水-岩化学作用对岩体变形破坏力学效应研究进展

水—岩化学作用对岩体变形破坏力学效应的研究涉及力学和化学两方面,也即为地球化学与岩体力学两个研究领域的交叉。针对水化学作用对岩体力学性质的影响机理,较系统地总结了该研究领域中的现状和研究新进展,分析了其研究方法,指出了今后的研究方向和主要研究内容,并认为此方面的研究将在工程地质学中占重要地位。     

壳幔成矿学初探

壳幔成矿学是联结深部地质学与区域成矿学的重要桥梁,将成矿作用与深部过程联系起来,进行壳幔成矿学研究,已成为当今区域成矿学的一种重要发展趋势,壳幔成矿学研究的核心内容是大陆壳幔多层圈相互作用与成矿关系,而壳幔成矿学研究的主要技术支撑是“岩石探针”分析,壳幔成矿学研究应选择若干典型区域,采用演化历史分析与作用过程鉴别结合的思路,对岩包体及其寄生主岩和有关矿床进行深入研究,以查明区域壳幔相互作用事件幕与     

Effects of Deep Fluids on Hydrocarbon Generation and Accumulation in Chinese Petroliferous Basins

Deep fluids in a petroliferous basin generally come from the deep crust or mantle beneath the basin basement, and they transport deep substances(gases and aqueous solutions) as well as heat to sedimentary strata through deep faults. These deep fluids not only lead to large-scale accumulations of CO_2, CH_4, H_2, He and other gases, but also significantly impact hydrocarbon generation and accumulation through organic-inorganic interactions. With the development of deep faults and magmatic-volcanic activities in different periods, most Chinese petroliferous basins have experienced strong impacts associated with deep fluid activity. In the Songliao, Bohai Bay, Northern Jiangsu, Sanshui, Yinggehai and Pearl Mouth Basins in China, a series of CO_2 reservoirs have been discovered. The CO_2 content is up to 99%, with δ~(13)C_(CO2) values ranging from-4.1‰ to-0.37‰ and ~3He/~4He ratios of up to 5.5 Ra. The abiogenic hydrocarbon gas reservoirs with commercial reserves, such as the Changde, Wanjinta, Zhaozhou, and Chaoyanggou reservoirs, are mainly distributed in the Xujiaweizi faulted depression of the Songliao Basin. The δ~(13)CCH4 values of the abiogenic alkane gases are generally -30‰ and exhibit an inverse carbon isotope sequence of δ~(13)C_(CH4)δ~(13)C_(C2H6)δ~(13)C_(C3H8)δ~(13)C_(C4H10). According to laboratory experiments, introducing external H_2 can improve the rate of hydrocarbon generation by up to 147% through the kerogen hydrogenation process. During the migration from deep to shallow depth, CO_2 can significantly alter reservoir rocks. In clastic reservoirs, feldspar is easily altered by CO_2-rich fluids, leading to the formation of dawsonite, a typical mineral in high CO_2 partial pressure environments, as well as the creation of secondary porosity. In carbonate reservoirs, CO_2-rich fluids predominately cause dissolution or precipitation of carbonate minerals. The minerals, e.g., calcite and dolomite, show some typical features, such as higher homogenization temperatures than the burial temperature, relatively high concentrations of Fe and Mn, positive Eu anomalies, depletion of 18 O and enrichment of radiogenic ~(87)Sr. Due to CO_2-rich fluids, the development of high-quality carbonate reservoirs is extended to deep strata. For example, the Well TS1 in the northern Tarim Basin revealed a high-quality Cambrian dolomite reservoir with a porosity of 9.1% at 8408 m, and the Well ZS1 C in the central Tarim Basin revealed a large petroleum reserve in a Cambrian dolomite reservoir at ~6900 m. During the upward migration from deep to shallow basin strata, large volumes of supercritical CO_2 may extract petroleum components from hydrocarbon source rocks or deep reservoirs and facilitate their migration to shallow reservoirs, where the petroleum accumulates with the CO_2. Many reservoirs containing both supercritical CO_2 and petroleum have been discovered in the Songliao, Bohaiwan, Northern Jiangsu, Pearl River Mouth and Yinggehai Basins. The components of the petroleum trapped with CO_2 are dominated by low molecular weight saturated hydrocarbons.     

Pile driving by numerical cavity expansion

A cavity expansion procedure for the simulation of pile driving is presented and assessed in this paper. The analysis uses a non-linear finite-element model and the penetration of the pile into the soil is simulated by a radial opening of the soil around the pile. The case of a pile advanced by expansion will be compared to a similar pile subjected to computational driving (referred to, respectively, as ‘expanded’ and ‘driven’ piles for convenience). The state of stress and deformation, and the evolution of pore-water pressure in the soil will be monitored for the expanded and driven piles. Further computational driving will be applied to both cases and the pile response and soil resistance will be compared. The computational cost of advancing the pile by expansion will finally be investigated. Copyright © John Wiley & Sons, Ltd.     

