南沙群岛海域长腹剑水蚤(Oithona spp.)的种类组成、数量分布及其与环境因子的关系

中小型桡足类是海洋食物网中重要的中间环节,在碳循环里细菌碳和藻类碳向高营养级转化的过程中扮演重要角色。本文通过分析2013年3—4月、6—7月、9—10月和11—12月南沙群岛海域(111°30′E—112°30′E,4°30′N—11°30′N)的生态环境调查数据,对长腹剑水蚤属(Oithona)的种类组成、数量分布及其与环境因子的关系进行了研究。结果表明:(1)南沙群岛海域共出现长腹剑水蚤15种(包括1个未定种),其中线长腹水蚤(Oithona linearis)、粗长腹剑水蚤(O.robusta)和长刺长腹剑水蚤(O.longispina)为南沙群岛海域首次记录,长腹剑水蚤属种类组成沿水深变化的现象较为明显,该属虽然在南沙群岛海域广泛分布,但单种的出现频率较低,其种类出现的季节性较强;(2)南沙群岛海域的长腹剑水蚤可以划分为常见广布组群Ⅰ和低频组群Ⅱ;(3)长腹剑水蚤年均栖息密度为30ind./m3,季节变化呈单峰型,秋季最高、冬季最低,高数量区主要出现在受南沙西部沿岸流和东部沿岸流影响的近岸海域;(4)在0—750m水深范围内,长腹剑水蚤数量沿水深梯度的垂直变化明显,呈现由浅至深数量明显减少的趋势,长腹剑水蚤主要集中分布在0—75m的水层中,75—500m数量急剧降低至最低后,在500—750m基本维持不变;(5)GAM分析表明,纬度、海水温度、盐度和叶绿素a浓度对长腹剑水蚤数量均有影响,以纬度的影响最为显著,其中长腹剑水蚤属最适温度为28.6—29.2℃,最适盐度为32.6—33.2,最适叶绿素a浓度为5—10μg/L;(6)长腹剑水蚤属更适栖息于低温和低盐,且受沿岸流影响的环境中。因此,其数量分布的季节变化与季风驱动的沿岸流势力强弱密切相关。     

Investigation of a longfin inshore squid's swimming characteristics and an underwater locomotion during acceleration

In the present study, locomotion of a real longfin inshore squid (Doryteuthis pealeii) was numerically investigated. Geometry of a real squid was obtained using computed tomography (CT) images. In addition to a two-dimensional axisymmetric squid model, a modified squid model with no cavities around her head and an ellipse shaped model were generated with a fineness ratio (the ratio of body length to maximum body diameter) of 7.56. These numerical models were exposed to an acceleration with two different velocity programs. Added mass and basset forces on bodies were calculated during acceleration of the squid models starting from rest. Pressure and viscous drag forces were also calculated due to pressure variation along the squid models and friction on the surface of the models. The effect of a nozzle diameter on jet velocities and propulsive efficiency at all bodies were evaluated when time dependent velocity profiles (from 0 to 10 m/s in 0.5 and 1 s time durations) were set for the inlet of computational domain. The modified squid model required least thrust force during acceleration phase of time dependent velocity profile compared to the other models while the 0.02 m nozzle diameter provided largest propulsive efficiency for all models.     

Paleo-redox depositional conditions inferred from trace metal accumulation in two Cretaceous-Paleocene organic-rich sequences from Central Egypt

Cretaceous-Paleocene organic-rich sediments in Egypt occur as an east-west trending belt extending from the Quseir-Safaga district (Red Sea) to the Kharga-Dakhla (Western Desert) region. They are associated with the Duwi Formation (phosphate-bearing) and the overlying Dakhla Formation (deeper epicontinental shale/marl). This study aims to reconstruct the paleo-redox conditions during deposition of these thermally immature organic-rich sediments using carbon-sulfur-iron systematics and trace metal proxies in two cores, one each from the Quseir and Abu Tartur areas. Paleoproductivity, based on P content, seems to have been higher in the Quseir section than in the Abu Tartur section. The Quseir section also records a relatively greater occurrence of anoxic conditions during the accumulation of these sediments than the Abu Tartur section. This difference is indicated by its markedly higher total organic carbon (TOC) content as well as higher contributions of redox-sensitive and sulfide-forming metals (Mo, U, Ni, V, and Co). A weak correlation exists between S and TOC, and a positive S intercept (>1) was observed in most of the rock units of the study sections. A high consistency between the TOC-S-Fe relations and trace metals findings was found. The uppermost Duwi and the lowermost Dakhla strata, which have the highest TOC and represent a maximum sea transgression during the Late Cretaceous, have the highest contents of redox-sensitive trace metals. The carbonate-dominated transgressive Baris and Beida members of the Dakhla Formation record relatively stronger oxygen-depleted conditions during their accumulation than others, which led to relatively higher TOC contents and redox-sensitive metal accumulations. A scenario for the environmental conditions that existed during the deposition of these organic-rich successions, based on compiled trace metals and TOC-S-Fe implications, is reconstructed here.     

