对岛状融区房建冻害的几点认识——以沱沱河兵站楼房为例

座落在岛状融区中的青藏高原沱沱河兵站楼房,由于跨年度施工,楼房各部位季节冻深和融化速度不一,引起不均匀下沉,致使墙体产生严重裂缝。岛状融区是工程地质环境敏感区。在太阳辐射强烈的青藏高原,现行建筑规范中房屋采暖对冻深的影响系数偏小,建议对北外墙中段和角端应比规范规定系数分别增大0.2和0.3。     

The historic and artistic heritage facing the earthquake risk: The Italian case

The problem of protection against earthquakes in Italy is made difficult by the presence of a huge historic and artistic heritage. Such a heritage is mainly made up of ancient buildings and monuments situated in the urban centres, which are densely distributed throughout Italy. Therefore, very complex problems are met in the determination of the value parameter concurring with the determination of seismic risk, in addition to hazard and vulnerability. An indication of the monetary value of a building is not sufficient as far as the cultural heritage is concerned: different criteria are necessary in order to distinguish which are the strategic buildings. If we consider that there are more than 2000 museums in Italy, most of which are placed inside historic buildings, it appears that museums should receive the highest priority in future initiatives for seismic rehabilitation.     

民房震害预测专家评定统计模型的探讨

本文针对专家评定意见有一定伸缩性的特点,将专家意见表示为评定论域上的模糊子集,利用可能性相加原理,对专家意见进行了统计分析,得出综合性的意见。结果表明,利用伸缩性提供的丰富信息,可以较好地总结专家意见。基于几种模型的仿真可靠性分析结果,本文推荐可靠性最高的模型作为城市平房震害预测统计手段。     

Rupture segmentation and assessment of probabilities of seismic potential on the Xiaojiang fault zone

Spatial distribution of sources of strong and large earthquakes on the Xiaojiang fault zone in eastern Yunnan is studied according to historical earthquake data. 7 segments of relatively independent sources or basic units of rupture along the fault zone have been identified preliminarily. On every segment, time intervals between main historical earthquakes are generally characterized by “time-predictable” recurrence behavior with indetermination. A statistic model for the time intervals between earthquakes of the fault zone has been preliminarily established. And a mathematical method has been introduced into this paper to reckon average recurrence interval between earthquakes under the condition of having known the size of the last event at a specific segment. Based on these, ranges of the average recurrence intervals given confidence have been estimated for events of various sizes on the fault zone. Further, the author puts forward a real-time probabilistic model that is suitable to analyze seismic potential for individual segments along a fault zone on which earthquake recurrence intervals have been characterized by quasi-time-predictable behavior, and applies this model to calculate conditional probabilities and probability gains of earthquake recurring on the individual segments of the Xiaojiang fault zone during the period from 1991 to 2005. As a consequence, it has shown that two parts of this fault zone, from south of Dongchuan to Songming and from Chengjiang to Huaning, have relatively high likelihoods for strong or large earthquake recurring in the future. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 322–330, 1993.     

Internet-based applications for interrogating 50 years of data from the South African national water quality monitoring network

ABSTRACT

National and regional water quality monitoring networks have been operated in South Africa since the early 1970s. These originally had text-based inventories that were convenient for specialists who were familiar with the national networks and knew the locations of their sites of interest. However, within two decades the networks had expanded in geographical extent and variables monitored to such an extent that users needed spatial context in order to locate sites that fitted their information requirements. Mapping applications running on the Internet, such as Google Earth and Leaflet, form the foundation of a system for providing online inventories and summaries of the data available on the water quality database. The interfaces were constructed using available software, mainly ArcInfo and R. A recent concern is a decrease in the collection of water quality data, which is reducing the value of data summaries for water resource management.     

Seismic Hazard and Risk Assessment for Tulbagh,South Africa: Part I – Assessment of Seismic Hazard

In this part of our study the probabilistic seismic hazard analysis (PSHA) for Tulbagh was performed. The applied procedure is parametric and consists essentially of two steps. The first step is applicable to the area in the vicinity of Tulbagh and requires an estimation of the area-specific parameters, which, in this case, is the mean seismic activity rate, , the Gutenberg-Richter parameter, b, and the maximum regional magnitude, m_max. The second step is applicable to the Tulbagh site, and consists of parameters of distribution of amplitude of the selected ground motion parameter. The current application of the procedure provides an assessment of the PSHA in terms of peak ground acceleration (PGA) and spectral acceleration (SA). The procedure permits the combination of both historical and instrumental data. The historical part of the catalogue only contains the strongest events, whereas the complete part can be divided into several subcatalogues, each assumed complete above a specified threshold of magnitude. In the analysis, the uncertainty in the determination of the earthquake was taken into account by incorporation of the concept of `apparent magnitude'. The PSHA technique has been developed specifically for the estimation of seismic hazard at individual sites without the subjective judgement involved in the definition of seismic source zones, when the specific active faults have not been mapped or identified, and where the causes of seismicity are not well understood. The results of the hazard assessment are expressed as probabilities that specified values of PGA will be exceeded during the chosen time intervals, and similarly for the spectral accelerations. A worst case scenario sketches the possibility of a maximum PGA of 0.30g. The results of the hazard assessment can be used as input to a seismic risk assessment.     

