液压阻尼系统（HDS）控制立式钢制储罐地震响应分析

本文采用液压阻尼系统（HDS）控制立式圆柱钢制储罐的地震反应，建立了安装HDS储罐的力学分析模型，并进行了数值计算，从频域对安装HDS后储罐的地震响应进行了分析，研究了HDS的减震效果和HDS和HDS参数对储罐地震反应的影响。     

钦州湾水下动力地貌特征

钦州湾水下动力地貌主要有潮间浅滩、河口沙坝、潮沟、潮流沙脊、潮流冲刷深槽、水下拦门浅滩、水下斜坡。该文阐述钦州湾的入海河流、潮汐、潮流、波浪等水动力的基本特征 ,分析水下地貌类型的形成及其空间分布和沉积物组成 ,并探讨动力地貌形成原因与机理及海岸动态变化趋势。     

Improvement of calcareous expansive soils in semi-arid environments

The semi-arid climate and geology of Cyprus have caused the formation of calcareous expansive soils on the island. In some areas, swelling has caused serious foundation problems. The industrial by-product Soma fly ash has been used to improve the engineering properties of the soil. Fly ash treatment has shown tremendous potential as an economical method for the stabilization of the soil. Significant reduction in the swell potential and an increase in the hydraulic conductivity values are obtained. Use of fly ash with a small percentage of lime produces even more dramatic results. Cation exchange capacity (CEC) values substantiate the formation of the new pozzolanic reaction minerals which result in more stable silt-sand like structures.     

非饱和土壤水力参数预测的分形模型

综述了利用分形几何理论,可在土壤水力性质,包括土壤水分特征曲线及水力传导系数与土壤结构分维之间建立起一定的函数关系式.这些函数关系式大多与Campbell定律具有相同或相似的幂定律形式,一方面揭示了Campbell定律的物理实质,另一方面可用于土壤持水量及水力传导系数的预测.     

Cyclic strength and deformation of crushable carbonate sand

Cyclic triaxial tests have been carried out on a skeletal carbonate sand from the west coast of Eire. Results are presented for undrained cyclic shear tests on samples with 80% of relative density consolidated under both isotropic and anisotropic conditions. Failure was defined as a 5% double amplitude cyclic strain and a 5% peak axial strain for stress-reversal and non-reversal stress conditions, respectively. Using this definition the cyclic strength for isotropically consolidated samples was affected by the confining pressure although the angular platey nature of the sand resulted in higher cyclic strengths than for a comparable silica sand. For anisotropically consolidated samples the cyclic strength increased with increasing initial static shear stress while on the other hand the cyclic strength normalised in the usual way with respect to the initial confining pressure decreased as this pressure increased.     

Estimation of periodicities in hydrologic data

Periodicites in hydrologic data are frequently estimated and studied. In some cases the periodic components are subtracted from the data to obtain the stochastic components. In other cases the physical reasons for the occurrence of these periodicities are investigated. Apart from the annual cycle in the hydrologic data, periods corresponding to the 11 year sunspot cycle, the Hale cycle and others have been detected.The conclusions from most of these studies depend on the reliability and robustness of the methods used to detect these periodicities. Several spectral analysis methods have been proposed to investigate periodicities in time series data. Several of these have been compared to each other. The methods by Siddiqui and Wang and by Damsleth and Spjotvoll, which are stepwise procedures of spectrum estimation, have not been evaluated.     

Spatial averaging of hydraulic conductivity in three-dimensional heterogeneous porous media

Numerical models of groundwater flow require the assignment of hydraulic conductivities to large grid blocks discretizing the flow domain; however, conductivity data is usually available only at the much smaller scale of core samples. This paper describes a geostatistical model for hydraulic conductivity at both the core or point scale and that of grid blocks. Conductivity at the block scale is obtained empirically as a spatial power-average of point scale values. Assuming a multivariate Gaussian model for point log-conductivity, expressions are derived for the ensemble mean and variance of block conductivity. The expression for the ensemble mean of block scale conductivity is found to be similar to an expression for the ensemble effective conductivity of an infinite field derived analytically by earlier authors. Here, block conductivities obtained by power averaging are compared with effective conductivities obtained from a numerical flow model and are found to be in excellent agreement for a suitably chosen averaging exponent. This agreement deteriorates gradually as the log variance of conductivity increases beyond 2. For arbitrary flow field geometry and anisotropic conductivity covariances, the averaging exponent can be calibrated by recourse to numerical flow experiments. For cubic fields and an isotropic spatial covariance, the averaging exponent is found to be 1/3. In this particular case, it was found that flow field discretization at the block scale through local averaging of point conductivities gave similar results to those obtained directly using a point scale discretization of the flow field.     

