Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

Acoustic plane-wave scattering from a rough surface over a random fluid medium

Acoustic plane-wave scattering from a rough surface overlying a fluid half-space with a sound-speed distribution subject to a small random variation is considered. Under the assumption that the surface roughness and medium randomness are statistically independent, the scattered field may be derived by first solving for the mean field in the medium, and then incorporating with boundary-perturbation method to obtain the total mean field and the power spectral density of the scattered field. The employed algorithm is compatible to the analysis available in the existing literature so that the formulations are conveniently integrated. The results for the power spectral density have shown that the effects of medium inhomogeneities on the rough surface scattering are limited in a spectral regime where the scattered components have shallow grazing angles. The distribution of the power spectral density over the space is primarily governed by the power spectrum and correlation lengths of the rough surface.     

地震勘探在不同地质条件下的新应用

20世纪末，地震勘探技术在油气勘探、煤田勘探、工程勘探等多方面的应用都有了突飞猛进的发展。总结了近年来地震勘探在岩性、沉积相、构造体系等不同地质条件下的应用实例，用以说明地震勘探的多用性及其强大的生命力。     

1999年以来台湾及邻近海域7.5级以上强震前的条带现象

中国台湾地区地处欧亚板块与菲律宾海板块之间,地震活动频繁．本文报道了 我国台湾地区及其邻近海域1985～2002年间5．5级以上地震的条带内外频度比分 布,并着重研究了1999—2002年中发生的3次7．5级以上地震前的条带现象．其结 果表明:台湾地区近期发生的3次7．5级以上大地震前,5．5级以上地震呈条带分 布．这些条带符合条带内地震个数Nin≥6的条件,符合条带内、外频度比Nin／(Nin Nout)≥75％的条件,也符合条带长宽比大于5的要求,只是与板内地震条带相比,条 带的长度较短．     

16米风化砂回填地基的深层振密加固

结合北方某重力式深水 ( -1 6.0 m)码头沉箱后壁 1 4.5 m范围的回填风化砂经深层振密处理这一工程实例 ,介绍了回填砂振密的技术要求、施工工艺和方法及振密效果的检测。同时对施工与检测中的某些技术问题提出了自己的看法。     

悬对沙Mellor-Yamada海洋边界层模型计算结果的影响

为了分析海洋水体垂向水流紊动及紊动交换情况而采用了一维的海洋边界层模型(Mellor-Yamada)并利用数值实验的方法对悬沙、盐度、温度等数据进行分析。原模型未将悬沙考虑在内，本文试将它引入进去探讨由于它的存在对紊动混合特性的影响。2000年4月，Mellor将最初的模型引入了依赖于Richardson数的紊动动能耗散率。本文通过比较具有悬沙和不具有悬沙两种情况下的速度、温度和盐度垂向分布随时间的变化，分析讨论由于悬沙的存在所引发的密度层化对紊动混合作用的影响，并发现悬浮泥沙抑制了部分模拟时间的紊动混合作用。     

无机碳与雨生红球藻(Haematococcus pluvialis)细胞调节物质

以单细胞雨生红球藻为材料，采用酸碱滴定和CO2加富通气培养微藻的方法，对旧液中HCO3^-和CO3^2-浓度变化以及对红球藻细胞生长的影响进行了研究。结果表明，旧液具有限制红球藻细胞生长和诱导细胞转化的作用。同时，旧液中无机碳离子浓度明显高于新液。培养液中富含CO3^2-时，各细胞数量与CO3^2-浓度呈正相关，相关系数为0．88。溶液中仅有HCO3^-时，各细胞数与HCO3^-浓度也呈正相关性。因此，排除了CO3^2-和HCO3^-作为旧液中的调节物质，限制红球藻细胞生长和诱导细胞转化的可能性。旧液乙酸乙酯提取物生物检测实验表明，在粗提取物中有降低细胞增长和诱导细胞转化的活性，表明调节物质能溶于有机相，也反过来证实无机碳离子不是旧液中的调节物质。DNA含量和倍性分析结果表明，红球藻游动细胞DNA复制可以加倍后不经过原生质分裂就可以再次进行，因此推测旧液中的调节物质对原生质分裂过程产生抑制作用，而不对DNA复制过程产生抑制作用。     

进入渤海的热带气旋路径特点分析

热带气旋是夏季影响渤海的灾害性天气系统之一。其影响路径主要有三类，各类路径在影响时前期中高纬500hPa高空环流形势及夏季西太平洋副热带高压特征指数有显著差异。     

地层学的发展推动油气地质理论研究的进步

自上个世纪50年代以来,地层学经历了彻底的变革,逐渐由“相模式”、“沉积体系”、“地震地层学”发展到目前的“层序地层学”,形成高分辨率层序地层学和事件地层学的理论体系和研究方法。文章围绕层序地层学、高分辨率层序地层学基本方法及理论体系,与含油气系统相关关系进行了讨论。     

北部湾三维风生流及密度流模拟

将Casulli差分格式引入三维物理海洋模型计算，模拟了北部湾风生流及密度流。模拟结果表明，夏季西南季风在北部湾导致一个顺时针环流，夏季海水密度梯度导致一个逆时针方向的环流，密度流明显强于风生流；冬季东北寒潮导致一个逆时针环流。模拟结果不支持北部湾夏季为一顺时针环流、冬季为逆时针环流的传统结论，而支持终年为逆时针环流的观点。