大震下村镇建筑砌体结构的抗震性能数值分析

为探讨村镇建筑低层砌体结构在大震下的动力响应及损伤分布情况,基于农居结构性能实地调查与检测,在有限元软件ABAQUS中建立了不同抗震构造措施的砌体结构有限元模型,并进行结构动力特性及大震下弹塑性时程的分析,对比它们的自振特性参数、位移响应参数及损伤破坏形态。分析表明,低层砌体结构合理设置构造柱后结构自振周期略有减小,但振型不变;在弹性变形阶段构造柱能有效约束结构的动力位移响应,进入塑性变形后构造柱可提高砌体结构的耗能能力,但值得注意的是,结构刚度退化后构造柱会加剧纵横向抗侧刚度的不均衡性;低层砌体结构合理设置圈梁构造柱可有效抑制承重横墙的裂缝发展及楼屋盖发生支座失效破坏,且可以明显削弱结构的扭转效应。     

The principle of coupled stress release model and its application

ＴｈｅｐｒｉｎｃｉｐｌｅｏｆｃｏｕｐｌｅｄｓｔｒｅｓｒｅｌｅａｓｅｍｏｄｅｌａｎｄｉｔｓａｐｐｌｉｃａｔｉｏｎＪＩＥＬＩＵ１）（刘杰）ＤＡＶＩＤＶＥＲＥＪＯＮＥＳ２）ＬＩＭＡ１）（马丽）ＹＡＯＬＩＮＳＨＩ３）（石耀林）ＪＩＡＮＣＡＮＧＺＨＵＡ...     

Evaluation of ASCE 7 equations for designing acceleration‐sensitive nonstructural components using data from instrumented buildings

This study uses instrumented buildings and models of code‐based designed buildings to validate the results of previous studies that highlighted the need to revise the ASCE 7 F_p equation for designing nonstructural components (NSCs) through utilizing oversimplified linear and nonlinear models. The evaluation of floor response spectra of a large number of instrumented buildings illustrates that, unlike the ASCE 7 approach, the in‐structure and the component amplification factors are a function of the ratio of NSC period to the supporting building modal periods, the ground motion intensity, and the NSC location. It is also shown that the recorded ground motions at the base of instrumented buildings in most cases are significantly lower than design earthquake (DE) ground motions. Because ASCE 7 is meant to provide demands at a DE level, for a more reliable evaluation of the F_p equation, 2 representative archetype buildings are designed based on the ASCE 7‐16 seismic provisions and exposed to various ground motion intensity levels (including those consistent with the ones experienced by instrumented buildings and the DE). Simulation results of the archetype buildings, consistent with previous numerical studies, illustrate the tendency of the ASCE 7 in‐structure amplification factor, [1 + 2(z/h)] , to significantly overestimate demands at all floor levels and the ASCE 7 limit of to in many cases underestimate the calculated NSC amplification factors. Furthermore, the product of these 2 amplification factors (that represents the normalized peak NSC acceleration) in some cases exceeds the ASCE 7 equation by a factor up to 1.50.     

Seismic performance of buildings retrofitted with nonlinear viscous dampers and adjacent reaction towers

An effective strategy of seismic retrofitting consists of installing nonlinear viscous dampers between the existing building, with insufficient lateral resistance, and some auxiliary towers, specially designed and erected as reaction structures. This allows improving the seismic performance of the existing building without any major alteration to its structural and nonstructural elements, which makes this approach particularly appealing for buildings with heritage value. In this paper, the nonlinear governing equations of the coupled lateral‐torsional seismic motion are derived from first principles for the general case of a multistory building connected at various locations in plan and in elevation to an arbitrary number of multistory towers. This formulation is then used to assess the performance of the proposed retrofitting strategy for a real case study, namely, a 5‐story student hall of residence in the city of Messina, Italy. The results of extensive time‐history analyses highlight the key design considerations associated with the stiffness of the reaction towers and the mechanical parameters of the nonlinear viscous dampers, confirming the validity of this approach.     

Validation of the SCEC Broadband Platform simulations for tall building risk assessments considering spectral shape and duration of the ground motion

Earthquake simulation technologies are advancing to the stage of enabling realistic simulations of past earthquakes as well as characterizations of more extreme events, thus holding promise of yielding novel insights and data for earthquake engineering. With the goal of developing confidence in the engineering applications of simulated ground motions, this paper focuses on validation of simulations for response history analysis through comparative assessments of building performance obtained using sets of recorded and simulated motions. Simulated ground motions of past earthquakes, obtained through a larger validation study of the Southern California Earthquake Center Broadband Platform, are used for the case study. Two tall buildings, a 20‐story concrete frame and a 42‐story concrete core wall building, are analyzed under comparable sets of simulated and recorded motions at increasing levels of ground motion intensity, up to structural collapse, to check for statistically significant differences between the responses to simulated and recorded motions. Spectral shape and significant duration are explicitly considered when selecting ground motions. Considered demands include story drift ratios, floor accelerations, and collapse response. These comparisons not only yield similar results in most cases but also reveal instances where certain simulated ground motions can result in biased responses. The source of bias is traced to differences in correlations of spectral values in some of the stochastic ground motion simulations. When the differences in correlations are removed, simulated and recorded motions yield comparable results. This study highlights the utility of physics‐based simulations, and particularly the Southern California Earthquake Center Broadband Platform as a useful tool for engineering applications.     

Effect of irregular structural configuration on floor acceleration demand in hill‐side buildings

A suite of reinforced‐concrete frame buildings located on hill sides, with 2 different structural configurations, viz step‐back and split‐foundation, are analyzed to study their floor response. Both step‐back and split‐foundation structural configurations lead to torsional effects in the direction across the slope due to the presence of shorter columns on the uphill side. Peak floor acceleration and floor response spectra are obtained at each storey's center of rigidity and at both its stiff and flexible edges. As reported in previous studies as well, it is observed that the floor response spectra are better correlated with the ground response spectrum. Therefore, the floor spectral amplification functions are obtained as the ratio of spectral ordinates at different floor levels to the one at the ground level. Peaks are observed in the spectral amplification functions corresponding to the first 2 modes in the upper portion of the hill‐side buildings, whereas a single peak corresponding to a specific kth mode of vibration is observed on the floors below the uppermost foundation level. Based on the numerical study for the step‐back and split‐foundation hill‐side buildings, simple floor spectral amplification functions are proposed and validated. The proposed spectral amplification functions take into account both the buildings' plan and elevation irregularities and can be used for seismic design of acceleration‐sensitive nonstructural components, given that the supporting structure's dynamic characteristics, torsional rotation, ground‐motion response spectrum, and location of the nonstructural components within the supporting structure are known, because current code models are actually not applicable to hill‐side buildings.     

超高层建筑平面控制网竖向传递实践与研究

分析了超高层建筑平面控制网的建立及竖向传递的方法,介绍了数字正垂在测定超高层建筑倾斜偏差的具体应用,实现了用全站仪法和GPS法来检核控制网竖向传递的精度。     

Evaluation of building separation distance required to prevent pounding during strong earthquakes

Presented herein is an analytical procedure for evaluating the separation distance required between two buildings to prevent pounding during strong earthquakes. The procedure is based on equivalent linearization of non-linear hysteretic behaviour and application of the well-known CQC method of weighting normal mode responses. The numerical results obtained are compared with corresponding results obtained using the well-known SRSS and ABS methods. © 1997 John Wiley & Sons, Ltd.     

Seismic reliability assessment and the nonergodicity in the modelling parameter uncertainties

Modelling uncertainty can significantly affect the structural seismic reliability assessment. However, the limit state excursion due to this type of uncertainty may not be described by a Poisson process as it lacks renewal properties with the occurrence of each earthquake event. Furthermore, considering uncertainties related to ground motion representation by employing recorded ground motions together with modelling uncertainties is not a trivial task. Robust fragility assessment, proposed previously by the authors, employs the structural response to recorded ground motion as data in order to update prescribed seismic fragility models. Robust fragility can be extremely efficient for considering also the structural modelling uncertainties by creating a dataset of one-to-one assignments of structural model realizations and as-recorded ground motions. This can reduce the computational effort by more than 1 order of magnitude. However, it should be kept in mind that the fragility concept itself is based on the underlying assumption of Poisson-type renewal. Using the concept of updated robust reliability, considering both the uncertainty in ground motion representation based on as-recorded ground motion and non ergodic modelling uncertainties, the error introduced through structural reliability assessment by using the robust fragility is quantified. It is shown through specific application to an existing RC frame that this error is quite small when the product of the time interval and the standard deviation of failure rate is small and is on the conservative side.