大姚地热动态特征分析

通过大姚高精度水温观测井水地质、井孔条件的分析，震例观测资料、实验观测数据的处理，以及井水水质分析结果，表明大姚水温周期性变化的突出位置是井深75m左右，根本原因是该地层石膏脉稳定释热，含水层热水与井内冷水混合过程中，在通道内形成钙盐类沉淀物（如CaSO4CaCO3），堵塞对流通道，含水层内外压差突破被阻塞通道，热水反复侵入井内，便形成水温周期性变化。地震的孕育、发生和调整过程，由于应力场作用，产生附加地热场，水温基值发生变化，周期畸变或消失，这种附加地热动态是可以恢复的。所以认为大姚地热动态是井区特殊地层地热信息的反映。     

大港油田板深22井油气地球化学异常特征

根据板深22井中不同地球化学指标的背景含量和异常特征，重点探索和总结了不同油气层的化探指纹指标，并根据地表指纹指标的异常组合、配套关系及异常特征，对油气层的埋深进行了初步预测，为今后该地区地表开展预测油气藏埋深的工作提供了一定的地球化学依据。     

罕见矿物--六方球方解石的发现及特征

大庆油田部分三元复合驱抽油井结垢现象比较严重。井中结垢损害抽油设备，增加了生产成本。通过运用XRD，IR，SEM和化学分析手段对抽油井垢的研究发现，垢的主要化学成分为CaO和SiO2，其含量分别为67％和28％，油井垢中的主要矿物成分是罕见矿物——六方球方解石。六方球方解石呈微晶状(1—10μm)，并常常以微晶聚集的球粒状出现，同时伴生有无定形SiO2。呈游离态的SiO2和有机质对于六方球方解石的形成起到了重要作用。     

扁铲侧胀试验判别液化的研究和实践

通过对扁铲侧胀试验判别液化的研究和实践，提出了在上海地区采用扁铲侧胀试验判别液化的公式，扁铲侧胀试验判别液化与标准贯入和静力触探试验判别液化的方法对比，具有相对较好的结果，是一种有前途的液化判别方法。     

结构设计地震作用效应影响因素及规律分析

基于现行《建筑抗震设计规范》（GB50011－2001），本文分析了现行抗震设计中影响结构设计地震作用效应的主要因素，以规则平面框架对例对新旧规范影响结构设计地震作用效应的因素进行了对比，给出了其间的重要变化和基本规律。     

石泉ML4．7级地震前天水深井水温的短临异常特征

分析了天水台数字深井水温资料在陕西石泉ML4．7级地震前的异常特征，发现在震前5天内深井水温发生大幅度的降升变化，呈负脉冲形态，表现为典型的脉冲型前兆异常形态特征。     

冠县引黄井渠结合灌区机井建设浅议

针对目前冠县引黄井渠结合灌区机井建设发展中主要存在机井发展不平衡、机井退化、老化、成井质量差等问题，因地制宜，提出了今后灌区发展机井建设的具体措施。     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

空间点相对关系的精密检测

工业检测的精度一般要求很高，常规的检测手段难以达到。本文对空间点相对关系的精密检测方法和精度进行分析，实践表明该方法行之有效。     

Diagenetic history and porosity evolution of Upper Carboniferous sandstones from the Spring Valley #1 well, Maritimes Basin, Canada–implications for reservoir development

Eighty-two core samples were collected from the Spring Valley #1 well which penetrates the Upper Carboniferous strata in the Late Devonian–Early Permian Maritimes Basin. The strata consist of alternating sandstones and mudstones deposited in a continental environment. The objective of this study is to characterize the relationship of sandstone porosity with depth, and to investigate the diagenetic processes related to the porosity evolution. Porosity values estimated from point counting range from 0% to 27.8%, but are mostly between 5% and 20%. Except samples that are significantly cemented by calcite, porosity values clearly decrease with depth. Two phases of calcite cement were distinguished based on Cathodoluminescence, with the early phase being largely dissolved and preserved as minor relicts in the later phase. Feldspar dissolution was extensive and contributed significantly to the development of secondary porosity. Quartz cementation was widespread and increased with depth. Fluid inclusions recorded in calcite and quartz cements indicate that interstitial fluids in the upper part of the stratigraphic column were dominated by waters with salinity lower than that of seawater, the middle part was first dominated by low-salinity waters, then invaded by brines, and the lower part was dominated by brines. Homogenization temperatures of fluid inclusions generally increase with depth and suggest a paleogeothermal gradient of 25 °C/km, which is broadly consistent with that indicated by vitrinite reflectance data. An erosion of 1.1–2.4 (mean 1.75) km of strata is inferred to have taken place above the stratigraphic column. δ¹⁸O values of calcite cements (mainly from the late phase) decrease with depth, implying increasing temperatures of formation, as also suggested by fluid-inclusion data. δ¹³C values of calcite cements range from −13.4‰ to −5.7‰, suggesting that organic matter was an important carbon source for calcite cements. A comparison of the porosity data with a theoretical compaction curve indicates that the upper and middle parts of the stratigraphic column show higher-than-normal porosity values, which are related to significant calcite and feldspar dissolution. Meteoric incursion and carboxylic acids generated from organic maturation were probably responsible for the abundant dissolution events.