枯竭型油气藏储气库射孔完井技术

枯竭型油气藏储气库一般采用套管射孔完井方式,注、采气需要“缓进大出”,要求储层与井筒良好沟通.针对枯竭型油气藏储气库射孔完井工艺复杂、要求高、地层保护难度大等特点,阐述了射孔方式及工艺优选、射孔参数优化、射孔压实带改造技术、多级负压起爆技术等内容.该项射孔完井技术在中石化文96储气库13口井成功应用,取得了良好的效果.     

多点液压式波浪能海水淡化系统建模与仿真

为缓解淡水资源短缺及化石能源过度使用问题,提出多点液压式波浪能海水淡化系统,该系统主要由采能装置、液压传递系统与反渗透膜海水淡化设备组成。系统的采能装置采用振荡浮子式,可将波浪能转换为浮子振荡从而被液压系统吸收达到采集波浪能的目的。为了提高液压式波浪能海水淡化系统的采能效率及淡水率,利用AMEsim软件对液压传递系统进行建模与仿真,分析了蓄能器、浮子个数及波高对液压传递系统输出响应的影响。结果表明:蓄能器能够使液压马达的输出响应更加稳定;当浮子的数量增加时,液压系统达到稳定的运行状态所需的时间更短,从而有利于提高系统的效率;波高在2 m左右时,本系统的产水量达到最大。     

浙江省台州-昌化深部构造特征探测

采用高分辨折射和宽角反射/折射综合地震探测方法,在浙江省中部沿黄岩、临海、东阳、桐庐、昌化进行深部构造探测,获得一条长约350km的速度结构剖面。探测结果表明,地壳结构具有明显的多层性,存在3个速度间断面;基底速度结构图像揭示了速度结构的横向非均匀性,这种不均匀性既对应于地质构造单元的分界线或断裂构造带,也反映出东西部构造特征的差异性。     

On the energy dissipation of jacket type offshore platforms with different pile–leg interactions

In recent years, considerable amount of effort has been made to design earthquake resistant offshore structures in seismic active areas. In order to achieve this objective, all components of a typical structure should function properly to dissipate seismically-induced energy within the members. Among components of an offshore installation, braces are of significant importance as they contribute substantially to total energy dissipation of the structure. Buckling in compression and yielding in tension assist the process of energy absorption. Nevertheless, the functionality of braces is dependent upon their joints where joint-cans are included to avoid any brittle fracture and unpredicted failure mechanisms.In this paper, special attention is being paid to energy dissipation of jacket type offshore platforms with two different pile–leg interactions. A case study representing an offshore platform is studied both analytically and experimentally. Analytical models are validated step by step based on available experimental tests and observations on individual members. Several parameters such as cyclic behavior, maximum bearing load and most importantly energy dissipation of two different 2D frames are investigated. Results provide promising insights into design and fabrication of fixed platforms with different pile–leg interactions.     

深海液压主从式机械手控制器

深海主从式机械手控制器是一个比较复杂的系统,可靠性要求高.分析了美国Schilling机械手的特点,介绍了研制的一台6自由度的机械手控制器的硬件电路和软件算法.该控制器运行稳定.机械手动作精度、速度满足使用要求.     

断裂和裂缝的分形特征

在详细剖析断裂和裂缝组成和结构相似性的基础上, 计算了贝尔断陷T₅和T₂两层构造图上断裂信息维和10口井布达特群岩心裂缝信息维, 分析了影响断裂和裂缝信息维的因素, 达到了从断裂信息维去预测裂缝分布的目的.影响断裂和裂缝信息维的因素包括密度、延伸长度、断层性质以及岩性, 但从根本上讲断层性质及岩性对信息维影响体现在断裂的密度上, 因此信息维应该是断裂发育程度的度量, 利用断裂信息维与裂缝信息维关系、裂缝信息维与裂缝密度关系预测裂缝的分布, 有利的裂缝发育带有3个区域, 与现今见油气井分布吻合.      

基于循环孔洞扩张模型的X型圆管节点超低周疲劳寿命预测

海洋工程钢结构在服役过程中,受风、浪、流或地震等极端循环载荷的影响,易发生超低周疲劳断裂破坏,造成人员伤亡及财产损失,因此超低周疲劳断裂分析及寿命预测对于海工结构安全性评估至关重要。然而,现阶段基于累积损伤理论提出的多种超低周疲劳寿命预测模型无法对多尺度节点实现统一预测,造成了实际工程应用的不便。因此文中基于循环孔洞扩张模型开展X型圆管节点超低周疲劳寿命预测。首先,开发了基于循环孔洞扩张模型的VUSDFLD程序,实现ABAQUS与FORTRAN子程序联合应用,利用有限元分析验证循环孔洞扩张模型在X型圆管节点超低周疲劳断裂分析中的有效性;其次,根据多组X型圆管节点超低周疲劳断裂有限元分析结果,在宏观层面提出了一种基于Manson-Coffin公式的超低周疲劳寿命预测公式;最后,依据Miner理论,将适用于等幅加载的超低周疲劳寿命公式扩展至变幅加载情况,验证了多种节点尺寸下超低周疲劳公式的适用性,为工程应用提供了理论依据。     

