大厂矿区坑道磁测找矿试验

大厂矿区一条长1．5km的运输巷道内进行了高精度磁测找矿试验，并进行了地质钻探验证。结果表明：在将局部磁性干扰压抑后，所获相对磁异常是可以取得找矿效果的。     

Studies on wind environment around high buildings in urban areas

High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.     

“探宝号”船可变阵列震源的实现及应用

2001年，广州海洋地质调查局对“探宝号”船原有震源更新升级为阵列可变的BOLT震源系统。随着更新改造工程的成功，该船已成为具备承担高分辨率、常规、低频深水油气地震勘探的多功能地震调查船。本文介绍了地震勘探震源的基本工作原理以及三种阵列的分布、波形、频谱等特性。     

煤层陷落柱高分辨率地震探测技术

在华北、华东及西北地区近20多个煤田的石炭二叠系中，普遍存在着因煤系地层基底厚层灰岩古岩溶塌陷形成的煤层陷落柱，尤以山西省西山及汾河沿岸的煤田、河北省太行山中段的煤田更为普遍。煤层陷落柱发育形态分为圆锥形、筒形、斜塔形、不规则形等特点，应用高分辩地震勘探技术，根据陷落柱发育区反射波同相轴中断、扭曲、能量变弱、连续性变差、分叉合并或圈闭、产状突变等特征，可有效地探测其空间位置及形态。     

Geotechnical Properties of Low Calcium and High Calcium Fly Ash

In this paper, a comparative study has been made for physical and engineering properties of low calcium and high calcium Indian fly ash. The grain size distribution of fly ash is independent of lime content. Fly ash particles of size >75 μm are mostly irregular in shape whereas finer fractions are spherical for low calcium fly ash. For high calcium fly ash, chemical and mineralogical differences have been observed for different size fractions. Compared to low calcium fly ash, optimum moisture content is low and maximum dry density is high for high calcium fly ash. Optimum moisture content is directly proportional and maximum dry density is inversely proportional to the carbon content. The mode and duration of curing have significant effect on strength and stress–strain behavior of compacted fly ash. The gain in strength with time for high calcium fly ash is very high compared to that of low calcium fly ash due to presence of reactive minerals and glassy phase.     

江苏丰、沛、铜地区高氟地下水成因探讨

通过该区太古界一新生界氟的地层地球化学剖面及岩浆岩和土壤中氟的丰度的研究,论证了该区为一高氟的地球化学区。根据重矿物对比研究和地貌分析,阐明了泰沂隆起区太古界和元古界的高氟古老岩系为该区土壤沉积物源,黄河多次泛滥堆积（粘土矿物对氟的吸附）对土壤氟起了叠加富集的作用。研究揭示该区土壤水溶氟较高,经降水淋滤和浸取作用氟转入地下水,并在凹陷区或河间洼地中聚集,水体停泄、蒸发浓缩形成高氟地下水区。     

天然闪锌矿原位高温X射线衍射研究

对天然闪锌矿进行了原位高温X射线衍射实验研究,结果表明：闪锌矿受热膨胀,27～675℃温度范围内其膨胀系数为25.61×10-6℃-1;随着温度的升高,在543℃时产生中间物相Zn3O（SO4）2,并分解产生红锌矿ZnO;在797℃时中间物相完全消失,同时出现尖晶石结构的ZnFe2O4;加热至1160℃时的产物为ZnO和ZnFe2O4。实验表明,天然闪锌矿的热改性可产生一定比例的红锌矿（ZnO）,其与闪锌矿一起形成二元复合半导体。在光的激发下,该半导体体系产生的光生载流子由一种半导体注入另一种半导体,降低了光生电子-空穴对的复合几率,提高其光催化活性。本文的研究可为热改性提高天然闪锌矿光催化活性提供理论依据。     

Formation Mechanism of High Quality Marine Source Rocks—Coupled Control Mechanism of Geological Environment and Organism Evolution

High quality marine source rock (HQMSR) is the key prerequisite for medium to large hydrocarbon accumulations. However, the forming mechanism remains unclear. On the basis of the in-vestigation for the geodynamic setting of the Middle-Upper Yangtze during the Early Cambrian in dif-ferent spatial scales and the analysis of trace elements, the main controlling factors of the development of high quality marine source rock are discussed, with specific consideration of the burial rate of the organic matter. The ...     

高放废物地质处置库花岗岩体预选研究

简要介绍了应用遥感技术结合地质研究,优选高放废物地质处置库花岗岩体的思路和方法。以北山外围地区为例,通过遥感数据处理,遥感影像解译,岩体地质特征分析,岩体预选准则的建立,在野外勘查的基础上,预选了若干有利的花岗岩体。为优选高放废物地质处置库场址提供决策依据。     

碳酸盐预分离-紫外脉冲荧光法快速测定高硬度地下水中微量铀

建立了碳酸盐预分离-紫外脉冲荧光法快速测定高硬度地下水中微量铀的方法。试验发现,预先向20.00mL高硬度水样中加入70mg·mL~(-1)的碳酸钠溶液1.20mL,将大部分共存的Ca~(2+)和Mg~(2+)以碳酸盐沉淀的形式与UO_2(CO_3)_2~(2-)有效分离后,应用紫外脉冲荧光法测量铀浓度,不但溶液保持澄清,pH值也可保持在7~9的约束范围之内。该预处理程序简单快速,测量结果准确可靠。方法的检出限为0.02μg·L~(-1),全程加标回收率在99%~101%之间,测量结果的相对标准偏差(RSD)小于5%。