Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.     

THE U.S. MILITARY AS GEOGRAPHICAL AGENT: THE CASE OF COLD WAR ALASKA*

ABSTRACT. Alaska was strategically key to the U.S. defense plan during the cold war (1946–1989). As such, it was the scene of an enormous and sustained military investment, the effect of which was amplified by Alaska's undiversified economy, sparse development, small resident population, and marginalized political status at the beginning of the era. The strong military presence affected Alaskan demographics, economic development, and infrastructure and figured prominently in the admission of Alaska to the union in 1959. The high profile and long‐term presence of the U.S. military had such a dramatic affect on the course of Alaska that the result was tantamount to a “militarized landscape.”     

Hydrography of the eastern Arabian Sea during summer monsoon 2002

Hydrographic observations in the eastern Arabian Sea (EAS) during summer monsoon 2002 (during the first phase of the Arabian Sea Monsoon Experiment (ARMEX)) include two approximately fortnight-long CTD time series. A barrier layer was observed occasionally during the two time series. These ephemeral barrier layers were caused byin situ rainfall, and by advection of low-salinity (high-salinity) waters at the surface (below the surface mixed layer). These barrier layers were advected away from the source region by the West India Coastal Current and had no discernible effect on the sea surface temperature. The three high-salinity water masses, the Arabian Sea High Salinity Water (ASHSW), Persian Gulf Water (PGW), and Red Sea Water (RSW), and the Arabian Sea Salinity Minimum also exhibited intermittency: they appeared and disappeared during the time series. The concentration of the ASHSW, PGW, and RSW decreased equatorward, and that of the RSW also decreased offshore. The observations suggest that the RSW is advected equatorward along the continental slope off the Indian west coast.     

程裕淇主编《中国地层典》记失

文章列数了《中国地层典》5个方面的重要失误:不是中国地层名称全览性的工具书,急于采用处于争议中的术语,大量地层单位名称的出处因考证不到位而形成张冠李戴,采用的历史优先律不是国际共识,在编撰过程中建立新名称。文章用选出的泰山杂岩、滹沱系、秦岭片岩和仑山石灰岩4个名称为例说明《中国地层典》对其出处的考证不到位,进而论证《中国地层典》的诸多解释可信度低。文章严肃地指出“历史优先律”给中国地层学造成的不良后果:它破坏了地层命名法的标准性,颠倒了中国地层命名史,干扰了中国地层名称的管理。     

联合GPS和GRACE数据分析陕甘宁地区地表垂直形变

采用甘肃省CORS网和中国大陆构造环境监测网络中共48个台站的GPS观测数据，解算得到观测台站的垂直位移，并与GRACE时变重力场Mascon模型解CSR RL05M数据计算得到的垂直形变进行比较，分析区域地表垂直形变特征。结果表明，研究区内台站垂直形变存在局部特征，甘肃庆阳和平凉地区垂直形变与其他地区存在明显差异，相关系数、均方根减少量和周年信号减少量均高于其他地区；扣除趋势项后，观测台站GPS垂直位移与GRACE垂直形变时间序列相关系数均值为0.72，GPS和GRACE周年信号振幅均值分别为6.00 mm和3.70 mm，周年信号减少量和均方根误差减少量均值分别为0.51和0.29；研究区内GPS垂直位移和GRACE垂直形变时间序列一致性较强，GRACE垂直形变能有效解释50%以上的GPS垂直位移周年信号，GPS垂直位移时间序列包含的非构造形变中平均约29%来源于环境负载变化所引起的负荷形变。     

Analysis of rectangular piles subjected to lateral loads in nonhomogeneous soil using a Winkler model approach

