GM4型磁通门磁力仪性能检验方法

目前,磁通门磁力仪广泛应用于观测地球磁场相对变化的仪器。相对于应用,仪器的性能测试不为人们所熟悉。本文针对GM4型磁通门磁力仪的噪声特性,频率特性,线性度,温度特性等关键性能指标的测试依据、测试方法及流程给予详细的阐述。     

利用海洋温度剖面与海表盐度反演盐度剖面方法研究

为解决海洋中大量观测数据只含有温度剖面而缺乏盐度观测的问题, 基于历史观测的温盐剖面资料, 考虑到盐度卫星数据的发展, 采用回归分析方法, 在孟加拉湾建立了盐度与温度、经纬度、表层盐度的关系, 并对不同反演方法的反演结果进行检验评估。结果发现, 在不引入海表盐度(sea surface salinity, SSS)时, 最佳反演模型是温度、温度的二次项与经纬度确定的回归模型, 而SSS的引入则可以进一步优化反演结果。将反演结果与观测结果进行对比, 显示用反演的盐度剖面计算的比容海面高度误差超过2cm, 而引入SSS后的误差低于1.5cm。SSS的引入能够较为真实地反映海洋盐度场的垂直结构和内部变化特征, 既能够捕捉到对上混合层有重要影响的SSS信号, 又能够反映盐度在跃层上的季节内变化以及盐度障碍层的季节变化。水团分析显示, 与气候态相比, 盐度反演结果可以更好地表征海洋上层水团的变化特征。     

基于GIS技术的三江平原热量资源评价

基于GIS技术,使用黑龙江省气象观测站和农垦、森工系统观测站的气温资料,以及数字高程模型(DEM)资料,运用趋势面分析法和线性内插法得到三江平原栅格化的热量资源数据。分析表明,三江平原纬度和高度因子对各项热量指标分布均有影响,经度因子主要影响年平均气温、4月平均气温、7月平均气温、≥0℃积温和≥10℃积温;佳木斯西部、双鸭山西部、鸡西大部热量资源较丰富,而青黑山、完达山、老爷岭和太平岭等地区热量资源相对较差。分析结果为合理开发利用三江平原热量资源提供了依据。     

Geotechnical Properties of Low Calcium and High Calcium Fly Ash

In this paper, a comparative study has been made for physical and engineering properties of low calcium and high calcium Indian fly ash. The grain size distribution of fly ash is independent of lime content. Fly ash particles of size >75 μm are mostly irregular in shape whereas finer fractions are spherical for low calcium fly ash. For high calcium fly ash, chemical and mineralogical differences have been observed for different size fractions. Compared to low calcium fly ash, optimum moisture content is low and maximum dry density is high for high calcium fly ash. Optimum moisture content is directly proportional and maximum dry density is inversely proportional to the carbon content. The mode and duration of curing have significant effect on strength and stress–strain behavior of compacted fly ash. The gain in strength with time for high calcium fly ash is very high compared to that of low calcium fly ash due to presence of reactive minerals and glassy phase.     

江苏丰、沛、铜地区高氟地下水成因探讨

通过该区太古界一新生界氟的地层地球化学剖面及岩浆岩和土壤中氟的丰度的研究,论证了该区为一高氟的地球化学区。根据重矿物对比研究和地貌分析,阐明了泰沂隆起区太古界和元古界的高氟古老岩系为该区土壤沉积物源,黄河多次泛滥堆积（粘土矿物对氟的吸附）对土壤氟起了叠加富集的作用。研究揭示该区土壤水溶氟较高,经降水淋滤和浸取作用氟转入地下水,并在凹陷区或河间洼地中聚集,水体停泄、蒸发浓缩形成高氟地下水区。     

The effect of anatase, rutile and sodium titanate on the dissolution of boehmite and gibbsite at 90 °C

Industrial plants that refine bauxite to alumina using the high temperature process have always held the belief that anatase was detrimental to the extraction of boehmite while rutile was not. This study shows that this effect is real and that it is observable at temperatures as low as 90 °C. The extraction of gibbsite is shown to be unaffected which leads us to believe that the kinetics of both the Ti-bearing mineral and the Al-bearing mineral is important in this phenomenon. In addition, it is shown that not only is the presence of anatase an issue in boehmite extraction but so too is the presence of sodium titanate. Rutile was found to have the least impact of the three mineral phases.     

