Estimation of regional material yield from coastal landslides based on historical digital terrain modelling

High‐resolution historical (1942) and recent (1994) digital terrain models were derived from aerial photographs along the Big Sur coastline in central California to measure the long‐term volume of material that enters the nearshore environment. During the 52‐year measurement time period, an average of 21 000 ± 3100 m³ km^?1 a^?1 of material was eroded from nine study sections distributed along the coast, with a low yield of 1000 ± 240 m³ km^?1 a^?1 and a high of 46 700 ± 7300 m³ km^?1 a^?1. The results compare well with known volumes from several deep‐seated landslides in the area and suggest that the processes by which material is delivered to the coast are episodic in nature. In addition, a number of parameters are investigated to determine what influences the substantial variation in yield along the coast. It is found that the magnitude of regional coastal landslide sediment yield is primarily related to the physical strength of the slope‐forming material. Coastal Highway 1 runs along the lower portion of the slope along this stretch of coastline, and winter storms frequently damage the highway. The California Department of Transportation is responsible for maintaining this scenic highway while minimizing the impacts to the coastal ecosystems that are part of the Monterey Bay National Marine Sanctuary. This study provides environmental managers with critical background data on the volumes of material that historically enter the nearshore from landslides, as well as demonstrating the application of deriving historical digital terrain data to model landscape evolution. Published in 2005 by John Wiley & Sons, Ltd.     

Rock albedo and monitoring of thermal conditions in respect of weathering: some expected and some unexpected results

Broadly speaking, there is, at least within geomorphic circles, a general acceptance that rocks with low albedos will warm both faster and to higher temperatures than rocks with high albedos, reflectivity influencing radiative warming. Upon this foundation are built notions of weathering in respect of the resulting thermal differences, both at the grain scale and at the scale of rock masses. Here, a series of paving bricks painted in 20 per cent reflectivity intervals from black through to white were used to monitor albedo‐influenced temperatures at a site in northern Canada in an attempt to test this premise. Temperatures were collected, for five months, for the rock surface and the base of the rock, the blocks being set within a mass of local sediment. Resulting thermal data did indeed show that the dark bricks were warmer than the white but only when their temperatures were equal to or cooler than the air temperature. As brick temperature exceeded that of the air, so the dark and light bricks moved to parity; indeed, the white bricks frequently became warmer than the dark. It is argued that this ‘negating’ of the albedo influence on heating is a result of the necessity of the bricks, both white and black, to convect heat away to the surrounding cooler air; the darker brick, being hotter, initially convects faster than the white as a product of the temperature difference between the two media. Thus, where the bricks become significantly hotter than the air, they lose energy to that air and so their respective temperatures become closer, the albedo influence being superceded by the requirement to equilibrate with the surrounding air. It is argued that this finding will have importance to our understanding of weathering in general and to our perceptions of weathering differences between different lithologies. Copyright © 2005 John Wiley & Sons, Ltd.     

储层岩石电性特征的逾渗网络模型研究(英文)

建立能够反映储层孔隙结构、流体特征的逾 渗网络模型,通过数值模拟研究了储层孔隙尺寸、 孔隙形状、连通性、微孔隙的发育状况等对I-Sw曲 线影响的定性规律,研究了地层水矿化度对岩石电 阻率的影响。分析讨论了不同因素对电阻率影响的 相对强度。最后,通过曲线拟合定量地研究了不同 因素对I-Sw曲线的影响规律。研究表明,在上述影 响因素中连通性和微孔隙对I-Sw曲线的影响很大, 其它因素的影响强度较小。地层水矿化度对岩石电 阻率绝对值的影响很大。“非阿尔奇”现象普遍存在, 在低渗透(低连通性)储层岩石中更为明显。     

乾陵地震台DSC-2A型数据采集器雷害故障与处理

通过对乾陵地震台DSC2A型数据采集器雷害故障现象特征、诊断修复过程、故障原因等的分析,提出了数据采集器雷害故障检修的一般步骤方法,并认为,数据采集器内部模拟输入通道转换继电器和通道程控放大电路ICL7650集成运放块易遭雷击损坏,是故障率较高的部件。     

Use of time series analysis for the identification of tidal effect on groundwater in the coastal area of Kimje, Korea

The purpose of this study is to apply time series analysis to investigate whether the groundwater quality in the coastal area is affected by the tide. Continuous and regular in situ monitoring data of electrical conductivity (EC) and groundwater level, and tidal level data measured by the National Oceanographic Research Institute were used for the time series analysis. Through the time series analysis, it is known that EC and groundwater level conspicuously fluctuate with two periodicities (15.4 and 0.52-day), which is very similar to those of the tide. Also the behaviors of their fluctuations vary in accordance with the tidal period. These indicate that the groundwater quality has been mainly controlled by the tidal level, and the strength of tidal effect on the groundwater quality is different according to the tidal period.     

致密砂岩的形成机制及其地质意义——以塔里木盆地英南2井为例

砂质岩的孔隙和喉道被网格状粘土矿物和次生加大矿物充填成微细孔喉状结构时,形成具有较高毛细管压力的致密砂岩。它与地层水发生水锁效应,可大大降低渗透率,成为致密砂岩盖层。当含水饱和度在50%以下时,束缚水饱和度比较低,致密砂岩储层可以产气;当含水饱和度在50%～90%区间时,具有较高的束缚水饱和度,相对渗透率非常低,它既不能产气也不能产水,反映为渗透率瓶颈区(具有盖层性质);当含水饱和度大于90%以上时,致密砂岩储层仅微量产水。塔里木盆地英南2井侏罗系气藏盖层由致密砂岩构成,不含水时的气体渗透率在(0.027～0.081)×10-3μm2,不能构成封堵;当含水饱和度达到60%以上时,相对渗透率几乎为零,构成有效盖层。     

鲁东南岚山头超高压变质岩流体包裹体特征与板片折返史

鲁东南岚山头含柯石英榴辉岩主要产于花岗质片麻岩内,是苏鲁超高压变质带主要榴辉岩体密集分布区之一。流体包裹体研究表明,榴辉岩矿物及细脉石英中捕获有四种类型包裹体:在超高压-高压榴辉岩相条件下捕获的 N_2±CO_2包裹体;在高压榴辉宕重结晶阶段被捕获的 CO_2-H_2O 包裹体和含子矿物高盐度 H_2O 溶液包裹体:在超高压岩石折返过程中的最晚(角闪岩相退变质甚至更晚)阶段捕获的低盐度 H_2O 溶液包裹体。利用榴辉岩矿物及脉体石英中捕获的流体包裹体相互期次关系,可以对本区超高压变质作用板片折返过程中的流体演化史进行重建。     

在卸荷产生拉剪情况下裂隙岩体的力学行为

据岩体在卸荷情况下的拉剪应力状态,确定了节理岩体的线弹性断裂力学模型。依照此模型,可以得到相对远离裂隙(该位置的点到裂隙中心的距离比裂缝长度大)且受裂隙影响区域内应力、应变和变形方程。这些对评估裂隙岩石变形有重要的参考意义。通过用理论方程的计算结果和卸荷情况下试验观测所得的数据对比,证明该模型应用于实际工程中具有可行性。     

宁东煤田枣泉矿井综合物探效果

为探明宁东煤田枣泉矿井首采区煤层自然范围及充水性，根据采区内地球物理物征，采用高精度磁法，直流电测深法和激发极化法进行综合勘探。在磁法勘探中结合测区曲线特征，建立数据体模型，正演计算烧变岩边界；电法勘探利用烧变岩含水后电阻率降低的特征确定其含水范围及富水性。     

Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.