The oldest Mo porphyry mineralization in the Yangtze Valley Metallogenic Belt of eastern China: Constraints on its origin from geochemistry,geochronology and fluid inclusion studies at Matou

The Matou Mo(-Cu) deposit, located in the Yangtze Valley Metallogenic Belt of central-eastern China, is a typical porphyry-type Mo deposit. The orebodies at the deposit are hosted by Matou porphyritic granodiorite, which is the largest intrusive in the area. Quartz vein-type and disseminated sulfide mineralization are well developed in the porphyry and near its contact with Silurian sandstone. Crosscutting relationships indicate that porphyritic granodiorite is the oldest phase in the pluton, which is crosscut by a porphyritic diorite containing traces of chalcopyrite, and later dolerite dykes. These phases have U-Pb zircon dates of 147 ± 3, 140 ± 1 and 135 ± 1 Ma, which confirms the cross-cutting relationships observed in the field. A Re-Os molybdenite isochron age of 147 ± 4 Ma indicates that the porphyritic granodiorite is the source of the oldest Mo mineralization in the metallogenic belt and was formed during a change of the tectonic setting in the area, from an intracontinental orogeny to extensional tectonics. From 147 to 135 Ma, crust-mantle interaction played an important role in the formation of magmatic rocks at Matou. Systematic petrological and geochemistry investigations reveal that the three phases have a crust source with minor input from the mantle. Investigation of ore-forming fluid, H-O isotopes, S isotopes, and the Re content of molybdenite indicate that the ore-forming fluid and metals were derived from the lower crust. During the evolution of fluid from initial magmatic fluids (stage I) to ore-forming fluids (stage II), fluid boiling accompanied by the input of relatively cooler meteoric water led to the deposition of the Mo mineralization.     

Fault interaction and seismicity: Laboratory investigation and its seismotectonic interpretation

Systems of two parallel linear faults of the same length with the angle of inclination =45° were investigated under uniaxial linearly increasing load. Perspex plates were used as models. For each treated fault configuration the morphology of tensile cracks and the sequence of seismoacoustic events of shear and tensile origin were studied.It is shown that the seismic regime of a fault system is strongly influenced by the contact conditions on a fault plane; it is different in the faults with the aseismic contact, represented by open slits, and in the faults with the seismoactive contact, represented by filled slits, respectively.The experiments proved the dominating role of a fast shear displacement of the stick-slip type in the regime of seismic energy release of a fault system. The tensile crack generation seems to be only of little—if not negligible—importance. On the other hand, the existence of tensile cracks in a fault system can play an important role in the course of subsequent loading cycles because the stick-slip displacements can take place not only along the primary faults but also along the planes of tensile cracks.A comparison of some results of model experiments and the already published results of geological and seismological investigations indicated that the way of seismic energy relase on faults in nature and in the laboratory could be of the same character. Several analogies between the seismic regime of a fault model and of real seismic regions were found concerning the morphology of faults, off-fault fore- and aftershocks, and earthquake doublets, respectively.     

成矿过程中流体的作用及其主要研究方法

流体在成矿过程中扮演着十分重要的角色,它是成矿物质得以活化、迁移、富集的主要介质,同时流体的运移还能扩展有利的成矿空间,同位素地化学方法仍然是成矿流体研究的主要手段,实验地球化学、元素地球化学以及现代岩石学和矿物学研究方法在探讨流体的起源、演化等方面已发挥越来越重要的作用。每种方法均有其局限性,在实际工作中强调多种研究方法的结合十分必要。     

Active faulting at the Eurasian, North American and Pacific plates junction

The active faults known and inferred in the area where the major Pacific, North American and Eurasian plates come together group into two belts. One of them comprises the faults striking roughly parallel to the Pacific ocean margin. The extreme members of the belt are the longitudinal faults of islands arcs, in its oceanic flank, and the faults along the continental margins of marginal seas, in its continental flank. The available data show that all these faults move with some strike-slip component, which is always right-lateral. We suggest that characteristic right-lateral, either partially or dominantly, kinematics of the fault movements has its source in oblique convergence of the Pacific plate with continental Eurasian and North American plates. The second belt of active faults transverses the extreme northeast Asia as a continental extension of the active mid-Arctic spreading ridge. The two active fault belts do not cross but come close to each other at the northern margin of the Sea of Okhotsk marking thus the point where the Pacific, North American and Eurasian plates meet.     

Petrogenesis of Dashenshan I-type granodiorite: implications for Triassic crust–mantle interaction,South China

Triassic granodiorites in South China (SC) provide an opportunity to examine crust–mantle interactions that may have been caused by a mantle plume. Here we present a combined study of chronological, geochemical, and Sr–Nd–Hf isotopic compositions for Dashenshan granodiorites. These are high-K, calc-alkaline, I-type granodiorites that yield a U–Pb zircon age of 211 ± 3 Ma. They are metaluminous to weakly peraluminous (A/CNK < 1.1), with 3.04–3.89 wt.% Na₂O and 3.24–3.86 wt.% K₂O, and Na₂O/K₂O ratio ranging from 0.79 to 1.11. These granodiorites contain 67.7–72.6 wt.% SiO₂ but show moderate Mg^# values (44.2–57.8) and variable contents of Ni (3.6–29.9 ppm) and Cr (7.6–53.5 ppm). They exhibit light rare earth element (REE) enrichment and flat, heavy REE patterns with negative Eu anomalies (Eu/Eu* = 0.52–0.87). They also display strongly negative Ba, Sr, Nb, Ta, P, and Ti anomalies and positive Rb, Th, K, and Pb anomalies. Dashenshan granodiorites have high whole-rock initial ⁸⁷Sr/⁸⁶Sr ratios (0.7121–0.7172), negative ε_Nd (t) values (–8.8 to –6.8), and negative zircon ε_Hf (t) values (–6.6 to –3.3). These results suggest that the Dashenshan granodiorites were generated by a mixing between crustal melt and mantle-derived magma in an extensional setting. We conclude that generation of the Dashenshan pluton may reflect an interaction between a mantle plume and the overlying SC crust.