Origin of the Breno and Esino dolomites in the western Southern Alps (Italy): Implications for a volcanic influence

The Esino Limestone of the western Southern Alps represents a differentiated Ladinian-Lower Carnian (?) carbonate platform comprised of margin, slope and peritidal inner platform facies up to 1000 m thick. A major regional subaerial exposure event lead to coverage by another peritidal Lower Carnian carbonate platform (Breno Formation). Multiphase dolomitization affected the carbonate sediments. Petrographic examinations identified at least three main generations of dolomites (D1, D2, and D3) that occur as both replacement and fracture-filling cements. These phases have crystal-size ranges of 3–35 μm (dolomicrite D1), 40–600 μm (eu-to subhedral crystals D2), and 200 μm to 5 mm (cavity- and fracture-filling anhedral to subhedral saddle dolomite D3), respectively.The fabric retentive near-micritic grain size coupled with low mean Sr concentration (76 ± 37 ppm) and estimated δ¹⁸O of the parent dolomitizing fluids of D1 suggest formation in shallow burial setting at temperature ∼ 45–50 °C with possible contributions from volcanic-related fluids (basinal fluids circulated in volcaniclastics or related to volcanic activity), which is consistent with its abnormally high Fe (4438 ± 4393 ppm) and Mn (1219 ± 1418 ppm) contents. The larger crystal sizes, homogenization temperatures (D2, 108 ± 9 °C; D3, 111 ± 14 °C) of primary two-phase fluid inclusions, and calculated salinity estimates (D2, 23 ± 2 eq wt% NaCl; D3, 20 ± 4 eq wt% NaCl) of D2 and D3 suggest that they formed at later stages under mid-to deeper burial settings at higher temperatures from dolomitizing fluids of higher salinity, which is supported by higher estimated δ¹⁸O values of their parent dolomitizing fluids. This is also consistent with their high Fe (4462 ± 4888 ppm; and 1091 ± 1183 ppm, respectively) and Mn (556 ± 289 ppm and 1091 ± 1183 ppm) contents, and low Sr concentrations (53 ± 31 ppm and 57 ± 24 ppm, respectively).The similarity in shale-normalized (SN) REE patterns and Ce (Ce/Ce*)_SN and La (Pr/Pr*)_SN anomalies of the investigated carbonates support the genetic relationship between the dolomite generations and their calcite precursor. Positive Eu anomalies, coupled with fluid-inclusion gas ratios (N₂/Ar, CO₂/CH₄, Ar/He), high F⁻ concentration, high F/Cl and high Cl/Br molar ratios suggest an origin from diagenetic fluids circulated through volcanic rocks, which is consistent with the co-occurrence of volcaniclastic lenses in the investigated sequence.     

A novel method to estimate mineral compositions of mudrocks: A case study for the Canadian unconventional petroleum systems

The mineral composition of mudrocks is an essential attribute in controlling the reservoir quality of unconventional petroleum systems. The present study introduces a semi-quantitative method to estimate mineral phases of mudrocks in various Canadian unconventional hydrocarbon systems using total elemental analysis (inductively coupled plasma-mass spectrometry (ICP-MS)) and Rock-Eval data (total organic carbon (TOC) and mineral carbon (MinC)).This method involves statistical analysis based on a sound knowledge of hydrocarbon source rock inorganic geochemistry. The workflow can be divided into four steps: (i) converting major elements (Si, Al, Fe, K, Na, Ca, Mg, Ti, and P) to their oxides, (ii) inferring modes of occurrence of elements using statistical analysis of geochemical data (major elements, TOC, and MinC), (iii) identifying the mineral types (oxide, aluminosilicates, carbonates, sulfide, and phosphate) according to elemental occurrences and calculating mineral phase concentrations, and (iv) verifying the results by comparing to XRD data on selected samples. The results, especially for brittle minerals such as quartz, carbonates (e.g. calcite, dolomite, and ankerite), and pyrite, show that the estimated mineral compositions correspond closely and consistently with measured mineralogy obtained from XRD. This method takes advantage of bulk geochemical data already available for hydrocarbon potential and chemostratigraphic studies, without devoting additional samples and cost for XRD analysis.     