Meso‐Cenozoic Tectonothermal History of Permian Strata,Southwestern Weibei Uplift: Insights from Thermochronology and Geothermometry

This study provides an integrated interpretation for the Mesozoic-Cenozoic tectonothermal evolutionary history of the Permian strata in the Qishan area of the southwestern Weibei Uplift, Ordos Basin. Apatite fission-track and apatite/zircon(U-Th)/He thermochronometry, bitumen reflectance, thermal conductivity of rocks, paleotemperature recovery, and basin modeling were used to restore the Meso-Cenozoic tectonothermal history of the Permian Strata. The Triassic AFT data have a pooled age of ～180±7 Ma with one age peak and P(χ2)=86%. The average value of corrected apatite(U-Th)/He age of two Permian sandstones is ～168±4 Ma and a zircon(U-Th)/He age from the Cambrian strata is ～231±14 Ma. Bitumen reflectance and maximum paleotemperature of two Ordovician mudstones are 1.81%, 1.57% and ～210°C, ～196°C respectively. After undergoing a rapid subsidence and increasing temperature in Triassic influenced by intrusive rocks in some areas, the Permian strata experienced four cooling-uplift stages after the time when the maximum paleotemperature reached in late Jurassic:(1) A cooling stage(～163 Ma to ～140 Ma) with temperatures ranging from ～132°C to ～53°C and a cooling rate of ～3°C/Ma, an erosion thickness of ～1900 m and an uplift rate of ～82 m/Ma;(2) A cooling stage(～140 Ma to ～52 Ma) with temperatures ranging from ～53°C to ～47°C and a cooling rate less than ～0.1°C/Ma, an erosion thickness of ～300 m and an uplift rate of ～3 m/Ma;(3)(～52 Ma to ～8 Ma) with ～47°C to ～43°C and ～0.1°C/Ma, an erosion thickness of ～500 m and an uplift rate of ～11 m/Ma;(3)(～8 Ma to present) with ～43°C to ～20°C and ～3°C/Ma, an erosion thickness of ～650 m and an uplift rate of ～81 m/Ma. The tectonothermal evolutionary history of the Qishan area in Triassic was influenced by the interaction of the Qinling Orogeny and the Weibei Uplift, and the south Qishan area had the earliest uplift-cooling time compared to other parts within the Weibei Uplift. The early Eocene at ～52 Ma and the late Miocene at ～8 Ma, as two significant turning points after which both the rate of uplift and the rate of temperature changed rapidly, were two key time for the uplift-cooling history of the Permian strata in the Qishan area of the southwestern Weibei Uplift, Ordos Basin.     

南边界强迫的非线性临界层与副高的形成、维持和振荡

用非线性准地转正压涡度方程模式，在南边界取定常强迫波，采用４种方案模拟了非线性临界层及其上激发的Ｋｅｌｖｉｎ猫眼，以确定热带的定常强迫对副高的形成、维持和振荡的影响。结果表明，南边界定常强迫仍在非线性临界层内激发行星尺度的准定常反气旋的Ｋｅｌｖｉｎ猫眼流场，猫眼的移动、强度和形状变化与夏季副高比较相似．而北边界定常强迫所得结果与夏季副高差异较大。因此，南边界所激发的非线性临界层上的Ｋｅｌｖｉｎ猫眼可能是夏季副高形成、维持和振荡的一种更为重要的新物理机制。文中还提出准定常行星波穿越副热带的非线性临界层的物理机制。     

贵州省优质烤烟气候区划指标的补充和修正

从贵州省优质烤烟气候区划指标出发,结合威宁县高海拔地区种烟的实际情况,详细分析了贵州省优质烤烟气候区划指标。得出表征热量与作物生长发育的关系,不仅要考虑日平均温度和持天数,还要考虑积温、昼夜温差、地温及叶面温度等。通过分析,对原指标中成熟期平均温度。大田生长期温度、旺长－成熟期天数等指标进行了修正。补充≥１０℃活动积温≥２２００℃,移栽期日平均气温≥１４℃,月平均日较左≥８℃等指标。     

Raman spectroscopic study of K-lingunite at various pressures and temperatures

K-lingunite is a high-pressure modification of K-feldspar that possesses the tetragonal hollandite structure. Variations of the Raman spectra of K-lingunite were studied up to ~31.5 GPa at room temperature, and in the range 79–823 K at atmospheric pressure. The Raman frequencies of all bands were observed to increase with increasing pressure, and decrease with increasing temperature for K-lingunite. This behavior is in line with those observed for most of other materials. New sharp Raman bands appear at pressures greater than 13–15 GPa, suggesting a phase transition in K-lingunite with increasing pressure. The transition is reversible when pressure was released. The appearance of these new Raman bands may correspond to the phase transition revealed earlier at around 20 GPa by X-ray diffraction studies. Instead of transforming back to its stable minerals, such as orthoclase, microcline or sanidine, K-lingunite became amorphous in the temperature range 803–823 K at atmospheric pressure.