蚕庄金矿上庄矿区控矿构造特征及构造模拟

上庄矿区的主要控矿断裂具有多期活动的特点，主断裂、次级断裂及节理的多种组合方式控制了矿体的产出。运用断裂面波形模拟方法得出了控矿主断裂在成矿期的断裂面波形图，并以此对上庄矿区的深部矿体进行了预测。     

伊宁吐拉苏火山盆地金矿成矿构造系统与远景评估

吐拉苏火山盆地金矿成矿构造系统由2种类型的成矿构造组成，一种是火山机构中的高角度塌陷式断裂；另一种是爆发．沉积相中的低角度水压式断裂．阿希金矿受控于弧形塌陷式断裂，其北东段坍塌强度大于南东段，最大张裂空间控制的矿体群向NE侧伏．阿希火山机构东侧的阿恰勒河组下可能隐伏着与西侧对应的高角度弧形塌陷式成矿断裂．爆发．沉积相中硅化岩型金矿受控于水压式断裂，不透水凝灰岩层圈闭富水粗火山碎屑岩层，组成压力仓构造并发生水力压裂作用．由水力压裂作用形成的层控水压式成矿断裂出现的几率，远大于后期由非成矿断裂切割抬升它们出现的几率．构造解析表明吐拉苏火山盆地2类成矿构造控制的金矿具有巨大的地质找矿潜力．     

矿山工程裂隙破碎带的三维地震模式识别原理及应用效果

本文从时间域、频率域、三维空间域介绍了矿山工程裂隙破碎带主要的地震运动学、动力学属性参数,包括相对振幅、波峰相位时间、相似系数、主频带能量、三维空间时间梯度和相干系数等,提出了矿山工程裂隙破碎带三维地震属性的去噪平滑、归一化、相关分析、特征变换的处理方法以及裂隙破碎带的模式识别原理与方法,并用实例说明了该方法的应用效果。结果表明:模式识别法对于解释矿山工程的裂隙破碎带是有效的,并具有广阔的应用前景。     

土壤水力性质确定方法研究进展

介绍了确定土壤水力性质的各种直接方法(包括实验室方法和田间方法两大类)和间接方法如土壤转换函数方法、分形方法、形态学方法、数值反演方法和经验公式法等的研究进展和现状,指出了它们各自的优点和存在的不足.认为要不断地引入新的实验技术和改进测定设备,并把估计土壤水力性质的各种理论方法及实验信息有机地结合起来进行综合研究,以扩大它们的适用范围和提高预测精度.     

山西高平地震

阐述了发生在山西高平的地震和对高平有影响的地震，分析了高平市的地震灾害，通过分析得出高平地震与晋获断裂带活动有关的结论。     

岩体三维不连续裂隙网络及其逆建模方法

通过拟合实测的二维裂隙编录图和钻孔裂隙编录图，优化裂隙三维大小和密度参数，使模型能够准确再现野外所观测到的实际现象，包括开挖面和钻孔上不同裂隙的数量、密度和长度，通过计算实例验证了方法的可行性。     

Flow and fracture maps for basaltic rock deformation at high temperatures

Understanding how the strength of basaltic rock varies with the extrinsic conditions of stress state, pressure and temperature, and the intrinsic rock physical properties is fundamental to understanding the dynamics of volcanic systems. In particular it is essential to understand how rock strength at high temperatures is limited by fracture. We have collated and analysed laboratory data for basaltic rocks from over 500 rock deformation experiments and plotted these on principal stress failure maps. We have fitted an empirical flow law (Norton’s law) and a theoretical fracture criterion to these data. The principal stress failure map is a graphical representation of ductile and brittle experimental data together with flow and fracture envelopes under varying strain rate, temperature and pressure. We have used these maps to re-interpret the ductile–brittle transition in basaltic rocks at high temperatures and show, conceptually, how these failure maps can be applied to volcanic systems, using lava flows as an example.     

压裂井经济分析的优化方法

水力压裂是油气井增产的一项重要技术措施。压裂效果的经济评价，实际上是一个压裂设计的优化过程。研究经济问题即为研究压裂优化问题。提出了压裂井的施工费用计算方法和贴现率、净收入、净现值的计算公式，并对压裂井进行了经济分析，给出了压裂设计优化的步骤。建立了八屋—后五家户气田压裂经济评价模型，并应用到实际施工现场。使油气单井产量比过去增加2～3倍。     

Investigation of spatially distributed braided river flows using a two‐dimensional hydraulic model

This paper reports the application of a two‐dimensional hydraulic model to a braided reach of the Avoca River, New Zealand. Field measurements of water surface elevation, depth and velocity obtained at low flow were used to validate the model and to optimize the parameterization of bed friction. The main systematic trends in the measured flow variables are reproduced by the model. However, field data are characterized by greater spatial variability than model output reflecting differences in the scale of processes measured in the field and represented by the model. Additional model runs were conducted to simulate flow patterns within the study reach at five higher discharges. The purpose of these simulations was to evaluate the potential for using two‐dimensional hydraulic models to quantify the reach‐scale hydraulic characteristics of braided rivers and their dependence on discharge. Changes in flow depth and velocity with increasing discharge exhibit trends that are consistent with the results of previous field investigations, although the tendency for the wetted area of the braidplain within particular depth and velocity categories to remain fixed as discharge rises, as has been noted for several braided rivers in New Zealand, was not observed. Modelled shear stress frequency distributions fit gamma functions that incorporate a distribution shape parameter, the value of which follows clear systematic trends with rising discharge. These results illustrate both the problems of, and potential for, using two‐dimensional hydraulic models in braided river applications. This leads to something of a paradox in that while such models provide a means of generating hydraulic information that would be difficult to obtain in the field at an equivalent spatial resolution, they are, due to the problems inherent to data collection, difficult to validate conclusively. Despite this limitation, the application of spatially distributed models to investigate relationships between discharge and reach‐scale form and process variables appears to have considerable potential. Copyright © 2003 John Wiley & Sons, Ltd.     

CT长骨测量在骨折髓内钉固定术中的应用

目的：探讨CT在长骨测量中的应用价值.方法：经X线检查证实的肱骨、股骨、胫骨骨折患者600多例，其中302例临床行髓内钉固定术，并在术前进行了健侧骨的CT定位扫描，测量其两点之间骨干长度及骨髓腔最窄处的宽度。结果 依据术前CT定位测量数据而选择的髓内钉在手术中完全适用。结论：此方法操作简便测量数据准确为临床提供可靠依据。