A comparative study of closed-form hydraulic conductivity prediction models

The Mualem and the Burdine hydraulic conductivity prediction models are considered in combination with the van Genuchten analytical retention curve, as well as the Brooks and Corey prediction model. An equivalence is presented between the retention curves of these models. A comparative study follows between hydraulic conductivities that are based on equivalent retention curves. A unified presentation of prediction models provides a framework for the whole analysis. The treatment of the equivalence problem consists in a minimization procedure characterized by uncoupling of the parameters and analytical evaluation of the objective function. Exact analytical equivalence relations are given for significant parts of the parameter ranges, and, for the remaining parts, analytical approximations are proposed. The comparisons between hydraulic conductivities are carried out via an inequality analysis. It is shown that the hydraulic conductivity of the Burdine model is less than that of the other models for extended ranges of equivalent parameters.     

Effects of groundwater flow on mineral diagenesis, with emphasis on carbonate aquifers

 This article provides a critical synopsis of the effects of groundwater flow on mineral diagenesis. Emphasis is placed on those aspects and processes that change porosity and permeability in carbonate aquifers, because they are of particular importance to human societies as sources of supplies of water for human consumption (drinking, irrigation) and of crude oil and natural gas. Diagenetic settings in carbonates as well as clastics are generally ill defined. This paper proposes a new comprehensive classification of diagenetic settings into near-surface, shallow-, intermediate-, and deep-burial diagenetic settings; hydrocarbon-contaminated plumes; and fractures. These settings are defined on the basis of mineralogy, petroleum, hydrogeochemistry, and hydrogeology. This classification is applicable to all sedimentary basins. Diagenesis is governed by various intrinsic and extrinsic factors that include thermodynamic and kinetic constraints, as well as microstructural factors that may override the others. These factors govern diagenetic processes, such as dissolution, compaction, recrystallization, replacement, and sulfate–hydrocarbon redox-reactions. Processes such as cementation, dissolution, and dolomitization require significant flow of groundwater driven by an externally imposed hydraulic gradient. Other processes, such as stylolitization and thermochemical sulfate reduction, commonly take place without significant groundwater flow in hydrologically nearly or completely stagnant systems that are geochemically "closed." Two major effects of groundwater flow on mineral diagenesis are enhancement and reduction of porosity and permeability, although groundwater flow can also leave these rock properties essentially unchanged. In extreme cases, an aquifer or hydrocarbon reservoir rock can have highly enhanced porosity and permeability due to extensive mineral dissolution, or it can be plugged up due to extensive mineral precipitation. Received, April 1998 · Revised, July 1998 · Accepted, September 1998     

Quantifying the relative impact of hydrological and hydraulic modelling parameterizations on uncertainty of inundation maps

ABSTRACT

Flood risk management strongly relies on inundation models for river basin zoning in flood-prone and risk-free areas. Floodplain zoning is significantly affected by the diverse and concurrent uncertainties that characterize the modelling chain used for producing inundation maps. In order to quantify the relative impact of the uncertainties linked to a lumped hydrological (rainfall–runoff) model and a FLO-2D hydraulic model, a Monte Carlo procedure is proposed in this work. The hydrological uncertainty is associated with the design rainfall estimation method, while the hydraulic model uncertainty is associated with roughness parameterization. This uncertainty analysis is tested on the case study of the Marta coastal catchment in Italy, by comparing the different frequency, extent and depth of inundation simulations associated with varying rainfall forcing and/or hydraulic model roughness realizations. The results suggest a significant predominance of the hydrological uncertainty with respect to the hydraulic one on the overall uncertainty associated with the simulated inundation maps.