In situ stress field of eastern Australia

New in situ data based on hydraulic fracturing and overcoring have been compiled for eastern Australia, increasing from 23 to 110 the number of in situ stress analyses available for the area between and including the Bowen and Sydney Basins. The Bowen Basin displays a consistent north‐northeast maximum horizontal stress (σ_H) orientation over some 500 km. Stress orientations in the Sydney Basin are more variable than in the Bowen Basin, with areas of the Sydney Basin exhibiting north‐northeast, northeast, east‐west and bimodal σ_H orientations. Most new data indicate that the overburden stress (σ_V) is the minimum principal stress in both the Bowen and Sydney Basins. The Sydney Basin is relatively seismically active, whereas the Bowen Basin is relatively aseismic. Despite the fact that in situ stress measurements sample the stress field at shallower depth than the seismogenic zone, there is a correlation between the stress measurements and seismicity in the two areas. Mohr‐Coulomb analysis of the propensity for failure in the Sydney Basin suggests 41% of the new in situ stress data are indicative of failure, as opposed to 13% in the Bowen Basin. The multiple pre‐existing structural grains in the Sydney Basin further emphasise the difference between propensity for failure in the two areas. Previous modelling of intraplate stresses due to plate boundary forces has been less successful at predicting stress orientations in eastern than in western and central Australia. Nonetheless, stress orientation in the Bowen Basin is consistent with that predicted by modelling of stresses due to plate boundary forces. Variable stress orientations in the Sydney Basin suggest that more local sources of stress, such as those associated with the continental margin and with local structure, significantly influence stress orientation. The effect of local sources of stress may be relatively pronounced because stresses due to plate boundary forces result in low horizontal stress anisotropy in the Sydney Basin.     

Modeling 3D thermal fracture propagation by transient cooling using virtual multidimensional internal bonds

Thermal fracturing can play an important role in development of unconventional petroleum and geothermal resources. Thermal fractures can result from the nonlinear deformation of the rock in response to thermal stress related to cold water injection as well as heating. Before the rock reaches the final failure stage, material softening and bulk modulus degradation can cause changes in the thermo‐mechanical properties of the solid. In order to capture this aspect of the rock fracture, a virtual multidimensional internal bond‐based thermo‐mechanical model is derived to track elastic, softening, and the failure stages of the rock in response to the temporal changes of its temperature field. The variations in thermo‐mechanical properties of the rock are derived from a nonlinear constitutive model. To represent the thermo‐mechanical behavior of pre‐existing fractures, the element partition method is employed. Using the model, numerical simulation of 3D thermal fracture propagation in brittle rock is carried out. Results of numerical simulations provide evidence of model verification and illustrate nonlinear thermal response and fracture development in rock under uniform cooling. In addition, fracture coalescence in a cluster of fractures under thermal stress is illustrated, and the process of thermal fracturing from a wellbore is captured. Results underscore the importance of thermal stress in reservoir stimulation and show the effectiveness of the model to predict 3D thermal fracturing. Copyright © 2016 John Wiley & Sons, Ltd.     

Modeling three‐dimensional hydraulic fracture propagation using virtual multidimensional internal bonds

Propagation of fractures, especially those emanating from wellbores and closed natural fractures, often involves Mode I and Mode II, and at times Mode III, posing significant challenges to its numerical simulation. When an embedded inclined fracture is subjected to compression, the fracture edge is constrained by the surrounding materials so that its true propagation pattern cannot be simulated by 2D models. In this article, a virtual multidimensional internal bond (VMIB) model is presented to simulate three‐dimensional (3D) fracture propagation. The VMIB model bridges the processes of macro fracture and micro bond rupture. The macro 3D constitutive relation in VMIB is derived from the 1D bond in the micro scale and is implemented in a 3D finite element method. To represent the contact and friction between fracture surfaces, a 3D element partition method is employed. The model is applied to simulate fracture propagation and coalescence in typical laboratory experiments and is used to analyze the propagation of an embedded fracture. Simulation results for single and multiple fractures illustrate 3D features of the tensile and compressive fracture propagation, especially the propagation of a Mode III fracture. The results match well with the experimental observation, suggesting that the presented method can capture the main features of 3D fracture propagation and coalescence. Moreover, by developing an algorithm for applying pressure on the fracture surfaces, propagation of a natural fracture is also simulated. The result illustrates an interesting and important phenomenon of Mode III fracture propagation, namely the fracture front segmentation. Copyright © 2012 John Wiley & Sons, Ltd.