Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

石榴石橄榄岩的熔融实验及其地质意义

在20×10~9Pa和25×10~9Pa条件下,对石榴石橄榄岩进行的14次高温高压熔融实验研究表明,在1600℃时石榴石橄榄岩开始熔融(初熔),熔体中的SiO_2>70％,Na_2O+K_2O>8％,类似于A型花岗岩成分。本实验为地幔花岗岩的成因提供了证据。     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

几丁糖酯原料药稳定性研究

该文建立高效凝胶渗透色谱法 (HPGPC) ,明胶比浊法 ,氧瓶燃烧法三种分析方法考察海洋硫酸多糖药物几丁糖酯的稳定性 ,采用这三种方法分别考察几丁糖酯原料药在高温、高湿、强光照射及加速条件下分子量及分布宽度、样品中硫酸根含量及样品含量的变化情况。结果表明 :三种方法均适用于几丁糖酯的稳定性考察 ,几丁糖酯在上述影响因素条件下稳定性良好     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.     

高分辨率遥感技术在厦门海湾生态环境调查中的应用

对于局部区域研究，高分辨率卫星遥感及其影像的智能化处理技术是获取信息的新手段．本文以IKONOS遥感影像在厦门海湾的应用为例，探讨高分辨率遥感卫星影像应用于海湾生态环境调查与分析的应用技术．通过分析高分辨率影像地物特征，提出高分辨率遥感影像的重要处理技术：采用不同缩放尺度进行分类和利用空间特征及纹理结构进行专题信息提取。     

桶形基础平台三维有限元稳定性分析

以我国第一座桶形基础采油平台工程实例为原型，采用三维有限元计算方法对桶形基础稳定性分析。平台在波浪、风等荷载作用下，其稳定性不仅与平台的整体结构有关，而且与桶形基础及其周围土体相互作用相关。在计算中，利用薄层摩擦单元模拟土与结构间的相互作用，取得了很好的效果。分析结果表明桶形基础采油平台在设计条件下运行是较为稳定的。     

Numerical simulation of solitary wave scattering by a circular cylinder array

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.     

Description of the post larva of star pipefish,halicampus punctatus (syngnathidae, gasterosteiformes) first found in the southwestern east sea, Korea

Larval specimens ofHalicampus punctatus were collected off Ulsan and Uljin in December 2002 (three specimens) and off Ulsan in December 2003 (one specimen). These specimens are characterized by the following morphological characteristics: rings, 14 + 35 = 49; subdorsal rings, 1 + 3 = 4; dorsal fin rays, 19 – 20; pectoral fin rays, 14 – 15; anal fin rays, 9; head length (HL), 5.8 – 6.7 in the standard length; snout length, 1.9 in HL; snout depth, 3.7 – 5.2 in snout length. The number of caudal fin rays 9 is less than those of the other species in the same genus 10. Wide stripe bands composed of small pigments are shown in the trunk and the tail. Melanophores are not found in the dorsal fin, the pectoral fin, and the anal fin except the caudal fin. The supraoccipital crest is on the head. The frontal ridge is on the dorsal side of front trunk. The blanched ridges on the opercular are fused with a main ridge like a tree branch. A few branched ridges that are small and narrow on the trunk and the tail are fused with the main ridges. We report these specimens as the first record in Korea and name them ‘Byeol-silgo-ki’ in Korean.     

The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.