基于历史关系数据库的时空数据库实现研究

时空数据库是研究如何存储历史和当前的时空数据,从而跟踪分析某一区域的变化,最终实现时空模型化和模拟地学过程.采用历史关系数据库模式的时空数据库可以充分利用传统时态数据库时态查询功能和GIS空间分析处理功能这些方面成熟的研究成果和现有系统,降低时空数据库建立的费用和开销.分析了采用扩展关系型时空数据库的原因,介绍了历史关系数据库模式、时态关系代数和查询语言,研究了采用历史关系数据库模式在全关系化空间数据库中组织时态信息的方法,从而实现时空数据库.以麦地轮作为例说明了采用历史关系数据库模式建立时空数据库的可行性和有效性.     

汶川特大地震后成都盆地内隐伏断层活动性分析

成都盆地内主要有3条隐伏的活动断裂带,包括大邑断裂带、蒲江-新津断裂带和龙泉山断裂带,它们在第四纪都表现出了一定的活动性."512"汶川特大地震后,笔者实地考察的结果表明,在汶川特大地震中成都盆地中的隐伏断裂没有产生新的活动性,目前成都盆地不存在发生特大地震的危险性,是安全的.     

泥石流堆积物的粒度分布及其分形结构

泥石流堆积物主要由砾石、砂砾、粉粒和粘粒组成,组成泥石流堆积物的颗粒级配变幅很大,从直径大于数十米的巨砾到肉眼难以看见的几微米的胶体微粒均有分布,大小颗粒粒径之比可达106—107。泥石流堆积物颗粒具有明显的自相似性和无标度区间。本文以小江流域多处泥石流堆积物为研究对象,采用图解法全面分析了泥石流堆积物的粒度组成特征,根据分形理论计算了泥石流堆积物颗粒的分维值,对泥石流堆积物的分形特征进行探讨,并与泥石流堆积物粒度特征相联系,发现分维很好的反映了泥石流堆积物颗粒组成及其粒度分布特征。将泥石流堆积物颗粒分维与泥石流的粘性、形成年代等性质相联系,以找出它们彼此之间的关系。     

平山县泥石流的形成特征和机理分析

平山县是河北省太行山区主要泥石流地质灾害频发区,每年7～8月份强降雨期间,沟谷源头侧壁岩土体在雨水的浸泡下失稳破坏,形成崩塌与滑坡,崩滑的岩土体与沟源洼地中积聚的洪水迅速混合形成泥石流。本文认真分析了该区泥石流的分布概况,研究了泥石流灾变的形成特征,并从泥石流形成的物源条件和动力条件两方面分析了泥石流发生的机理和崩滑转化机制。     

Debris-flow event in the Frangerello Stream-Susa Valley (Italy)—calibration of numerical models for the back analysis of the 16 October, 2000 rainstorm

Three debris-flow simulation model software have been applied to the back analysis of a typical alpine debris flow that caused significant deposition on an urbanized alluvial fan. Parameters used in the models were at first retrieved from the literature and then adjusted to fit field evidence. In the case where different codes adopted the same parameters, the same input values were used, and comparable outputs were obtained. Results of the constitutive laws used (Bingham rheology, Voellmy fluid rheology and a quadratic rheology formulation which adds collisional and turbulent stresses to the Bingham law) indicate that no single rheological model appears to be valid for all debris flows. The three applied models appear to be capable of reasonable reproduction of debris-flow events, although with different levels of detail. The study shows how different software can be used to predict the debris-flow motion for various purposes from a first screening, to predict the runout distance and deposition of the solid material and to the different behaviour of the mixtures of flows with variation of maximum solid concentration.     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.     

Sedimentary characteristics of terrigenous debris at site MD05-2905 in the northeastern part of the South China Sea since 36 ka and evolution of the East Asian monsoon

