平均值的算术平均值.     

VELOCITY–DISCHARGE RELATIONSHIPS DERIVED FROM DYE TRACER EXPERIMENTS IN GLACIAL MELTWATERS: IMPLICATIONS FOR SUBGLACIAL FLOW CONDITIONS

Repeated dye tracer tests were undertaken from individual moulins at Haut Glacier d'Arolla, Switzerland, over a number of diurnal discharge cycles during the summers of 1989–1991. It was hoped to use the concepts of at-a-station hydraulic geometry to infer flow conditions in subglacial channels from the form of the velocity–discharge relationships derived from these tests. The results, however, displayed both clockwise and anticlockwise velocity–discharge hysteresis, in addition to the simple power function relationship assumed in the hydraulic geometry approach. Clockwise hysteresis seems to indicate that a moulin drains into a small tributary channel rather than directly into an arterial channel, and that discharges in the two channels vary out of phase with each other. Anticlockwise hysteresis is accompanied by strong diurnal variations in the value of dispersivity derived from the dye breakthrough curve, and is best explained by hydraulic damming of moulins or sub/englacial passageways. Despite the complex velocity–discharge relationships observed, some indication of subglacial flow conditions may be obtained if tributary channels comprise only a small fraction of the drainage path and power function velocity–discharge relationships are derived from dye injections conducted during periods when the supraglacial discharge entering the moulin and the bulk discharge vary in phase. Analyses based on this premise suggest that both open and closed channel flow occur beneath Haut Glacier d'Arolla, and that flow conditions are highly variable at and between sites.     

北部湾单站海流旋转谱分析

本文对北部湾内一个连续7d的海流观测站的资料进行旋转谱分析。结果表明,该海区潮流属于不正规全日潮,全日周期分量的谱能量与半日周期分量的谱能量的比值为1.7。全日周期分量的椭圆主轴方向为341°,且椭圆主轴方向较稳定。整个流场基本上受顺时针旋转流所控制。总的趋势,在低频段海流的北分量自谱能量远比东分量自谱大。东分量谱相对北分量有一个较短的时间滞后,且北分量与东分量相关性较好。分析结果与以往对测站所在海区观测的潮流准调和分析结果相吻合。     

Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.     

多点液压式波浪能海水淡化系统建模与仿真

为缓解淡水资源短缺及化石能源过度使用问题,提出多点液压式波浪能海水淡化系统,该系统主要由采能装置、液压传递系统与反渗透膜海水淡化设备组成。系统的采能装置采用振荡浮子式,可将波浪能转换为浮子振荡从而被液压系统吸收达到采集波浪能的目的。为了提高液压式波浪能海水淡化系统的采能效率及淡水率,利用AMEsim软件对液压传递系统进行建模与仿真,分析了蓄能器、浮子个数及波高对液压传递系统输出响应的影响。结果表明:蓄能器能够使液压马达的输出响应更加稳定;当浮子的数量增加时,液压系统达到稳定的运行状态所需的时间更短,从而有利于提高系统的效率;波高在2 m左右时,本系统的产水量达到最大。     

深海液压主从式机械手控制器

深海主从式机械手控制器是一个比较复杂的系统,可靠性要求高.分析了美国Schilling机械手的特点,介绍了研制的一台6自由度的机械手控制器的硬件电路和软件算法.该控制器运行稳定.机械手动作精度、速度满足使用要求.     

南海北部陆坡海域内波谱特征

本文对1998年南海季风实验中定点观测的声学多普勒流速剖面仪（Acoustic Doppler Current Profiler,ADCP）海流数据进行频谱分析,结果表明南海北部地区内波之间的非线性作用的强弱影响着该海域的内波谱特征。在季节性温跃层（水深22m和58m）中,由于存在着强的非线性作用,内波带的谱斜率趋于σ^-1和σ^-2之间,而且较高能量的潮谐波频率的峰值随着频率呈现少见的一。递减。在季节性温跃层（水深130m）以下,内波非线性相互作用较弱,观测的内波带谱特征与标准Garrett-Munk内波谱相似,均显示了σ^-2的谱斜率。