Using a pore‐scale model to quantify the effect of particle re‐arrangement on pore structure and hydraulic properties

A pore‐scale model based on measured particle size distributions has been used to quantify the changes in pore space geometry of packed soil columns resulting from a dilution in electrolyte concentration from 500 to 1 mmol l^?1 NaCl during leaching. This was applied to examine the effects of particle release and re‐deposition on pore structure and hydraulic properties. Two different soils, an agricultural soil and a mining residue, were investigated with respect to the change in hydraulic properties. The mining residue was much more affected by this process with the water saturated hydraulic conductivity decreasing to 0·4% of the initial value and the air‐entry value changing from 20 to 50 cm. For agricultural soil, there was little detectable shift in the water retention curve but the saturated hydraulic conductivity decreased to 8·5% of the initial value. This was attributed to localized pore clogging (similar to a surface seal) affecting hydraulic conductivity, but not the microscopically measured pore‐size distribution or water retention. We modelled the soil structure at the pore scale to explain the different responses of the two soils to the experimental conditions. The size of the pores was determined as a function of deposited clay particles. The modal pore size of the agricultural soil as indicated by the constant water retention curve was 45 µm and was not affected by the leaching process. In the case of the mining residue, the mode changed from 75 to 45 µm. This reduction of pore size corresponds to an increase of capillary forces that is related to the measured shift of the water retention curve. Copyright © 2007 John Wiley & Sons, Ltd.     

Analytical solutions of linear finite‐ and small‐strain one‐dimensional consolidation

Analytical solutions are presented for linear finite‐strain one‐dimensional consolidation of initially unconsolidated soil layers with surcharge loading for both one‐ and two‐way drainage. These solutions complement earlier solutions for initially unconsolidated soil layers without surcharge and initially normally consolidated soil layers with surcharge. Small‐strain solutions for the consolidation of initially unconsolidated soil layers with surcharge loading are also presented, and the relationship between the earlier solutions for initially unconsolidated soil without surcharge and the corresponding small‐strain solutions, which was not addressed in the earlier work, is clarified. The new solutions for initially unconsolidated soil with surcharge loading can be applied to the analysis of low stress consolidation tests and to the partial validation of numerical solutions of non‐linear finite‐strain consolidation. They also clarify a formerly perplexing aspect of finite‐strain solution charts first noted in numerical solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

A general solution for tide‐induced groundwater fluctuation in an estuarine‐coastal confined and unconfined aquifer system

This paper presents an analytical solution to tide‐induced head fluctuations in a two‐dimensional estuarine‐coastal aquifer system that consists of an unconfined aquifer and a heterogeneous confined aquifer extending under a tidal river with a semipermeable layer between them. This study considers the joint effects of tidal‐river leakage, inland leakage, dimensionless transmissivity between the tidal‐river and inland confined aquifer, and transmissivity anisotropic ratios. The analytical solution for this model is obtained via the separation of variables method. Three existing solutions related to head fluctuation in one‐ or two‐dimensional leaky confined aquifers are considered as special cases in the present solution. This study shows that there is a threshold of tidal‐river confined aquifer length. When the tidal‐river length is greater than the threshold length, the inland head fluctuations remain sensitive to the leakage effect but become insensitive to the tidal‐river width and dimensionless transmissivity. Considering leakage and transmissivity anisotropy, this study also demonstrates that at a location farther from the river–inland boundary, head fluctuations increase with increasing leakage and transmissivity anisotropy; the maximum head fluctuation occurs when leakage and transmissivity anisotropy are both at their maximum values. The combined action of the 3 effects of loading, tidal‐river aquifer leakage, and inland aquifer leakage differs significantly according to various aquifer parameters. The analytical solution in this paper can be applied to demonstrate the behaviours of the head fluctuations of an estuarine‐coastal aquifer system, and the head fluctuations can be clearly described when the tidal and hydrogeological parameters are derived from field measurement data or hypothetical cases.     

