基于微地震技术的油田裂缝监测及模拟

研制了1套以三分量MEMS检波器为核心硬件的微地震监测系统,并结合GPS系统对监测过程进行精确授时.同时编制数据化记录和处理软件,实现网络化自动监测功能;通过开发计算机判别标准和实时定位理论系统,对数据和微震源进行自动化处理和计算.利用该系统对东辛油田营11进行了6个月现场注水微震监测,对监测数据的处理表明营11注水区域裂缝发育方向基本上为NE90°-NE125°,与地应力裂缝模拟结果相符较好,两者结合给出了这个地区合理开发部署建议.     

北黄海盆地北缘断裂带及其特征

根据最新调查获得的北黄海盆地海洋重力、海洋与航空磁力和多道地震资料,结合以往周边地区的资料,编制了北黄海空间重力异常图、布格重力异常图、磁力异常图。在重磁基础图件的基础上,通过解析延拓、任意方向导数计算、离散小波变换等处理,结合地震和地质资料,对北黄海北缘断裂带进行了综合分析。确定了北黄海北缘断裂带的存在,并对该断裂带的延伸长度、切割深度和性质进行了分析,指出北黄海北缘断裂带是辽东隆起与北黄海盆地的界线,断裂带两侧具有明显不同的地球物理场特征;而且断裂带具有多期活动的特点,对北黄海盆地的形成演化具有重要的控制作用。     

枯竭型油气藏储气库射孔完井技术

枯竭型油气藏储气库一般采用套管射孔完井方式,注、采气需要“缓进大出”,要求储层与井筒良好沟通.针对枯竭型油气藏储气库射孔完井工艺复杂、要求高、地层保护难度大等特点,阐述了射孔方式及工艺优选、射孔参数优化、射孔压实带改造技术、多级负压起爆技术等内容.该项射孔完井技术在中石化文96储气库13口井成功应用,取得了良好的效果.     

Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.     

多点液压式波浪能海水淡化系统建模与仿真

为缓解淡水资源短缺及化石能源过度使用问题,提出多点液压式波浪能海水淡化系统,该系统主要由采能装置、液压传递系统与反渗透膜海水淡化设备组成。系统的采能装置采用振荡浮子式,可将波浪能转换为浮子振荡从而被液压系统吸收达到采集波浪能的目的。为了提高液压式波浪能海水淡化系统的采能效率及淡水率,利用AMEsim软件对液压传递系统进行建模与仿真,分析了蓄能器、浮子个数及波高对液压传递系统输出响应的影响。结果表明:蓄能器能够使液压马达的输出响应更加稳定;当浮子的数量增加时,液压系统达到稳定的运行状态所需的时间更短,从而有利于提高系统的效率;波高在2 m左右时,本系统的产水量达到最大。     

断裂和裂缝的分形特征

在详细剖析断裂和裂缝组成和结构相似性的基础上, 计算了贝尔断陷T₅和T₂两层构造图上断裂信息维和10口井布达特群岩心裂缝信息维, 分析了影响断裂和裂缝信息维的因素, 达到了从断裂信息维去预测裂缝分布的目的.影响断裂和裂缝信息维的因素包括密度、延伸长度、断层性质以及岩性, 但从根本上讲断层性质及岩性对信息维影响体现在断裂的密度上, 因此信息维应该是断裂发育程度的度量, 利用断裂信息维与裂缝信息维关系、裂缝信息维与裂缝密度关系预测裂缝的分布, 有利的裂缝发育带有3个区域, 与现今见油气井分布吻合.      

基于粒径分维值检验的松散介质渗透系数空间估值——以河北平原为例

为了克服松散含水介质非均质性各向异性对介质渗透系数的求取所带来的困难,以水动力条件为线索,利用互相关法寻找同一时代地层及同一时代地表水的主、次流方向.在主流方向上,建立了石家庄-束鹿-衡水段介质颗粒粒径随距离递变的数学模型,并以此为基础推求无钻孔地段的粒径.同时,运用分形理论,计算了中、上更新统地层主流方向平均粒径空间分布的分维值,并将其作为检验粒径估值正确与否的判据.通过不同岩性的渗透系数-深度模型,实现了用平均粒径预测渗透系数的全过程.     

岩体裂隙等效水力隙宽的统计确定方法

针对天然裂隙岩体等效水力隙宽确定的复杂性,利用平行板水流的立方定律及流量等效原理,推导出光滑平行板单裂隙的等效水力隙宽公式,同时对隙宽分布的频率特性进行了探讨,认为非均匀隙宽单裂隙的等效水力隙宽可近似取40%频率的隙宽,或取隙宽的几何平均值与调和平均值的算术平均值.     

In situ stress field of eastern Australia

New in situ data based on hydraulic fracturing and overcoring have been compiled for eastern Australia, increasing from 23 to 110 the number of in situ stress analyses available for the area between and including the Bowen and Sydney Basins. The Bowen Basin displays a consistent north‐northeast maximum horizontal stress (σ_H) orientation over some 500 km. Stress orientations in the Sydney Basin are more variable than in the Bowen Basin, with areas of the Sydney Basin exhibiting north‐northeast, northeast, east‐west and bimodal σ_H orientations. Most new data indicate that the overburden stress (σ_V) is the minimum principal stress in both the Bowen and Sydney Basins. The Sydney Basin is relatively seismically active, whereas the Bowen Basin is relatively aseismic. Despite the fact that in situ stress measurements sample the stress field at shallower depth than the seismogenic zone, there is a correlation between the stress measurements and seismicity in the two areas. Mohr‐Coulomb analysis of the propensity for failure in the Sydney Basin suggests 41% of the new in situ stress data are indicative of failure, as opposed to 13% in the Bowen Basin. The multiple pre‐existing structural grains in the Sydney Basin further emphasise the difference between propensity for failure in the two areas. Previous modelling of intraplate stresses due to plate boundary forces has been less successful at predicting stress orientations in eastern than in western and central Australia. Nonetheless, stress orientation in the Bowen Basin is consistent with that predicted by modelling of stresses due to plate boundary forces. Variable stress orientations in the Sydney Basin suggest that more local sources of stress, such as those associated with the continental margin and with local structure, significantly influence stress orientation. The effect of local sources of stress may be relatively pronounced because stresses due to plate boundary forces result in low horizontal stress anisotropy in the Sydney Basin.     

Modeling 3D thermal fracture propagation by transient cooling using virtual multidimensional internal bonds

Thermal fracturing can play an important role in development of unconventional petroleum and geothermal resources. Thermal fractures can result from the nonlinear deformation of the rock in response to thermal stress related to cold water injection as well as heating. Before the rock reaches the final failure stage, material softening and bulk modulus degradation can cause changes in the thermo‐mechanical properties of the solid. In order to capture this aspect of the rock fracture, a virtual multidimensional internal bond‐based thermo‐mechanical model is derived to track elastic, softening, and the failure stages of the rock in response to the temporal changes of its temperature field. The variations in thermo‐mechanical properties of the rock are derived from a nonlinear constitutive model. To represent the thermo‐mechanical behavior of pre‐existing fractures, the element partition method is employed. Using the model, numerical simulation of 3D thermal fracture propagation in brittle rock is carried out. Results of numerical simulations provide evidence of model verification and illustrate nonlinear thermal response and fracture development in rock under uniform cooling. In addition, fracture coalescence in a cluster of fractures under thermal stress is illustrated, and the process of thermal fracturing from a wellbore is captured. Results underscore the importance of thermal stress in reservoir stimulation and show the effectiveness of the model to predict 3D thermal fracturing. Copyright © 2016 John Wiley & Sons, Ltd.