高放废物处置库天然类比及其有关的地球化学问题

介绍了高放废物处置库天然类比研究的主要内容,重点阐述了类比研究中涉及的地球化学问题,包括核素溶解度和化学形态研究、核素迁移速率研究、核素迁移影响因素研究,并总结相关问题研究取得的成果和认识.     

三峡库区高切坡致灾因素及防护对策——以重庆市万州区为例

三峡库区百万移民的搬迁建设导致大量高切坡的形成。未及时治理或治理不当的高切坡,不同程度地发生破坏,影响了人们的正常生活,甚至引发了地质灾害。因此,科学认识及治理高切坡十分必要。重庆市万州区高切坡主要有风化及差异风化、崩塌和土体滑塌等破坏形式。影响破坏的因素主要为工程地质条件、气候及时间效应。针对高切坡不同的破坏形式,以安全、经济及环境和谐的人文理念作为设计指导思想,充分论证了高切坡的防护方案,即：削坡、排水以及格构防护较适合万州区高切坡的防护。这些措施,既能很好地解决高切坡的防护问题,又能兼顾环保、降低造价。研究结果可以作为三峡地区高切坡类地质灾害防护设计的参考。也可为其它流域类似问题借鉴。     

土壤吸湿-湿过程中水力传导度的拟合研究

非饱和含水介质在吸湿和脱湿的不同过程中,水力传导度随介质含水率的变化规律是不同的。本文选取大沽河流域两种代表性砂土,对其吸湿-脱湿两个过程分别进行试验观测,并使用VanGenuchten—Mualem模型对其吸湿-脱湿过程进行水力传导度的拟合。研究结果表明：砂土在吸湿过程的非饱和水力传导度与脱湿过程的非饱和水力传导度大小并不相同,在含水率相同的情况下,吸湿过程的水力传导度要比脱湿过程大,在含水率较低时（小于15％）相差可达1个数量级。     

邹平火山岩盆地铜矿地质成因地球物理特征探讨

邹平铜矿处于齐河-广饶深大断裂带南部的邹平火山岩盆地中,形成于破火山口火山通道充填的石英正长闪长岩岩颈中央上部,包括伟晶岩型铜矿和细脉浸染状斑铜矿床两种类型。前者矿体较小,但品位高;后者品位较低,但规模中等。含矿石英正长闪长岩等密度小、磁性弱,故在火山岩系中呈现高背景重力场上的重力低和杂乱高磁场背景中的低负异常,即“重磁同低”,且高极化。重磁同低异常区和高极化率异常带,是本区寻找铜矿的有利部位。     

小波变换在遥感图像上矿区空间定位方面的分析与应用——以鄂东南铁矿矿区为例

随着社会的发展,人们对自然地物的影响越来越显著,大量地改变了地表的状况,在遥感图像上则表现为灰度值变化剧烈,其中的纹理信息发生改变.在频率域上说,人工改变的区域部分的高频成分比其他区域部分要丰富很多,小波变换能够有效地将其中的高频信息提取出来,用假彩色分割图将其中的异常值明显地表示出来.湖北大冶的铁山矿区分布着六大露天矿区,地表开挖范围广,影响程度大,以该地区为例,分析小波变换在遥感图像上矿区空间定位方面的应用.使用本文介绍的方法处理效果比较明显.矿区位置的确定还需要参考断层分布信息,这意味着使用小波变换进行处理的方法具有一定的局限性.     

高地震区公路隧道地震动力响应分析

基于土一结构相互作用理论,对高地震区一实际重大工程的公路隧道洞口段结构进行了抗震计算,得到了衬砌结构各控制点的位移、加速度及内力响应规律。结果表明：在人工合成地震波条件下,衬砌墙脚、拱腰为抗震薄弱位置;结构的加速度波形与输入波形相似;这些结果为抗震设计提供了一些依据。     

Regional conductance map of Andaman and Nicobar region

To image the electrical conductivity distribution, fluxgate magnetometers are operated at five sites in Andaman and Nicobar region. Transfer functions are estimated for the period range 8–128 min, from nighttime transient geomagnetic variations, using robust regression analysis. The observed induction arrows in Andaman Islands are found to point towards east despite deep sea located towards its west. This indicates that fore-arc basin (Andaman–Nicobar deep) is more conducting than the region of outer non-volcanic Island arc.Thin sheet model requires the conductance of 10,000–35,000 S (with increase conductivity towards the south) for explaining the observed induction pattern. The observed induction pattern at Andaman–Nicobar stations can be explained in terms of high conducting Cretaceous–Tertiary sediments filling the Andaman–Nicobar deep. High conductivity over Invisible bank has been attributed to the partial melts/volatile fluids derived from the subducting Indian plate that are intruding into the eastern margin of fore-arc basin through the West Andaman Fault (WAF).The induction pattern at Great Nicobar station (Campbell Bay) may be related to the highly conducting sediments filling the Mergui basin along with mafic intrusions. Also crustal transition occurs below the Mergui Terrace at the Malayan coast contributing to the enhanced conductivity anomaly.     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

努力提高三维地震勘探精度，为西部煤炭工业做出新贡献

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!     

200～300N高强度合成金刚石及其在钻探中的应用

对会“打滑”地层,国内外均为难题,新研究的技术是：（１）用特殊的新构思,运用内设备,压制出可批量２供应的高强度金刚石,这种高强度金刚石可承受比目前高得多的钻压;（２）运用强力钻进的配套技术,用上述高强度金刚石制作头。