高等级海况条件下移动式海上基地动力响应分析

针对半潜式超大型浮式结构中典型的移动式海上基地(Mobile Offshore Base,MOB)在高等级海况下的动力响应问题展开研究。在MOB结构"刚性模块-柔性连接构件(Rigid Modules and Flexible Connectors,RMFC)"模型的前提下,根据动力学基本原理,经理论推导并计算得到MOB分别在6、7、8级海况的随机波激励下,其上各模块的动力响应位移结果。详细分析了MOB结构同一模块在不同海况条件下的动力响应位移随浪向角及连接构件刚度的变化规律。研究成果可为半潜式超大型浮式结构动力响应研究及结构优化设计提供一定的技术支撑。     

高频地波雷达海杂波背景下的船只目标检测研究进展

针对海杂波对高频地波雷达目标检测的干扰问题,分目标处于海杂波谱区之内和之外两种情况综述了海杂波背景下的目标检测方法。对于海杂波内目标检测的难题,介绍了一种基于现场海态同步观测信息的检测新思路以及初步验证结果。对国内外相关研究进展的归纳总结和新思路的提出,为提出更加有效的海杂波干扰下的目标检测方法提供了重要的参考。     

南海中尺度涡强度的季节和年际变化分析

为了研究南海中尺度涡强度的季节和年际变化规律,利用Matlab提取50 a(1958~2007年)简单海洋资料同化(Simple Ocean Data Assimilation,SODA)月平均数据集中流场和海表面高度场数据,应用一个涡旋自动探测算法对南海中尺度涡初始生成位置进行分析,并分析了海表面高度异常均方根值的季节变化和年际变化。结果表明:50 a里南海中尺度涡主要分布在吕宋岛西北海域、吕宋岛西南海域和越南以东广大海域,秋、冬季中尺度涡能量较高,春季中尺度涡最弱,中尺度涡强度高值区年际变化明显。从季节变化上看,海面高度异常均方根春、夏季最小,秋冬季最大;从年际变化上看,与同时期Nino3指数有显著负相关,周期大约为3 a。     

长江口及其邻近海域叶绿素a分布特征及其与低氧区形成的关系

于2013年3月和8月研究了长江口及其邻近海域叶绿素a的分布特征,并对环境因子和长江冲淡水对浮游植物生物量分布的影响进行了探讨。结果表明,叶绿素a浓度在丰水期较高,平均值为5.18μg/L,最高值达32.05μg/L,现场海水出现变色现象;与同期历史资料对比分析,发现该海域叶绿素a浓度呈现出波动增长趋势。丰水期与枯水期叶绿素a的相对高值区均位于冲淡水的中部,122.5°E~123°E之间;丰水期在调查海域出现溶解氧低值区与低氧区,最低值仅为0.64 mg/L;发现低氧区出现位置北移、面积扩大和溶解氧最低值下降的趋势。底层溶解氧低值区分布与表层叶绿素高值区大致吻合,表明低氧现象与表层浮游植物的生长和现存量密切相关,在跃层存在的水体中表层浮游植物的大量繁殖易造成底层低氧区的出现。     

Optimal routing for waste collection: a case study in Singapore

ABSTRACT

To collect and dispose growing amounts of municipal solid waste (MSW) changed to be a hot topic along with the rapid urbanization in past decades. Cities are more and more dependent on the incineration instead of landfilling due to the cost-efficiency and environmental concerns. Considering the limited number of incineration plants and complicated situation of transportation in both spatial and temporal dimensions in different cities, the optimal routing for waste collection turns to be meaningful research topic. In this research, the ant colony optimization (ACO)-based multi-objective routing model coupled with min-max model and Dijkstra’s algorithm is proposed to address the question of which route to take from these waste-generating points to the target incineration plant(s) considering travel time, accident probability (black spots), and population exposure, so as to support the routing decision-making. The model is successfully implemented in Singapore and the effectiveness of the model has also been justified. Besides, few limitations of this research have also been discussed, some of which would also be the future directions of our research, especially the design and integration of a web-based routing decision-making support system.