Development and validation of a metallic haunch seismic retrofit solution for existing under‐designed RC frame buildings

The feasibility and efficiency of a seismic retrofit solution for existing reinforced concrete frame systems, designed before the introduction of modern seismic‐oriented design codes in the mid 1970s, is conceptually presented and experimentally investigated. A diagonal metallic haunch system is introduced at the beam–column connections to protect the joint panel zone from extensive damage and brittle shear mechanisms, while inverting the hierarchy of strength within the beam–column subassemblies and forming a plastic hinge in the beam. A complete step‐by‐step design procedure is suggested for the proposed retrofit strategy to achieve the desired reversal of strength hierarchy. Analytical formulations of the internal force flow at the beam–column‐joint level are derived for the retrofitted joints. The study is particularly focused on exterior beam–column joints, since it is recognized that they are the most vulnerable, due to their lack of a reliable joint shear transfer mechanism. Results from an experimental program carried out to validate the concept and the design procedure are also presented. The program consisted of quasi‐static cyclic tests on four exterior, ? scaled, beam–column joint subassemblies, typical of pre‐1970 construction practice using plain round bars with end‐hooks, with limited joint transverse reinforcement and detailed without capacity design considerations. The first (control specimen) emulated the as‐built connection while the three others incorporated the proposed retrofitted configurations. The experimental results demonstrated the effectiveness of the proposed solution for upgrading non‐seismically designed RC frames and also confirmed the applicability of the proposed design procedure and of the analytical derivations. Copyright © 2006 John Wiley & Sons, Ltd.     

Archaeoseismology: Methodological issues and procedure

Archaeoseismic research contributes important data on past earthquakes. A limitation of the usefulness of archaeoseismology is due to the lack of continuous discussion about the methodology. The methodological issues are particularly important because archaeoseismological investigations of past earthquakes make use of a large variety of methods. Typical in situ investigations include: (1) reconstruction of the local archaeological stratigraphy aimed at defining the correct position and chronology of a destruction layer, presumably related to an earthquake; (2) analysis of the deformations potentially due to seismic shaking or secondary earthquake effects, detectable on walls; (3) analysis of the depositional characteristics of the collapsed material; (4) investigations of the local geology and geomorphology to define possible natural cause(s) of the destruction; (5) investigations of the local factors affecting the ground motion amplifications; and (6) estimation of the dynamic excitation, which affected the site under investigation. Subsequently, a ‘territorial’ approach testing evidence of synchronous destruction in a certain region may delineate the extent of the area struck by the earthquake. The most reliable results of an archaeoseismological investigation are obtained by application of modern geoarchaeological practice (archaeological stratigraphy plus geological–geomorphological data), with the addition of a geophysical-engineering quantitative approach and (if available) historical information. This gives a basic dataset necessary to perform quantitative analyses which, in turn, corroborate the archaeoseismic hypothesis. Since archaeoseismological investigations can reveal the possible natural causes of destruction at a site, they contribute to the wider field of environmental archaeology, that seeks to define the history of the relationship between humans and the environment. Finally, through the improvement of the knowledge on the past seismicity, these studies can contribute to the regional estimation of seismic hazard.     

“THE END OF MODERN HISTORY”?*

ABSTRACT. The first half of the twentieth century marked both an end to confidence in human control of the earth and a prelude to the contemporary era of intense environmental concern after 1950. This conspectus of the environmental history/historical geography of the transitional years between 1900 and 1950 focuses on rising concerns over resource supplies and exploitation, particularly land settlement, timber supplies, soil erosion, and river-basin control. Conservation and the pervasiveness of ecological thinking and analogy form a strong underlying theme.     

Numerical Simulation of the 1918 Puerto Rico Tsunami

The Caribbean Sea region is well known for its hurricanes, and less known for tsunamis. As part of its responsibilities in hazard assessment and mitigation, the U.S.A. Federal Emergency Management Agency, and the Puerto Rico Civil Defense, funded a pilot study to perform a numerical simulation of the 1918 Puerto Rico tsunami, one of the most deadly in the region. As part of the study a review has been made of the tectonic and tsunamigenic environment around Puerto Rico, the fault parameters for the 1918 event have been estimated, and a numerical simulation has been done using a tsunami propagation and runup model obtained through the Tsunami Inundation Modeling for Exchange (TIME) program. Model results have been compared with the observed runup values all along the west coast of Puerto Rico.