岩石在动载作用下的破坏与强度

研究岩石的动载性能,在凿岩爆破上有重要意义。分段式霍布金生杆已应用于研究岩石对波动载荷的效应。作者使用改型的霍布金生杆法对岩石试件在动载下的破坏强度作了试验研究。冲击试验台配合微处理机作高速数据显示与处理,借助应力波在弹性杆中的一维理论对数据进行解释。测定了多种岩石静载与动载的强度,并对岩石试件尺寸及加载速率的影响也作了试验。     

循环荷载特征对焊接工字形钢支撑低周疲劳性能的影响

通过14根铰支焊接工字形支撑在不同特征的循环轴向位移荷载下的低周疲劳试验，研究了循环轴向位移荷载的位移幅值、平均位移幅值及加载次序等因素对钢支撑低周疲劳及耗能性能的影响。研究发现，对称循环荷载中幅值越小，支撑翼缘局部屈曲发展越晚，其耗能及承载力退化也越平缓。文中提出了支撑在幅值6δ≤Δδ≤12δy的对称循环荷载下的疲劳寿命经验公式。试验表明，循环荷载的位移幅值是支撑疲劳损伤及耗能退化的最主要影响因素，过载峰效应及适当的平均压位移幅值改善了钢支撑低周疲劳及耗能性能。     

从水流挟沙力和河槽形态规律分析黄河调水调沙

在分析水流挟沙力和河槽水力形态规律的基础上，研究调节流量、含沙量和泥沙组成的优化组合，解决河道输沙减淤和河槽相对稳定问题，提出调水调沙方向。达到合理利用水资源和河道减淤与治理相结合的目的．     

国家大剧院深基坑地下水控制设计及施工技术

国家大剧院基坑地下水控制是大剧院工程的三大难题之一,也是专家们讨论的焦点。经过水文地质试验和充分论证,确定了地下水控制方案和施工方法,即采用反循环成井工艺施工引渗井,将上层滞水和潜水引渗到第一层承压含水层中消纳,保证第一步基坑开挖至-15 7m;在-15 7m位置采用连续墙阻隔第一层承压水,并使用旋挖钻机在槽内施工降水井,疏干槽内承压含水层并进行越流补给控制,保证基坑开挖至-26m;在歌剧院台仓局部加深部份(-32 5m),采用封闭布设减压井,解决基坑开挖和台仓地下结构施工时基坑突涌的问题;最后采用特殊的封井技术,将井管内高于槽底约10m的承压水头封堵在槽底以下0 5m,安全截断井管,保证了基础施工。     

论"单位涌水量就是导水系数"

单位涌水量是井抽水水位降深换算为1 m时的单井出水量;导水系数是含水层宽度为1 m时,地下水水力坡度为1时的单宽流量.二者之间从定义上看毫无关系,但它们的单位(m3/d·m)(m2/d)是相同的.笔者经过多年探讨和初步试验后发现,单位涌水量就是管井抽水所利用含水层的导水系数.     

Numerical simulation of groundwater flowing to horizontal seepage wells under a river

A horizontal seepage well, consisting of an interconnected vertical well, galleries, chambers and small-diameter radiating bores, is used to acquire relatively clean water that has been filtered through natural alluvial deposits in a riverbed. It has wide application, especially in arid and semi-arid areas. The lack of calculation formulae or models for horizontal seepage wells, up until now, has resulted in several false applications. Based on the analysis of groundwater flow characteristics, it has been concluded that several flow regimes coexist and hydraulic head loss exists in the horizontal seepage well. To avoid the difficulty of confirming the flux or head distribution in such a complex system, the model boundary of the whole horizontal seepage well has been moved to that of just the vertical well, and the well-aquifer system was treated as a heterogeneous medium, where the horizontal seepage well itself is a highly permeability medium. A mathematical model has been developed, based on the coupled seepage-pipe flow, by the introduction of equivalent hydraulic conductivity according to different flow regimes. Then a three-dimensional finite difference numerical model, based on the mathematical model, was developed and applied to a horizontal seepage well in China. The numerical model verified the groundwater flow characteristics of the horizontal seepage well. An erratum to this article can be found at     

Determination of vertical displacements over the coastal area of Korea due to the ocean tide loading using GPS observations

This paper describes the GPS applicability for detecting the vertical displacements of ground stations caused by ocean tide loading effects. An experiment was carried out using 12 permanent GPS stations located in the coastal area of Korea using data in the period 1 July until 26 August 2003. The relative height differences were calculated from hourly DGPS data processing based on the carrier-phase observation. The power spectra of the M₂ and N₂ constituents of ocean tide loading were derived using the CLEAN algorithm. The differential vertical displacements generated by the ocean tide loading effect are typically 3–25 mm in coastal area of the Korea. We compared the results from GPS with those of the ocean tide models, NAO.99Jb regional model and GOT00.2, FES99 global models. The M₂ (N₂) amplitude differences of vertical displacements between GPS and GOT00.2 is 1.22 ± 3.61 mm (1.01 ± 1.48 mm), and that of the M₂ (N₂) amplitude difference between GPS and FES99 is 0.04 ± 4.64 mm (0.64 ± 1.75 mm), whereas the M₂ (N₂) amplitude difference between GPS and NAO.99Jb are 0.05 ± 1.03 mm (0.86 ± 1.18 mm). The highest vertical displacements at the PALM station are found for 24.5 ± 0.7 mm from GPS observation, and 22.9 mm from the regional model NAO.99Jb and 13.17 and 10.00 mm from the global models GOT00.2 and FES99, respectively. These values show that the vertical displacements derived from GPS are in good agreement with those of the regional model NAO.99Jb around Korea, more than with the global models. This result indicated that GPS is an effective tool to measure the vertical displacement caused by the ocean tide loading effect in the coastal area, and we need to use the NAO.99Jb ocean tide model rather than the global ocean tide models in and around the Korean peninsula for position determination with permanent GPS installations. This work demonstrates that vertical displacement caused by the M₂ and N₂ constituents of ocean tide loading can be measured by carrier-phase DGPS.     

EFFECTS OF RIVER NETWORK WORKS AND SOIL CONSERVATION MEASURES ON RESERVOIR SILTATION

Knowledge of the morphological dynamics of a water course is essential for management of reservoir siltation. With an example of sedimentation in a reservoir in Basilicata, Italy, this paper demonstrates the effect on reservoir siltation of the hydraulic works, which are aimed to reduce sediment transport along the fluvial network and to prevent part of the sediment discharge from reaching the lake. The effect depends on the river type and on the the geological features of river basin slopes. The paper also shows how mass erosion can significantly contribute to development of reservoir siltation. Finally, preliminary results are provided about the time needed for river training works to be effective.     

液压阻尼系统（HDS）控制立式钢制储罐地震响应分析

本文采用液压阻尼系统（HDS）控制立式圆柱钢制储罐的地震反应，建立了安装HDS储罐的力学分析模型，并进行了数值计算，从频域对安装HDS后储罐的地震响应进行了分析，研究了HDS的减震效果和HDS和HDS参数对储罐地震反应的影响。     

钦州湾水下动力地貌特征

钦州湾水下动力地貌主要有潮间浅滩、河口沙坝、潮沟、潮流沙脊、潮流冲刷深槽、水下拦门浅滩、水下斜坡。该文阐述钦州湾的入海河流、潮汐、潮流、波浪等水动力的基本特征 ,分析水下地貌类型的形成及其空间分布和沉积物组成 ,并探讨动力地貌形成原因与机理及海岸动态变化趋势。