煤炭TK-3型液压钻机回转器技术改造研究

根据TK-3型液压立轴式岩心钻机结构分析产生液压卡盘失灵、主动钻杆卡死等故障的原因．提出了两套改造方案。通过车间空载试车及野外现场钻进验证，改进方案可行，完全符合煤炭地质钻探金刚石钻进、绳索取心技术工艺要求。     

一维稳态入渗时非饱和土基质吸力分布

雨水的入渗和蒸发对土体的其质吸力分布有着重要的影响作用。利用水相连续性条件、广义Darcy定律及Gardner关于非饱和土导水系数和基质吸力的经验公式,建立并求解出非饱和土一维稳态渗流情况下基质吸力沿深度变化的关系表达式。根据所解得的解析解,详细分析了在单一土层情况下参数α、入渗强度q和qlks对基质吸力分布的影响。     

关于抗浮设防水位及浮力计算问题的分析讨论

参阅了近10年来国内11篇文献和2本专著中有关抗浮问题和地下水渗流问题的论述,对抗浮设防水位的确定和浮力的计算问题提出看法和建议。     

A field application for lime stabilization

This study presents the improvements achieved as a result of the lime stabilization application conducted by the joint effort of the Turkish Association of Lime Industrialists and the General Directorate of Rural Services on the 200 m long section of the Ankara Province Yukar? Yurtçu Village road where green and brown clays are dominant. The study also numerically demonstrates the impacts of these improvements on the road section based on the results of various laboratory and field tests. The lime stabilization in field conditions was performed with 5% lime for both clays and was applied as a 30 cm thick single layer. In the soaked California bearing-ratio (CBR) tests conducted in the laboratory, increases that reach up from 16 and 21 times compared to initial soaked CBR values were observed in green and brown clays, respectively, at the end of 28 days. The high increases observed in soaked CBR values would reduce the upper layer thickness of the roads. The similar improvements are also achieved in unconfined compression and plate loading tests. The comparisons performed with the plate loading tests clearly demonstrated the behavior of the surface to lime and its cure impact.     

Fluid pressure and hydraulic fracturing in hydrothermal ore formation at gold deposits

The active role of fluids in the formation of ore-localizing structures expressed in dilatancy and hydraulic fracturing is suggested from the results of detailed comprehensive study of the Tokur gold deposit in the Upper Amur region, Russia, and the surveying of the published data on fluid pressure that characterizes formation of other hydrothermal deposits different in depth, morphology of orebodies, and their localization with respect to rocks of various permeability. Development conditions and possible implications of hydraulic fracturing for ore formation are considered. Indications of involvement of this mechanism in the orebody formation at the Pokrovsky, Berezovsky, and Nezhdaninsky gold deposits in Russia and the Bendigo deposit in Australia are discussed.     

Integration of Tracer Test Data to Refine Geostatistical Hydraulic Conductivity Fields Using Sequential Self-Calibration Method

On the basis of local measurements of hydraulic conductivity,geostatistical methods have been found to be useful in heterogeneity characterization of a hydraulic conductivity field on a regional scale. However,the methods are not suited to directly integrate dynamic production data,such as,hydraulic head and solute concentration,into the study of conductivity distribution. These data,which record the flow and transport processes in the medium,are closely related to the spatial distribution of hydraulic conductivity. In this study,a three-dimensional gradient-based inverse method-the sequential self-calibration (SSC) method-is developed to calibrate a hydraulic conductivity field,initially generated by a geostatistical simulation method,conditioned on tracer test results. The SSC method can honor both local hydraulic conductivity measurements and tracer test data. The mismatch between the simulated hydraulic conductivity field and the reference true one,measured by its mean square error (MSE),is reduced through the SSC conditional study. In comparison with the unconditional results,the SSC conditional study creates the mean breakthrough curve much closer to the reference true curve,and significantly reduces the prediction uncertainty of the solute transport in the observed locations. Further,the reduction of uncertainty is spatially dependent,which indicates that good locations,geological structure,and boundary conditions will affect the efficiency of the SSC study results.     

XD-3型全液压动力头式岩心钻机的研制与应用

根据我国地质钻探任务不断增加和向地层深部找矿的需求,研制了XD-3型全液压动力头式岩心钻机。介绍了该钻机的结构设计、工作原理、主要特点以及使用情况。