Sediments with high sedimentation rate at site MD05-2905 in the Northeastern slope of the South China Sea provide unique materials for a high-resolution study on the paleoenvironment. Based on precise dating of AMS ¹⁴C, grain size analysis of terrigenous debris at core MD05-2905 was conducted after organic matter, biological carbonate and biogenic opal were removed. The results show that 15.5–63.5 μm coarse grain size ingredients may indicate East Asian winter monsoon changes and that 2–9 μm fine grain size ingredients may be used as a proxy of evolution of the East Asian summer monsoon. The results of grain size analysis, which suggest East Asian monsoon intensity, reveal that a winter monsoon dominated the glacial regime and a summer monsoon dominated the Holocene regime. It was also shown that the summer monsoon increased gradually, experienced several abrupt changes and reached a culmination in the early Holocene (11200–8500 a B.P.) since 36 ka. Controlled by precession periodicity, it may be related with the amount of solar radiation at the highest stage, which needs further study. __________ Translated from Advances in Earth Science, 2007, 22(10): 1012–1018 [译自: 地球科学进展]     

Bayesian estimation of seismic hazard for two sites in Switzerland

Seismic hazard analysis is based on data and models, which both are imprecise and uncertain. Especially the interpretation of historical information into earthquake parameters, e.g. earthquake size and location, yields ambiguous and imprecise data. Models based on probability distributions have been developed in order to quantify and represent these uncertainties. Nevertheless, the majority of the procedures applied in seismic hazard assessment do not take into account these uncertainties, nor do they show the variance of the results. Therefore, a procedure based on Bayesian statistics was developed to estimate return periods for different ground motion intensities (MSK scale).Bayesian techniques provide a mathematical model to estimate the distribution of random variables in presence of uncertainties. The developed method estimates the probability distribution of the number of occurrences in a Poisson process described by the parameter . The input data are the historical occurrences of intensities for a particular site, represented by a discrete probability distribution for each earthquake. The calculation of these historical occurrences requires a careful preparation of all input parameters, i.e. a modelling of their uncertainties. The obtained results show that the variance of the recurrence rate is smaller in regions with higher seismic activity than in less active regions. It can also be demonstrated that long return periods cannot be estimated with confidence, because the time period of observation is too short. This indicates that the long return periods obtained by seismic source methods only reflects the delineated seismic sources and the chosen earthquake size distribution law.     

Formation of the mid-fifteenth century Kuwae caldera (Vanuatu) by an initial hydroclastic and subsequent ignimbritic eruption

In the mid-fifteenth century, one of the largest eruptions of the last 10 000 years occurred in the Central New Hebrides arc, forming the Kuwae caldera (12x6 km). This eruption followed a late maar phase in the pre-caldera edifice, responsible for a series of alternating hydromagmatic deposits and airfall lapilli layers. Tuffs related to caldera formation ( 120 m of deposits on a composite section from the caldera wall) were emitted during two main ignimbritic phases associated with two additional hydromagmatic episodes. The lower hydromagmatic tuffs from the precaldera maar phase are mainly basaltic andesite in composition, but clasts show compositions ranging from 48 to 60% SiO₂. The unwelded and welded ashflow deposits from the ignimbritic phases and the associated intermediate and upper hydromagmatic deposits also show a wide compositional range (60–73% SiO₂), but are dominantly dacitic. This broad compositional range is thought to be due to crystal fractionation. The striking evolution from one eruptive style (hydromagmatic) to the other (magmatic with emission of a large volume of ignimbrites) which occurred either over the tuff series as a whole, or at the beginning of each ignimbritic phase, is the most impressive characteristic of the caldera-forming event. This strongly suggests triggering of the main eruptive phases by magma-water interaction. A three-step model of caldera formation is presented: (1) moderate hydromagmatic (sequences HD 1–4) and magmatic (fallout deposits) activity from a central vent, probably over a period of months or years, affected an area slightly wider than the present caldera. At the end of this stage, intense seismic activity and extrusion of differentiated magma outside the caldera area occurred; (2) unhomogenized dacite was released during a hydromagmatic episode (HD 5). This was immediately followed by two major pyroclastic flows (PFD 1 and 2). The vents spread and intense magma-water interaction at the beginning of this stage decreased rapidly as magma discharge increased. Subsequent collapse of the caldera probably commenced in the southeastern sector of the caldera; (3) dacitic welded tuffs were emplaced during a second main phase (WFD 1–5). At the beginning of this phase, magma-water interaction continued, producing typical hydromagmatic deposits (HD 6). Caldera collapse extended to the northern part of the caldera. Previous C¹⁴ dates and records of explosive volcanism in ice from the south Pole show that the climactic phase of this event occurred in 1452 A.D.     

The emplacement of intermediate volume ignimbrites: A case study from Roccamonfina Volcano,Southern Italy

A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km³ volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement.