发射光谱法测定区域化探样品中的Pb、Sn、Mo、V元素

采用发射光谱法测定区域化探样品中Pb、Sn、Mo、V元素,以焦硫酸钾、氟化钠、三氧化二铝和碳粉的混合物为固体缓冲剂,采用外加内标法以锗（Ge）作为内标元素,选择合适的分析线对,选取国家一级地球化学标准物质（GBW水系沉积物、土壤）平行测定（n=12次）.测试结果准确度达到规范要求,满足区域化探样品的检测要求.     

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.     

Magnetic measurements in electrical prospecting by resistivity methods

The electrical resistivity and induced polarization (IP) methods are widely used in geological mapping, prospecting and exploration of mineral deposits, engineering geology, hydrogeology, archaeology, and geotechnical and environmental applications. Historically, these methods have formed the basis of the electrical prospecting technique. In these methods, a DC or low-frequency AC electrical current is introduced into the earth through a grounded transmitter line. The measured quantity is the electric field. However, if the earth’s resistivity or chargeability changes horizontally, this change gives rise to an anomalous magnetic field, which is studied by the magnetometric resistivity (MMR) and magnetic induced polarization (MIP) methods, respectively. Along with advantages, some shortcomings are inherent in the MMR and MIP techniques. Apparently, the main drawback of these methods is that the magnetic fields of both the transmitter line wire and ground electrodes on the surface are several orders of magnitude greater than the anomalous magnetic field response. This introduces a significant “noise” to magnetic-resistivity data. We investigate the potential of using a circular electric dipole (CED) in magnetometric resistivity techniques. It has been found that the application of a CED, instead of a conventional transmitter line, dramatically enhances the signal-to-noise ratio.     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Effect of 2D spatial variability on slope reliability: A simplified FORM analysis

To meet the high demand for reliability based design of slopes, we present in this paper a simplified HLRF(Hasofere Linde Rackwitze Fiessler) iterative algorithm for first-order reliability method(FORM). It is simply formulated in x-space and requires neither transformation of correlated random variables nor optimization tools. The solution can be easily improved by iteratively adjusting the step length. The algorithm is particularly useful to practicing engineers for geotechnical reliability analysis where standalone(deterministic) numerical packages are used. Based on the proposed algorithm and through direct perturbation analysis of random variables, we conducted a case study of earth slope reliability with complete consideration of soil uncertainty and spatial variability.     

庐枞火山岩盆地南部拔茅山铜矿深部找矿潜力分析

位于庐枞火山岩盆地南部的拔茅山铜矿,是细脉带蚀变岩型脉状铜矿的代表。研究表明,其深部具有斑岩型铜矿的勘探潜力。为了进一步明确其深部找矿潜力,针对研究区斑岩型、热液型铜多金属矿的岩体、断裂、接触带等主要控矿因素,利用高精度磁法和可控源音频大地电磁测深(CSAMT)成果,分别对拔茅山岩体的分布、产状和深部形态及其与围岩的接触带特征进行了剖析。在此基础上,通过与沙溪斑岩铜矿地质、物探异常特征的类比,指明了研究区的找矿方向和有利找矿部位,为进一步找矿提供了思路和依据。     

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS), and the interaction with hydrate is very complicated. In this paper, the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS. Then, taking the typical submarine slope in the northern South China Sea as an example, four important factors affecting the stability of SHBS are selected, such as the degree of hydrate dissociation, the depth of hydrate burial, the thickness of hydrate, and the depth of seawater. According to the principle of orthogonal method, 25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method. By means of the orthogonal design range analysis and the variance analysis, sensitivity of influential factors on stability of SHBS are obtained. The results show that the degree of hydrate dissociation is the most sensitive, followed by hydrate burial depth, the thickness of hydrate and the depth of seawater. Finally, the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth, and the numerical simulation for specific submarine slope is carried out, which indicates the existence of critical burial depth.     

Effect of loading duration on uncertainty in creep analysis of clay

Some studies suggest that creep parameters should be determined using a greater quantity of creep test data to provide more reliable prediction regarding the deformation of soft soils. This study aims to investigate the effect of loading duration on model updating. One‐dimensional consolidation data of intact Vanttila clay under different loading durations collected from the literature is used for demonstration. The Bayesian probabilistic method is used to identify all unknown parameters based on the consolidation data during the entire consolidation process, and their uncertainty can be quantified through the obtained posterior probability density functions. Additionally, the optimal models are also determined from among 9 model candidates. The analyses indicate that the optimal models can describe the creep behavior of intact soft soils under different loading durations, and the adopted method can evaluate the effect of loading duration on uncertainty in the creep analysis. The uncertainty of a specific model and its model parameters decreases as more creep data are involved in the updating process, and the updated models that use more creep data can better capture the deformation behavior of an intact sample. The proposed method can provide quantified uncertainty in the process of model updating and assist engineers to decide whether the creep test data are sufficient for the creep analysis.     

基于突变级数法的页岩气探采综合环境影响评价研究

为缓解能源紧张,页岩气作为储量丰富的非常规能源在我国正大力开发,而我国页岩气开发起步较晚,受管理与技术限制,页岩气开发造成的综合环境影响问题还得不到有效解决。针对页岩气开发存在的环境问题,本文基于我国页岩气开发现状,借鉴美国页岩气开发的成功经验,从自然环境与人文环境两方面对页岩气开发综合环境影响因素进行分析,建立了页岩气开发综合环境影响评价指标体系;同时为降低评价过程主观因素的影响,简化评估过程,本文引入突变级数法建立了页岩气开发综合环境影响评估模型,运用数值替换方法区分页岩气开发综合环境影响等级。最后将评价体系与评估模型应用到实际案例中,得到的评价结果与实际情况基本符合,为页岩气开发项目的综合环境评价提供了很好的理论依据。     

改进的无网格法及其在冻土区桩基温度场中的应用

采用带权正交基函数对传统的无网格法中的基函数进行了改进,避免了计算过程中可能出现的矩阵不可逆情况,而且编程容易实现且计算效率高。并将其应用到冻土区桩基包括了热传导和相变潜热的温度场中,同时考虑了混凝土水化热释放对桩周冻土的影响,将计算结果和有限元计算结果及现场实测数据进行了比较分析,从趋势和最大数值看都反映了实测曲线的趋势,又把不同深度处桩侧和不同桩径处温度随时间的变化规律计算结果和有限元计算结果做了对比,都验证了该方法的可行性和优越性。