An analytical approach using a Winkler model based on two lateral soil displacement components in a three‐dimensional soil is investigated to provide analytical solutions of horizontal response of a rectangular pile subjected to lateral loads in nonhomogeneous soil. The two lateral displacement components of a soil surrounding the rectangular pile are represented by the Fourier series of displacement potential functions in the elastic three‐dimensional analysis. The lateral stiffness coefficient of the rectangular pile shaft in nonhomogeneous soil is derived from the rocking stiffness coefficient taking into account rocking rotation of a rigid pile shaft. The relationship between horizontal displacement, rotation, moment, and shear force for the rectangular pile subjected to horizontal loads in nonhomogeneous soil is obtainable in the form of the recurrence equation. The formulation of lateral displacement and rotation for a rectangular pile subjected to lateral loads on the pile base in nonhomogeneous soil is proposed by taking into account Mindlin's equation and the equivalent thickness for soil layers in the equivalent elastic method. The difference of lateral behavior between square and circular piles subjected to lateral loads is insignificant. The effect of aspect ratio of the rectangular pile on the lateral behavior is great for the lower stiffness ratio between pile and soil and the larger length–equivalent diameter ratio. The effect of the value of Poisson's ratio of soil on lateral stiffness coefficient is relatively small except Poisson's ratio close to 0.5. The comparison of the results calculated by the current method for a rectangular pile subjected to lateral loads in nonhomogeneous soil has shown good agreement with those obtained from the analytical methods and the finite element method. Copyright © 2015 John Wiley & Sons, Ltd.     

Improved spatial delineation of streambed properties and water fluxes using distributed temperature sensing

A new method was developed for analysing and delineating streambed water fluxes, flow conditions and hydraulic properties using coiled fibre‐optic distributed temperature sensing or closely spaced discrete temperature sensors. This method allows for a thorough treatment of the spatial information embedded in temperature data by creating a matrix visualization of all possible sensor pairs. Application of the method to a 5‐day field dataset reveals the complexity of shallow streambed thermal regimes. To understand how velocity estimates are affected by violations of assumptions of one‐dimensional, saturated, homogeneous flow and to aid in the interpretation of field observations, the method was also applied to temperature data generated by numerical models of common field conditions: horizontal layering, presence of lateral flow and variable streambed saturation. The results show that each condition creates a distinct signature visible in the triangular matrices. The matrices are used to perform a comparison of the behaviour of one‐dimensional analytical heat‐tracing models. The results show that the amplitude ratio‐based method of velocity calculation leads to the most reliable estimates. The minimum sensor spacing required to obtain reliable velocity estimates with discrete sensors is also investigated using field data. The developed method will aid future heat‐tracing studies by providing a technique for visualizing and comparing results from fibre‐optic distributed temperature sensing installations and testing the robustness of analytical heat‐tracing models. Copyright © 2016 John Wiley & Sons, Ltd.     

基于NDVI时间序列数据的江西省水稻种植制度变化研究

利用Savitzky-Golay滤波对覆盖江西省范围的SPOT VGT NDVI时间序列数据进行平滑处理的基础上,结合坡度数据,通过非监督分类的方法提取了江西省2000、2005和2010年水稻种植范围,并根据NDVI的年内动态变化,从水稻种植范围、水稻生长季起始时间、水稻复种指数和NDVI最大振幅等分析了江西省水稻种植和生长情况,探讨2000~2010年江西省水稻生产的变化。     

L1范数与IQR统计量组合的GNSS坐标序列粗差探测算法

GNSS坐标时间序列中不可避免地含有粗差,未剔除的粗差将会导致参数估计有偏。因此,粗差探测与剔除是GNSS坐标序列分析中一项重要的数据预处理工作。针对GNSS坐标时间序列特点,提出了一种将L1范数(L1-norm)估计与四分位距统计量IQR(interquartile range)组合的移动开窗粗差探测算法,称之为L1_Mod IQR。该方法的主要思想是,首先利用L1范数估计得到较"真实"的残差,然后再对残差采用IQR统计量进行粗差探测。将L1_Mod IQR法与"3σ"法、基于最小二乘的τ检验法等粗差探测算法进行了模拟计算与对比,验证了该算法的有效性。进一步采用L1_Mod IQR算法对中国区域10个IGS站的高程时间序列进行了分析,结果表明中国区域IGS站高程序列的粗差剔除率最小为0.1%,最大为2.6%。并且以WUHN站为例与SOPAC提供的结果进行了对比,结果表明SOPAC提供的"Clean"数据仍含有大量的粗差,而L1_Mod IQR算法能够有效地剔除粗差。